Uneven concrete driveways are more than an eyesore—they create trip hazards, trap water, and can signal deeper problems. This guide covers ten practical methods to level or repair your driveway, from quick DIY fixes to professional-grade solutions. Whether you’re a homeowner tackling a weekend project or someone planning a full replacement, you’ll find the right approach here.
1. Mudjacking (Slab Jacking)
Mudjacking involves drilling small holes into the sunken slab and pumping a slurry of soil, cement, and water underneath to lift it back to level. It’s a proven, cost-effective method for driveways that have settled due to soft or eroded subsoil. The slurry hardens within a day, and you can usually drive on it after that. Best for slabs that are still intact but have dropped an inch or more.
2. Polyurethane Foam Lifting
This modern alternative to mudjacking uses high-density polyurethane foam injected through tiny holes. The foam expands and cures in minutes, lifting the slab precisely and sealing voids. It’s cleaner, requires fewer holes, and the foam is lighter than slurry, so it won’t add much weight to the soil. Expect to pay more than mudjacking, but the result is faster and often more durable.
3. Concrete Leveling Compound (Self-Leveling Overlay)
For minor surface unevenness—not structural settling—a self-leveling concrete overlay can smooth things out. These polymer-modified compounds pour over the existing slab and flow into low spots, creating a new, level surface. They’re ideal for driveways with cracks or spalling but no major dips. You’ll need to clean and etch the old concrete first for proper bonding. This is a DIY-friendly option for small areas.
4. Grinding Down High Spots
If your driveway is uneven because certain slabs have heaved upward, grinding can shave down the high edges. A concrete grinder with diamond discs can remove a quarter-inch or more of surface material. This is a quick fix for trip hazards at expansion joints or where one slab sits higher than its neighbor. It’s dusty work, so wear a respirator and protect nearby surfaces. Grinding won’t fix low spots, but it can make a dangerous lip safe.
5. Crack Repair and Sealing
Unevenness often starts with cracks that let water in and wash out the base. Filling cracks with a flexible polyurea or epoxy sealant prevents further settling. For wider cracks, use a backer rod and a self-leveling sealant. This doesn’t fix existing unevenness, but it stops the problem from getting worse. Do this before any leveling method to ensure a stable base.
6. Replacing Individual Slabs
If one or two slabs are severely broken or sunken beyond repair, removing and repouring them is the most direct fix. Break up the damaged concrete, excavate the soft soil, add a compacted gravel base, and pour fresh concrete. This gives you a perfectly level section that matches the rest if you match the mix and finish. It’s labor-intensive but avoids the cost of a full driveway replacement.
7. Asphalt Overlay (Thin Concrete Overlay)
For driveways with widespread surface wear but a sound base, a thin concrete overlay (about an inch thick) can be applied over the old slab. This is different from self-leveling compound—it’s a polymer-modified concrete that bonds strongly and can be troweled to a smooth finish. It won’t fix major dips, but it hides minor unevenness and gives a fresh surface. Professional installation is recommended for best results.
8. Drainage Correction
Many uneven driveways are caused by water pooling under the slab. If you notice puddles or runoff flowing toward the house, correcting drainage can prevent further settling. Install a French drain along the edge, regrade the soil, or extend downspouts away from the driveway. This isn’t a direct fix, but it’s essential to do alongside any leveling method. Without it, your new level surface won’t stay level for long.
9. Polyurea Joint Filler
Expansion joints that have become uneven can be filled with a semi-rigid polyurea compound. This material bridges gaps and creates a smooth transition between slabs. It’s more durable than typical caulk and can be tooled to match the surrounding surface. This is a good option for driveways with multiple small joints that trip you up. It’s a simple DIY job that takes a few hours.
10. Full Replacement
When the driveway is crumbling, severely uneven, or has a failing base, replacement is the only lasting solution. This involves removing all old concrete, excavating several inches, compacting a proper gravel base, and pouring new reinforced concrete. It’s the most expensive option, but it gives you a smooth, level surface for decades. Consider this if more than half the driveway is damaged or if leveling methods have already failed.
How to Choose
Start by diagnosing the cause: is it settlement, heaving, or surface wear? For small areas with intact slabs, grinding or self-leveling compound works. For sunken slabs, mudjacking or foam lifting are best. If cracks are the issue, seal them first and then level. Always check drainage—fixing water flow can prevent recurrence. Budget and DIY skill matter too: grinding and crack filling are weekend projects, while mudjacking and replacement need pros. Get quotes from at least two contractors for any method that involves pumping or repouring.
Frequently Asked Questions
Can I fix an uneven driveway myself? Yes, for minor issues like grinding or crack filling. Mudjacking and foam lifting require special equipment and are best left to professionals.
How long does foam lifting last? Polyurethane foam is stable and can last for years, often longer than mudjacking, because it doesn’t wash away.
Will leveling fix the cracks? No, leveling lifts the slab but doesn’t seal cracks. You need to fill cracks separately to prevent water intrusion.
Is mudjacking messy? It can be—the slurry is wet and may splatter. Pros use containment mats, but expect some cleanup.
Can I drive on the driveway right after? For foam lifting, usually within an hour. For mudjacking, wait a day. For overlays, follow the manufacturer’s cure time.
How do I know if my driveway is worth fixing? If the concrete is sound and the unevenness is under a couple of inches, leveling is worth it. If it’s crumbling or the base is gone, replacement is better.
Final Thoughts
An uneven driveway doesn’t have to stay that way. Start with the simplest fix that addresses the root cause, and don’t skip drainage improvements. Whether you choose a DIY grind or hire a pro for foam lifting, the result will be a safer, smoother surface that adds curb appeal. Take the time to assess the damage honestly—your driveway will thank you.