Yes, smart bulbs use a small amount of electricity when they are turned off. This is because they remain connected to your home’s Wi-Fi or Bluetooth network, waiting for a command to turn on, change color, or adjust brightness. The power draw is minimal—typically a fraction of a watt—but it is not zero.
Why Smart Bulbs Always Draw Power
Unlike a traditional incandescent bulb, which has a simple on/off switch, a smart bulb contains a tiny computer chip and a wireless radio. These components need a constant power supply to stay in standby mode. When you turn the bulb off using the app or a voice assistant, you are actually sending a signal that tells the bulb to switch its light-emitting part off, but the electronics inside remain powered.
This is similar to how a television or a microwave keeps a small clock running even when it is not in use. The bulb is never truly ‘off’—it is in a low-power standby state, always listening for a command.
How Much Electricity Does a Smart Bulb Use in Standby?
The exact amount varies by brand and model, but most smart bulbs consume between a fraction of a watt and a couple of watts in standby mode. To put that in perspective, a typical LED smart bulb uses around a handful of watts when fully lit. The standby draw is so small that it would take many bulbs, running for months, to equal the electricity used by one bulb shining for a single evening.
Over a year, a single smart bulb in standby mode might add a few cents to your electricity bill. If you have a whole house full of smart bulbs, the cost is still modest, but it is not completely free.
Does Turning Off the Switch Save More Energy?
Yes, if you physically flip the wall switch that controls the bulb’s socket, you cut all power to the bulb. This completely eliminates the standby draw. However, doing so disables the smart features—you won’t be able to control the bulb remotely, set schedules, or use voice commands. The bulb will simply act like a regular bulb, turning on and off with the switch.
If you want to save the tiny standby energy but still keep smart functionality, you could use a smart switch instead of a smart bulb. A smart switch replaces the wall switch itself and can cut power to the bulb entirely while still allowing remote control, because the switch itself stays powered.
How to Check If Your Smart Bulb Is Using Standby Power
You can measure the standby draw with a plug-in power meter, a device that plugs into the wall and tells you how much electricity the bulb is using. Simply plug the smart bulb into the meter, turn the bulb off via the app, and read the wattage. It will likely show a small number, confirming the standby draw.
If you don’t have a meter, you can look up the specifications for your specific bulb model. Many manufacturers list the standby power consumption in the product manual or on their website.
Common Misconception: ‘Off’ Means Off
Many people assume that when a smart bulb is turned off, it is completely de-energized. This is not the case. The bulb’s internal electronics remain active, and in some cases, the bulb may even emit a faint glow or a visible light from its internal components. This is not a defect; it is a sign that the bulb is still receiving power.
Another misconception is that smart bulbs use more electricity than regular LED bulbs. In reality, when they are on, they use about the same amount of energy as a standard LED. The extra cost comes only from the standby draw, which is very small.
How to Choose a Low-Standby Smart Bulb
If you are concerned about standby power, look for bulbs that specifically advertise low standby consumption. Some brands are more efficient than others. Check the product specifications for a ‘standby power’ rating—it is usually listed in watts. A bulb with a standby draw of a fraction of a watt is better than one that draws a full watt.
Also consider the type of wireless protocol. Wi-Fi bulbs tend to draw slightly more power in standby because they need to maintain a constant connection to your router. Zigbee and Z-Wave bulbs, which use a separate hub, often have lower standby draw because they use a low-power mesh network.
Alternatives to Smart Bulbs
If you want smart lighting but want to avoid standby power entirely, consider smart plugs or smart switches. A smart plug sits between the wall outlet and your lamp, and it can cut power to the lamp completely when you turn it off. The plug itself still draws a small amount of power, but the lamp does not.
Smart switches, as mentioned earlier, replace your wall switch and can cut power to the bulb entirely. They are a good option for hardwired ceiling lights.
Frequently Asked Questions
Will smart bulbs increase my electricity bill significantly? No. The standby draw is so small that even with several bulbs, the annual cost is usually only a few dollars at most. The energy used to light the bulb when it is on is the main factor.
Can I turn off a smart bulb completely without losing smart features? Not with the bulb itself. You can use a smart switch or a smart plug to cut power to the bulb, but then the bulb loses its smart capability. The switch or plug will still be controllable.
Do smart bulbs wear out faster because they are always on standby? No. The electronics in a smart bulb are designed to be powered continuously. The LED part of the bulb has a long rated lifespan, and the standby power does not significantly affect it.
Why does my smart bulb glow slightly when it is off? This can happen if the wall switch has a small indicator light or if the wiring has a tiny leakage current. It is usually harmless, but if it bothers you, you can replace the switch with a model that has no indicator light.