This listicle covers ten practical DIY bath tray ideas, from simple repurposed designs to more polished builds. It’s for anyone who wants a sturdy, custom place to rest a book, tablet, or glass of wine while soaking—without paying boutique prices. Each idea includes specific materials and construction notes so you can pick the one that matches your skill level and tools.
1. The Classic Cedar Cradle
Cedar is naturally water-resistant and smells great, making it a top choice for a bath tray. Cut two side rails with a slight curve on the bottom so they rock gently on the tub’s edges, then screw a flat cedar board across the top. Sand everything smooth and finish with a food-safe mineral oil or beeswax to protect the wood.
2. Repurposed Cutting Board
If you have an old wooden cutting board lying around, it can become a bath tray in an afternoon. Add two small blocks of wood underneath each end, positioned to hook over the tub’s rim, and secure them with waterproof glue and screws. This option is nearly free and gives you a solid surface that’s already food-safe.
3. Bamboo Serving Tray Conversion
A bamboo serving tray with raised edges is already the right shape for a bath caddy. Just add a couple of non-slip rubber pads or silicone strips to the bottom edges so it stays put on the tub. The raised lip keeps a book or phone from sliding off, and bamboo handles moisture well without warping.
4. Tension-Mounted Plywood Tray
For a tray that fits any tub width, build a simple plywood plank with two spring-loaded curtain rods attached underneath. The rods press against the tub walls, holding the tray in place without needing hooks or clamps. Use marine-grade plywood or seal regular plywood with several coats of waterproof varnish to prevent swelling.
5. Wine Crate Upcycle
An old wooden wine crate, with its divided compartments, makes a charming bath tray that holds a glass, a book, and a candle in separate slots. Remove any metal staples, sand the wood, and add a clear waterproof sealer. The crate’s natural handles make it easy to lift on and off the tub.
6. Floating Shelf with C-Clamps
Take a small floating shelf—about the length of your tub’s width—and attach two adjustable C-clamps to the underside. Clamp the shelf to the tub’s rim, and you have a sturdy, removable tray that can hold heavier items like a laptop. Wrap the clamp jaws in felt or rubber to avoid scratching the tub’s finish.
7. Acrylic Sheet with Suction Cups
For a modern, see-through look, use a clear acrylic sheet cut to size and attach four strong suction cups to the corners. Press the suction cups onto the tub’s walls or rim, and the tray floats above the water. This design is lightweight, easy to clean, and won’t warp or rot like wood.
8. Copper Pipe Frame Tray
Build a minimalist frame from copper pipes and fittings—two long pipes for the sides and two shorter ones for the ends, joined with elbows. Lay a small wooden board or tempered glass on top to create the tray surface. Copper develops a nice patina over time, but you can also spray it with a clear lacquer to keep it shiny.
9. Slatted Teak Tray
Teak is the gold standard for bathroom wood because it handles humidity and water beautifully. Construct a tray with several parallel slats, leaving small gaps between them for drainage, and attach two side rails that overhang the tub. The gaps let water drip through, so your book stays dry, and the teak needs only occasional oiling.
10. IKEA Hack with a Bamboo Cutting Board
Grab a bamboo cutting board from IKEA (the ones with a juice groove) and add two wooden drawer knobs to the underside, positioned to hook over the tub’s edge. The juice groove becomes a handy slot for a wine glass or phone. This is a low-cost, no-power-tools project that takes about ten minutes.
How to Choose
The most important factor is your tub’s shape—some trays rely on flat rims, while others use tension or clamps. Measure the width of your tub at the point where the tray will rest, and check if the rim is curved or angled. Also consider what you’ll place on it: a heavy book or laptop needs a sturdier base, while a candle and a glass only need a small surface. Finally, think about maintenance—wood requires periodic sealing, while plastic or metal just wipes clean.
Frequently Asked Questions
Will a bath tray fit any tub? Most trays are adjustable or can be customized, but very thick or unusually shaped tub rims may need a tension-mount or clamp design.
What’s the best wood for a bath tray? Teak, cedar, and bamboo are naturally water-resistant; avoid pine or MDF unless you seal them thoroughly.
How do I keep the tray from slipping? Add rubber pads, silicone strips, or suction cups to the contact points, and make sure the tray’s width matches your tub.
Can I use a bath tray with a laptop or tablet? Yes, but choose a sturdy design like the C-clamp or tension-mount tray, and keep electronics away from water splashes.
How do I clean and maintain a wooden bath tray? Wipe it dry after each use, and reapply mineral oil or a waterproof sealant every few months to prevent cracking.
Is it safe to use a glass tray in the bath? Tempered glass is safe, but it can be slippery when wet; add non-slip pads underneath and avoid placing heavy items on the edges.
Final Thoughts
A DIY bath tray is a simple weekend project that adds luxury to your routine without much cost. Whether you repurpose an old cutting board or build a teak slatted tray, the key is matching the design to your tub and your habits. Take your time to measure, seal, and test the fit before you fill the tub—then enjoy your soak with everything within reach.