
Classic glazed yeast donuts are soft, airy rings with a lightly crisp outside and a thin, sweet coating that sets to a delicate sheen. They take a little time to rise, but the dough is straightforward to mix and shape at home.
This version uses a soft, enriched dough and two patient rises for a tender crumb, then fries the rings at a steady temperature so they cook through without soaking up excess oil. Dip them while they are still warm and the glaze clings in a fine, even layer. The result is pleasantly sweet, with buttery, gently yeasty flavor and a fresh-from-the-fryer texture.
Why This Recipe Works
Milk, eggs, butter, and sugar enrich the dough, making the interior softer and more flavorful than a lean bread dough. The dough should feel supple and slightly tacky, not dry. Adding flour cautiously matters: too much makes the donuts dense and can leave them dry after frying.
Kneading develops the gluten that holds the dough together as it rises. The first rise builds flavor and gives the yeast time to produce gas; rolling and cutting after that rise gives the donuts their shape. A second rise lets the cut rings become light and puffy, so they fry up with an airy center rather than a tight, bready one.
Oil temperature is just as important as proofing. At 350°F, the outside colors steadily while the center has time to cook. Oil that is too cool can leave a greasy finish; oil that is too hot can brown the surface before the middle is done. A thermometer makes it much easier to keep the temperature steady between batches.
The glaze is deliberately simple. A little milk loosens the powdered sugar, while vanilla and a small amount of salt keep the sweetness balanced. Dipping warm donuts helps the glaze flow over the curves and set into a thin coating instead of a thick, heavy layer.
Ingredients
- 3/4 cup whole milk, warmed to 105°F to 110°F
- 2 1/4 tsp active dry yeast
- 1/4 cup granulated sugar, plus 1 tsp for the yeast
- 2 large eggs, at room temperature
- 1/4 cup unsalted butter, melted and cooled until just warm
- 1 tsp fine salt
- 1 tsp vanilla extract
- 4 cups all-purpose flour, plus up to 1/2 cup for dusting and adjustments
- 6 cups neutral frying oil, or enough to fill a heavy pot to a depth of about 2 inches
- 2 cups powdered sugar
- 3 tbsp milk for the glaze, plus more if needed
- 1/2 tsp vanilla extract for the glaze
- 1/8 tsp fine salt for the glaze
Ingredient Notes
Milk: Whole milk gives the dough tenderness and a mild richness. Lower-fat milk works, though the crumb may be a little less tender. Warm it gently; milk that is too hot can weaken or kill the yeast.
Yeast: Active dry yeast is dissolved in warm milk before mixing. If using instant yeast, it can be mixed directly into the flour; still warm the milk, and begin checking the rise by appearance rather than relying only on the clock. Yeast should be fresh and properly stored for a reliable rise.
Sugar: The small amount stirred into the yeast helps it disperse, while the rest sweetens and enriches the dough. The donuts are not meant to be very sweet on their own; the glaze supplies most of the sweetness.
Eggs and butter: Eggs help bind the dough and contribute to its soft texture. Unsalted butter adds flavor and tenderness. If using salted butter, reduce the dough salt slightly.
Flour: All-purpose flour makes a manageable dough with a soft crumb. Bread flour can be used for a slightly chewier result, but it may need a little more liquid. Add the listed flour gradually and reserve extra for the work surface; avoid packing flour into the measuring cup.
Frying oil: Choose a neutral oil suited to frying, such as canola, sunflower, or peanut oil if allergies are not a concern. The amount depends on the pot; the important measure is a safe depth that lets the donuts float freely, with plenty of room below the rim.
Glaze: Powdered sugar dissolves smoothly and gives the coating its familiar finish. Whole or lower-fat milk both work. For a dairy-free glaze, use an unsweetened plant milk. Add liquid gradually so the glaze stays thick enough to cling.
Instructions
- Wake the yeast. Stir the warm milk, yeast, and 1 tsp sugar together in a large bowl. Leave it for 5 to 10 minutes. It should look creamy and lightly foamy at the surface; if it remains completely unchanged, the yeast may be inactive or the milk may have been too hot or too cool, so check before continuing.
- Mix the dough. Whisk the remaining 1/4 cup sugar, eggs, melted butter, salt, and vanilla into the yeast mixture. Add 3 1/2 cups flour and mix until a shaggy dough forms, then work in more flour a little at a time. The dough should pull from the sides of the bowl but remain soft and slightly tacky. A stiff, dry dough is harder to knead and makes heavier donuts.
- Knead until elastic. Knead by hand on a lightly floured surface for 8 to 10 minutes, or use a stand mixer with a dough hook on low speed for 5 to 7 minutes. Add only a light dusting of flour if the dough sticks persistently. It is ready when smooth and elastic and it springs back slowly after a gentle press; a small piece should stretch thin before tearing.
- Let the dough rise. Put the dough in a lightly greased bowl and turn it once to coat. Cover and leave in a warm, draft-free place for 60 to 90 minutes, until roughly doubled. The exact time depends on room temperature; judge by the size and softness of the dough rather than trying to force a faster rise.
- Roll and cut. Turn the dough onto a lightly floured surface and roll it to about 1/2 inch thick. Cut rings with a donut cutter or use a wide glass and a smaller cutter for the centers. Transfer the rings to parchment-lined trays, leaving space between them. Gather scraps gently, rest them briefly if they resist rolling, then cut again. Overworking scraps can make the last donuts tougher.
- Proof the cut donuts. Cover the trays loosely and let the rings rise for 30 to 45 minutes. They should look noticeably puffy and feel light; a gentle fingertip press should spring back slowly, leaving a faint impression. If the dough snaps back immediately, give it more time. If it deflates with a touch, it may have risen too far, so fry it promptly and handle it carefully.
- Mix the glaze and prepare the pot. Whisk the powdered sugar, 3 tbsp milk, vanilla, and salt until smooth. Add milk a teaspoon at a time if it is too thick; it should fall from the whisk in a ribbon and settle back into the bowl. Pour the oil into a heavy pot, keeping it no more than halfway full, and heat to 350°F. Set a wire rack over a tray nearby. The oil is ready when a thermometer holds near the target, not just when it looks hot.
- Fry in small batches. Lower a few donuts carefully into the oil, leaving room for them to float without crowding. Fry for about 60 to 90 seconds per side, turning once, until both sides are evenly golden and the centers look set. Keep the oil close to 350°F between batches; wait for it to return to temperature before adding more. Transfer the donuts to the rack with a slotted spoon or spider, letting excess oil drain.
- Glaze while warm. When the donuts are warm but easy to handle, dip one side into the glaze, lift it out, and let the excess drip back into the bowl. Set them glazed-side up on the rack until the coating turns smooth and lightly set. If the glaze becomes too thick as it stands, whisk in a small splash of milk; if it runs off in a clear sheet, whisk in a little more powdered sugar.
Makes about twelve donuts; prep time: 35 minutes; cook time: 20 minutes; total time: about 2 hours 45 minutes, including rising.
Tips for Success
- Check the milk before adding yeast. It should feel warm, not hot, and a thermometer gives the clearest check. Excess heat can stop the yeast from working.
- Measure flour lightly. Spoon it into the cup and level it rather than scooping and compressing. Hold back some flour until you know how the dough feels.
- Use a light touch when shaping. Flour the counter only as much as needed, and avoid pressing hard on the dough while cutting. Keeping the dough airy helps the second rise do its job.
- Keep the oil temperature steady. Fry only a few donuts at a time. A crowded pot cools quickly, and a thermometer helps you adjust the heat between batches.
- Lower donuts gently. Use a slotted utensil and keep your hands clear of the oil. If working with parchment squares under the rings, slide each donut and paper into the oil, then lift the paper out with tongs once it releases.
- Glaze over a rack. A rack lets excess glaze and oil drip away instead of pooling under the donuts. Dip while warm for a thin coating; very hot donuts can make the glaze unusually runny.
- Fry the centers, too. The cut-out pieces cook quickly and make useful temperature and timing guides. Fry them in a separate small batch, watching closely because their smaller size means they brown sooner.
Troubleshooting
The dough has not risen. Give it more time in a comfortably warm, draft-free spot. A cool room slows yeast activity. If there is still no visible change after a long rest, the yeast may have been inactive or damaged by overly hot liquid.
The donuts are dense. Common causes are too much flour, insufficient kneading, or a short second rise. Next time, keep the dough slightly tacky, knead until elastic, and wait for the cut rings to look puffy before frying.
The donuts brown too fast. The oil is likely hotter than intended. Lower the heat and let the temperature settle near 350°F before frying the next batch. If they are dark outside but doughy inside, give each batch more time at a lower, steadier temperature.
The donuts feel greasy. Oil that is too cool or a crowded pot can make them absorb more oil. Fry fewer at a time, allow the oil to return to temperature, and drain the finished donuts on a rack rather than stacking them on a plate.
The glaze is too thin or too thick. Adjust it in small increments: whisk in powdered sugar to thicken it or milk to loosen it. A glaze that is too thin will slide off, while one that is too thick can leave a heavy coating.
The rings lose their shape. The dough may be overproofed or handled roughly after rising. Move the cut rings gently, avoid pressing them down, and fry them as soon as they are puffy and light.
Variations
Glazed donut holes: Fry the cut centers alongside the rings, removing them as soon as they turn golden. Dip them in the same glaze while warm.
Cinnamon sugar: Skip the glaze and toss the warm donuts in a shallow bowl of cinnamon sugar. The coating adheres best while a little surface oil remains.
Citrus glaze: Replace part of the glaze milk with lemon or orange juice and add finely grated zest. Add the juice gradually because its flavor is strong and its acidity can thin the glaze.
Chocolate glaze: Whisk a little unsweetened cocoa powder into the powdered sugar, then add milk gradually until the coating reaches a dipping consistency. Sift the cocoa first to help prevent lumps.
Baked-style donuts: For a less traditional, more breadlike result, arrange the proofed rings on a parchment-lined baking sheet and bake at 350°F for about 9 to 11 minutes, until lightly golden and springy. Dip them in glaze once warm. They will not have the same crisp exterior as fried donuts.
What to Serve With It
Serve the donuts with coffee, tea, or cold milk. Their sweet glaze pairs well with unsweetened drinks, and a bowl of fresh berries makes a simple contrast without competing with the warm vanilla flavor. For a relaxed breakfast spread, add scrambled eggs or plain yogurt on the side rather than making the donuts part of a very sweet menu.
These are at their best shortly after frying, when the centers are especially soft and the glaze is just setting. If serving a group, fry in batches and glaze close to serving time so the first donuts do not sit for too long.
Make-Ahead, Storage and Reheating
For an overnight start, mix and knead the dough, place it in a covered bowl, and refrigerate it promptly. A slow, cold rise can continue overnight. The next day, let the dough warm just enough to roll without feeling stiff, then shape, proof, and fry as directed. If the dough has already doubled in the refrigerator, do not wait for it to double again before shaping.
Fresh glazed donuts are best the day they are made. Keep them in a covered container at cool room temperature and aim to eat them within a day for the best texture. For longer storage, refrigerate them within 2 hours and use within 3 to 4 days; refrigeration can make the crumb firmer. Keep the refrigerator at 40°F or colder.
To freeze, arrange completely cooled, unglazed donuts in a single layer until firm, then transfer them to a freezer-safe container or bag. Freeze for up to 2 to 3 months for best quality. Thaw at room temperature and warm briefly before glazing. Glazed donuts can also be frozen, though the coating may become damp or less smooth as it thaws.
To refresh a plain or glazed donut, warm it in a 300°F oven for 4 to 6 minutes, or microwave it for about 8 to 10 seconds. Use a short interval in the microwave so it softens without turning tough. Do not reheat a donut that has been left out for an extended period or shows signs of spoilage.
Frequently Asked Questions
Can I use instant yeast?
Yes. Mix it with the flour instead of dissolving it in the milk. The dough may rise a little faster, so use the visual cues: it should roughly double during the first rise and look puffy after shaping.
Can I make the dough by hand?
Yes. Stir the ingredients together in a large bowl, then knead on a lightly floured counter until the dough is smooth and elastic. It takes a little effort, but a mixer is not necessary.
Why is the dough sticky?
A soft, slightly tacky dough is expected and helps produce a tender donut. Dust the counter and your hands lightly as needed, but avoid adding large amounts of flour just to make the dough feel dry.
Do I need a donut cutter?
No. A wide drinking glass can cut the outer ring, and a small round cutter can remove the center. Keep the openings clear so the middle cooks evenly.
How can I tell whether the oil is ready without a thermometer?
A small scrap of dough should bubble steadily when added, without immediately turning dark. This is only an approximate check; a thermometer is more reliable because oil temperature changes as you add dough.
Can I reuse the frying oil?
Let the oil cool completely, then strain out crumbs and store it covered in a cool, dark place if it still smells clean and has not become dark, thick, or foamy. Discard oil that smells rancid or has been overheated. Do not pour oil down the drain.
Can I make the glaze without milk?
Yes. Use water or an unsweetened plant milk, adding it a little at a time. Water makes a simpler glaze, while plant milk gives a slightly rounder flavor.
Why did my glaze disappear into the donuts?
The donuts may have been too hot or the glaze too thin. Let them cool until warm rather than steaming, and adjust the glaze with more powdered sugar so it coats the surface instead of soaking in.