
Ermine frosting is a light, silky buttercream made by cooking milk and flour into a thick paste, then whipping that cooled paste into butter and sugar. It pipes and spreads like frosting, but its texture is softer and less sugary than many American buttercreams.
This version keeps the method simple: cook the ingredients gently until the flour is fully thickened, cool the mixture completely, then beat it into fluffy butter. The result is smooth, creamy, and delicately vanilla-flavored, with a mild sweetness that lets cake flavors come through. It looks pale ivory rather than stark white because it contains butter and vanilla.
Why This Recipe Works
Cooking the flour with cold milk before heating helps disperse it evenly and prevents dry pockets from turning into lumps. Adding the sugar to the milk mixture gives it time to dissolve as the paste cooks, so the finished frosting is less likely to feel gritty.
The paste must cool to room temperature before it meets the butter. Warm paste melts butter and can make the frosting loose or greasy; paste that is much colder than the butter can make the mixture look curdled. Aim for both components to be soft and close in temperature.
Whipping the butter first builds air into the frosting. Adding the cooled paste a spoonful at a time gives the two mixtures time to combine gradually, creating a stable, smooth emulsion instead of a dense or separated one. A stand mixer is convenient, but a hand mixer works well too.
Ingredients
- 1 cup (240 ml) whole milk
- 4 tablespoons (30 g) all-purpose flour
- 1 cup (200 g) granulated sugar
- 1 cup (226 g) unsalted butter, softened
- 2 teaspoons (10 ml) vanilla extract
- 1/4 teaspoon (1.5 g) fine salt
Ingredient Notes
Whole milk supplies the liquid for the cooked paste and gives it a pleasantly creamy flavor. Two-percent milk can work, though the frosting may taste a little less rich. Avoid replacing it with a very low-fat milk if you want the fullest texture. Unsweetened oat or soy milk can be used, but the finished flavor and consistency may vary by product.
All-purpose flour thickens the milk and holds the frosting together. Measure it by spooning it into the measuring spoon and leveling it, rather than packing it tightly. A gluten-free all-purpose flour blend may work if it is designed for baking, but blends differ; the paste may need slightly more or less cooking to become thick. Do not substitute cornstarch in the same quantity, since it thickens differently and can leave a slick texture.
Granulated sugar sweetens the frosting and dissolves into the milk mixture as it cooks. Regular granulated sugar is the dependable choice here. Coarse sugar may take longer to dissolve; powdered sugar is not a direct substitute because it contains starch and behaves differently.
Unsalted butter gives the frosting its structure and rich, clean flavor. It should be pliable but not shiny, oily, or melting; a cool room around 65°F to 68°F is a useful target. If you only have salted butter, omit the added salt and taste before adding any more. A firm baking-style plant butter may be used for a dairy-free variation, but soft tub spreads are too loose for a reliable result.
Vanilla and salt round out the flavor. Pure or imitation vanilla extract both work; either can tint the frosting slightly. Fine salt disperses most evenly. If using a coarse salt, dissolve it in the milk mixture rather than adding it directly to the finished frosting.
Instructions
- Make the milk paste. In a medium saucepan, whisk the cold milk, flour, sugar, and salt until no flour clumps remain. Set the pan over medium heat and whisk constantly, scraping the corners and bottom. After about 5 to 8 minutes, the mixture should become very thick, glossy, and pudding-like, with slow bubbles breaking at the surface. This sustained heating cooks the flour and helps dissolve the sugar; take the pan off the heat as soon as the paste is thick, rather than letting it scorch.
- Cool the paste completely. Scrape it into a shallow bowl and press food-safe wrap directly against the surface to prevent a skin. Let it cool at room temperature until it is no warmer than 70°F, usually about 1 hour, then refrigerate briefly if needed. The paste should be cool but not refrigerator-cold when you mix it with the butter. Cooling it fully protects the butter from melting and keeps the frosting thick.
- Whip the butter. Put the softened butter in a large bowl and beat on medium-high speed for 3 to 5 minutes, stopping once to scrape the bowl. It should look noticeably paler, fluffy, and smooth, with no firm chunks. This step adds air and makes the finished frosting lighter; if the butter is greasy or very soft, chill it briefly before continuing.
- Beat in the cooled paste gradually. Add the paste one spoonful at a time while mixing on medium speed. Scrape the bowl as needed, and wait for each addition to disappear before adding the next. Once all the paste is incorporated, beat for another 2 to 3 minutes. The frosting should look satiny and hold soft peaks. Gradual addition lets the butter and paste emulsify evenly.
- Finish with vanilla and check the texture. Beat in the vanilla for about 30 seconds. Taste the frosting and adjust the salt only if needed. If it is smooth and spreadable, use it right away. If it is loose, chill it for 10 to 15 minutes and beat again; if it looks curdled, see the troubleshooting section before adding anything else.
Makes: enough to frost one two-layer 8-inch cake; prep: 15 min; cook: 8 min; total: about 2 hr 3 min, including cooling.
Tips for Success
- Whisk before turning on the heat. Flour disperses more easily in cold milk. Scrape the pan’s edges often once it warms, since paste can catch there before the center looks thick.
- Cook until the paste is genuinely thick. It should mound briefly when lifted with a whisk, not run like custard. An undercooked paste can leave a raw flour taste and make the frosting too soft.
- Cover the paste while it cools. Pressing wrap against its surface stops a dry skin from forming. If a skin does form, remove it rather than beating it into the frosting.
- Match temperatures. The butter and paste should both be soft and close to room temperature. If one is cold and the other warm, the frosting may look lumpy or split.
- Add the paste slowly. A few extra minutes of gradual mixing are more useful than dumping it all in at once. Scrape the bowl so no firm butter remains hidden along the bottom.
- Use a clean, dry bowl and beaters. Water or crumbs can affect the texture and make a pale frosting look speckled. For the palest result, use clear vanilla, while understanding that butter still gives the frosting an ivory tone.
- Frost a fully cooled cake. Even a slightly warm cake can soften the buttercream and make it slide. If the frosting firms up while you work, beat it briefly until spreadable instead of warming it aggressively.
Troubleshooting
The frosting looks curdled or grainy. It is often a temperature mismatch. If the bowl feels cool, let it stand briefly and beat on medium speed; if it feels warm or the frosting looks oily, chill it for 10 minutes, then beat again. It may look worse before the butter and paste come back together, so give it a little time.
The frosting is runny. The paste may have been too warm, the butter may have softened too much, or the paste may not have cooked thick enough. Refrigerate the bowl for 10 to 15 minutes, then beat until it holds its shape. If it remains loose, chill it once more. Avoid adding a large amount of flour or powdered sugar, which changes the texture and flavor.
The frosting feels gritty. The sugar may not have dissolved fully. Next time, keep whisking the milk mixture as it cooks and make sure it reaches the thick, bubbling stage. For this batch, continued beating may soften slight graininess, but it will not reliably dissolve large sugar crystals after the frosting is assembled.
There are lumps in the paste. They usually form when flour is not whisked into cold milk thoroughly or when the pan is not stirred continuously. If the paste is still hot, whisk vigorously; if lumps remain, press it through a fine-mesh sieve before cooling. Remove any cooked-on bits rather than scraping them into the bowl.
The frosting tastes floury. The paste likely needed more time on the heat. Cook it until thick and bubbling, whisking constantly, before cooling. Once the frosting is finished, the raw flavor cannot be corrected by simply beating it longer.
It is too soft for piping. Chill the finished frosting for 10 to 15 minutes, then beat it briefly. A warm room can soften buttercream quickly, so keep the bowl cool and avoid holding a filled piping bag in warm hands for a long time.
Variations
Chocolate ermine frosting: Beat in unsweetened cocoa powder a little at a time after the paste has been incorporated, tasting as you go. Sift the cocoa first to avoid dry pockets. Cocoa thickens the frosting, so add a small splash of milk only if the texture becomes too firm.
Citrus: Add finely grated lemon or orange zest with the vanilla. The zest gives a fresh aroma without adding much liquid. A little citrus juice can be added for a sharper flavor, but too much may loosen the frosting.
Coffee: Dissolve instant espresso powder in a teaspoon of hot water, cool it completely, and beat it in sparingly with the vanilla. Keep the amount modest so the frosting stays thick.
Dairy-free: Use an unsweetened plant milk and a firm baking-style plant butter. The milk paste may thicken at a different pace, and the final frosting may be softer or taste different from the butter-and-whole-milk version. Chill it as needed before spreading.
Less sweet: The recipe is already less sweet-tasting than many buttercreams because the cooked paste softens the impression of sugar. Do not reduce the sugar substantially: it contributes to the balance and texture, not just sweetness.
What to Serve With It
This frosting works especially well with vanilla, chocolate, spice, and red velvet cakes, where a smooth, mild frosting complements a more distinctive crumb. Use it to fill and cover layer cakes, frost cupcakes, or spread between cake layers with fruit preserves. It is also good with simple snack cakes and sheet cakes when you want a soft finish rather than a very sweet crust.
Because it is not as firm as some buttercreams, keep decorations simple if the cake will sit in a warm room. It can be piped into soft swirls and borders, but intricate shapes hold best when the frosting and cake are cool.
Make-Ahead, Storage and Reheating
The cooked milk paste can be made ahead. Cover it closely and refrigerate it for up to 2 days. Before using, bring it toward room temperature until it is soft and cool, not warm. If liquid has collected around it, stir it back in gently; do not use paste that has been left out for more than 2 hours.
Refrigerate finished frosting promptly in a covered container. For food safety, do not leave it at room temperature for more than 2 hours, or more than 1 hour when the temperature is above 90°F. Refrigerated leftovers keep for 3 to 4 days. Let the frosting soften at room temperature until spreadable, then beat it briefly to restore a smooth texture. Do not microwave it to warm it, since uneven heat can melt the butter.
For longer storage, freeze the frosting in an airtight container for up to 2 months for best quality. Thaw it in the refrigerator, then let it soften until cool and pliable before beating. A separated look after thawing is common; beat it patiently until it becomes smooth again. Keep the frosting cold during thawing and do not refreeze it after it has been left out.
Frequently Asked Questions
What is ermine frosting?
It is a buttercream made by combining whipped butter with a cooked milk-and-flour paste. The paste gives it body and a soft, silky texture without relying on a large amount of powdered sugar.
Does ermine frosting taste like flour?
It should not. The flour is cooked with milk until the mixture is thick and bubbling, which removes the raw flour flavor. If the finished frosting tastes floury, the paste probably needed more cooking.
Can I make it without a stand mixer?
Yes. A hand mixer can whip the butter and combine the paste. It may take a little longer, and scraping the bowl carefully matters, but the method is the same.
Can I make the frosting ahead?
Yes. Make it ahead and refrigerate it in a covered container for up to 3 to 4 days, or freeze it for up to 2 months for best quality. Let it soften until pliable and beat it again before frosting the cake.
Can ermine frosting sit out on a cake?
Keep the cake at room temperature only for a limited serving period. Because this frosting contains milk, follow the two-hour room-temperature limit, or the one-hour limit when the temperature is above 90°F; refrigerate the cake for longer storage.
Why is my frosting not pure white?
Butter is naturally yellow, and vanilla extract can add color. The finished frosting is usually pale ivory. Clear vanilla can reduce the tint, but it will not remove the butter’s natural color.
Can I color ermine frosting?
Yes. Add a small amount of food coloring after the frosting is smooth and beat until evenly colored. Add color gradually; excess liquid can soften the frosting, and darker shades may deepen as they stand.
Is ermine frosting suitable for piping?
It can be piped for swirls, borders, and simple decorations. It is softer than some stiff buttercreams, so chill it briefly if it feels slack and avoid detailed piping in a warm room.