These 10 easy crochet plant hanger ideas range from sturdy crocheted pots to open net-style slings, with options for round, square, and very small containers. They’re for beginners who know a few basic stitches as well as crocheters looking for a quick, practical project; each description points out the construction choices that affect fit, yarn use, and hanging.
1. Simple Single-Crochet Basket Hanger
This is a useful first project: crochet a flat circle for the pot’s base, then work single crochet stitches around without increasing to form a shallow cup. Make the base just a little smaller than the pot bottom, and check the fit as the sides rise so the container sits snugly rather than slipping through; a removable nursery pot can be easier to fit than a tapered decorative cachepot. Cotton yarn or cotton cord gives the stitches a defined shape, while a larger hook makes a softer, more flexible basket. Finish with four evenly spaced chain loops or crocheted straps, join them above the pot, and add a separate hanging ring if desired.
2. Open Mesh Net
A mesh hanger uses chain spaces separated by stitches, creating an airy net rather than a solid fabric cup. Start with a small crocheted ring or a few chains joined into a circle, then build a base and repeat rounds of chain spaces; increase the number or length of those spaces gradually to make room for the pot. This style is especially forgiving when the container is slightly wider near the rim, because the open fabric can expand around it, though the bottom still needs enough stitches to support the base. Use a pot to check the net’s dimensions during construction, and keep the chains consistent so the hanger doesn’t lean.
3. Granny-Square Sling
For a colorful option, make four small granny squares and join them into a cross-shaped sling that folds up around the pot. Each square can use double crochet clusters worked into chain spaces, so the project is a good way to practice a familiar motif without committing to a large blanket. Leave the corner points available for straps, or crochet a sturdy joining edge around the assembled panels before adding four hanging chains. The openings between clusters create a decorative look, but check that the pot cannot push through the center; a small, close-fitting inner basket or nursery pot can help keep the container supported.
4. Four-Strand Chain Hanger
This minimalist design has no crocheted basket: four long chains hold the pot at intervals, with a small crocheted ring or joined loop at the top. Crochet each chain to the same measured length, attach them securely around a lower ring, and add a few crocheted connecting rounds or knots at the height where the pot’s body is widest. The open structure uses little yarn and works well with a lightweight plastic pot, but it depends on careful spacing because unsupported gaps can let a narrow container tilt or slip. Before hanging a plant, test the empty hanger with the intended pot and adjust the chain positions until it sits level.
5. Ribbed Basket With Back-Loop Stitches
To make a simple basket look textured, work single crochet through the back loop only after completing a flat circular base. Those rounds create raised horizontal ridges and a flexible fabric that can hug a nursery pot; the stitch pattern is repetitive, so it is approachable once the base increases are finished. Keep the increase rounds in the bottom distinct from the straight side rounds, since continuing to increase up the walls can make the basket flare and lose its grip. Add four evenly spaced straps at the rim, checking that each attachment is reinforced with several stitches rather than relying on a single loop.
6. Three-Strap Cradle
A three-strap cradle is a compact alternative to four hanging arms: crochet a small circular or oval base, then attach three straps at evenly spaced points around its edge. The straps can be made from tightly worked chains reinforced with slip stitches or single crochet, and they meet at a joined loop above the pot. This layout leaves more of the container visible and is straightforward to assemble, but the three attachment points need to be balanced so the pot hangs upright instead of tipping toward one side. Use the actual pot as a template when marking attachment positions, and make the straps equal in length before joining them.
7. Square-Bottom Pot Sleeve
For a square or rectangular planter, a round basket can fit awkwardly, so crochet a square base and continue with straight sides. Work a square by increasing at its corners, then stop increasing once the base matches the planter’s footprint; single crochet gives a firm surface, while double crochet makes a looser, quicker fabric. Add four corner straps or crochet a short band around the rim before attaching the hanger arms, which helps distribute the pull across the sides. Measure the planter at its widest point as well as across the bottom, because tapered square pots may be narrower where they sit than at the rim.
8. Gathered Top With a Drawstring
This design uses a short crocheted basket or net with a final round of chain spaces that form a drawstring channel. Thread a length of sturdy crochet cord through the openings, place the pot inside, and draw the cord gently so the top closes around the container without covering its rim. The adjustable opening makes the hanger useful for pots with slightly different upper widths, but it does not compensate for a base that is too large or too small. Add separate straps for hanging rather than treating the drawstring as the only support, and leave the pot easy to remove for watering or checking the soil.
9. Two-Color Striped Hanger
Use leftover yarn to make a solid-sided basket with simple horizontal stripes, changing colors at the beginning of a round. Single crochet produces compact stripes that make it easy to see where each round begins, while alternating two colors every few rounds avoids frequent yarn changes and excessive ends to weave in. Choose yarns with similar thickness and fiber behavior so the sides do not buckle where one color is heavier or stretchier than the other. This is a practical way to use small remnants, but keep the bottom and straps in a consistent yarn if possible, since those parts experience more direct tension than the decorative side rounds.
10. Small Holder for a Propagation Jar
A tiny crocheted sleeve can hold a narrow propagation jar or small glass vessel, using a circular base and short sides sized to the jar’s lower portion. Add a few slim straps and a joining loop, leaving the jar opening unobstructed so cuttings can be reached and water can be changed without removing the whole hanger. Glass filled with water is heavier than an empty container, so this is best kept small and hung only from a secure, appropriate support; crochet itself does not establish the safe load of a ceiling hook or wall fixture. Make the sleeve close-fitting, keep the glass upright, and avoid placing it above people or objects that could be damaged if it fell.
How to Choose
Start with the pot, not the stitch pattern. Measure its bottom, widest point, and height, then decide whether the hanger should hold a removable nursery pot or a decorative cover pot; their shapes can differ considerably. A solid basket or square sleeve offers more contact with the container, while mesh and strap designs use less yarn and show more of the pot. For a first project, a small single-crochet basket or a basic mesh net keeps the construction simple, and a granny-square sling is a good choice if you already enjoy making motifs.
Next, consider yarn and construction. Cotton yarn and cotton cord are common choices for plant hangers because they make defined stitches, but fiber, thickness, hook size, and stitch tension all affect how much a finished piece stretches. Check the yarn label for care guidance, and remember that a crocheted hanger is not automatically washable or suitable for prolonged moisture. Make the straps evenly and attach them across several stitches; a decorative chain alone may stretch more than a denser crocheted strap. Finally, think about the complete hanging setup: the pot, damp potting mix, plant, hanger, and hardware all contribute to the load, and the mounting point must be suitable for it. Test the fit and stability close to the floor before choosing a permanent spot.
Frequently Asked Questions
What yarn is best for a crochet plant hanger?
Cotton yarn or cotton cord is a common choice because it gives clear stitch definition and is available in many weights. The finished strength and stretch depend on the yarn, stitch, hook, and construction, so make a hanger appropriate to the pot and test it rather than assuming any fiber will support any load.
How do I size a crochet hanger for my pot?
Measure the pot’s base and widest point, then compare those measurements with the base and opening of the crochet piece as you work. A close fit helps prevent slipping, but leave enough room to insert and remove the pot without forcing the stitches.
Can I crochet a plant hanger with acrylic yarn?
Yes, acrylic yarn can be used, especially for a lightweight decorative hanger, but it may behave differently from cotton and can stretch under a sustained load. Check the fabric as you work and choose a construction and hanging support suitable for the actual pot and plant.
Can I hang a plant hanger from a ceiling hook?
Only if the hook and the structure it is mounted into are appropriate for the full load. A hook’s appearance alone does not confirm its capacity; account for the pot, wet growing medium, plant, and hanger, and seek qualified help if you are unsure about the mounting point.
How do I keep a crochet hanger from stretching?
Use a firm, consistent stitch, avoid making the straps overly loose, and distribute their attachment points evenly. You can also test the finished hanger with the intended pot near the floor and check for sagging before putting it in its final location.
Final Thoughts
An easy crochet plant hanger can be as simple as a single-crochet basket or as open as a chain-and-mesh sling. Choose a design that matches the shape of your pot, build the straps carefully, and treat the hanging hardware as a separate part of the project that needs its own suitability check.