
Homemade cake release—often called cake goop—is a simple blend of equal parts flour, vegetable oil, and shortening. Brush a thin layer inside a cake pan before adding batter, and it helps the baked cake release cleanly, including from detailed Bundt pans and other shapes that can be tricky to grease by hand.
This version keeps the classic equal-parts formula and explains how to mix, apply, and store it without making a mess. It is not a sweet topping or a cake batter: it tastes like its ingredients, mildly floury and neutral, and is meant to stay on the pan rather than be eaten on its own.
Why This Recipe Works
The three ingredients do different jobs. Flour forms a fine, dry coating against the pan; oil spreads easily and stays fluid; shortening is soft enough to brush but firm enough to help the coating cling. Mixed thoroughly, they make a paste that reaches corners and patterned grooves more evenly than a quick swipe of solid fat.
Equal parts by volume make the formula easy to remember and scale. The mixture should be smooth and spreadable, not stiff like dough or runny like plain oil. Applying a thin, continuous coat matters more than using a generous amount: a thick layer can leave a floury film or pool in the bottom of the pan.
There is no baking step for cake release itself. It is a pan coating, so the oven temperature and bake time belong to the cake recipe you are making. Use that recipe’s directions rather than baking this mixture by itself.
Ingredients
- 1/2 cup all-purpose flour, spooned into the measuring cup and leveled (or 1/2 cup gluten-free all-purpose flour blend for a gluten-free version)
- 1/2 cup neutral vegetable oil, such as canola or standard vegetable oil (or 1/2 cup melted coconut oil for a dairy-free option; cool it until just warm and still pourable)
- 1/2 cup vegetable shortening, softened but not melted (or 1/2 cup dairy-free shortening)
Ingredient Notes
All-purpose flour: Flour supplies the dry barrier between the pan and cake. Measure it by spooning it lightly into the cup and leveling the top; dipping the cup into the bag can pack in extra flour and make the finished paste too thick. For a gluten-free batch, use a cup-for-cup gluten-free flour blend intended for baking. Avoid substituting almond or coconut flour: they absorb and behave differently, so the equal-volume ratio may not make a brushable coating.
Vegetable oil: A neutral oil loosens the shortening and helps the mixture glide into small details. Canola, soybean, or another mild vegetable oil works. Olive oil can bring a noticeable flavor and is not the best choice when you want a neutral coating. Melted coconut oil works as the dairy-free alternative; if it is hot, let it cool before mixing so it does not soften the shortening excessively.
Shortening: Shortening gives the blend body and helps it hold together as a coating. Use it softened enough to mix easily, but not liquid. Dairy-free shortening is a direct substitute when needed. Butter is not a like-for-like replacement: it contains water and milk solids, which change the texture and browning of the coating.
Instructions
- Measure the ingredients. Measure 1/2 cup flour, 1/2 cup oil, and 1/2 cup softened shortening. The flour should be level, and the shortening should yield to a spoon without looking melted. Accurate equal volumes help the mixture spread as a paste rather than separate into oil and dry flour.
- Mix until completely smooth. Put the shortening in a medium bowl and stir or beat it briefly to soften any firm lumps. Add the oil gradually, then mix in the flour. Scrape the sides and bottom of the bowl and continue stirring until there are no visible flour pockets or streaks of oil. The finished mixture should look uniform and feel like a loose, soft paste. If it is lumpy, keep mixing; if the shortening is cold, let the bowl sit briefly at room temperature and stir again.
- Transfer and label. Spoon the mixture into a clean, dry, airtight container. Write the contents and date on the container, and keep a dedicated pastry brush with it if convenient. A clean container and dry utensil help avoid introducing water or cake crumbs, which can spoil the texture or contaminate the batch.
- Prepare the cake pan just before filling it. Use a clean, dry pastry brush to spread a thin, even coat over the pan’s base, sides, corners, and any ridges or flutes. Look for a faint, continuous sheen with no bare spots, clumps, or puddles. The coating should be thin enough that the metal or pan color is still visible through it. A heavy coat can bake into a floury layer instead of improving release.
- Add batter and bake according to the cake recipe. Pour the batter into the prepared pan and use the cake recipe’s oven temperature and baking time. For example, if that recipe specifies 350°F (175°C), preheat to that temperature; do not use 350°F as a universal setting for every cake. The release mixture is not baked on its own, and different batters and pan sizes need different bake times. Check the cake using the doneness cues in its recipe, such as a clean tester where appropriate and a cake that springs back lightly when touched.
- Release the cake as directed by its recipe. After baking, follow the recipe’s cooling instructions before turning the cake out. Some cakes release best after a short rest; others need to cool longer. Once the cake is ready, loosen any accessible edges gently and invert it onto a rack or serving plate. A clean release comes from both an even pan coating and the right cooling interval, not from pulling a hot, fragile cake out too soon.
Tips for Success
- Use equal volumes, not equal weights. The traditional formula is measured by volume. Because flour, oil, and shortening have different densities, weighing the same number of grams of each would not give equal parts in this recipe.
- Keep the flour light in the cup. Spoon it in and level it rather than pressing or scooping it. Too much flour makes a stiff mixture that can leave visible pale patches inside the baked cake.
- Start with softened shortening. If it is refrigerator-cold, it can remain in small pieces that are difficult to blend evenly. Let it soften until easily stirred; do not melt it to speed things up.
- Use a dry brush and dry pan. Water droplets can make the paste streak or slide. Wash the pan, dry it thoroughly, then coat it right before adding batter.
- Coat grooves first. On a Bundt or patterned pan, brush into the deepest ridges and narrow details before sweeping over broad surfaces. Work around the pan methodically so you can see whether you missed a spot.
- Use a light hand. A thin, complete film is the goal. If you see a mound of paste or a pool at the bottom, brush it out or wipe away the extra with a clean paper towel.
- Do not taste the mixture. It contains raw flour, which is not ready-to-eat. Use it only as a pan coating, and wash hands and utensils after handling it.
Troubleshooting
The mixture looks oily or separated. The shortening may have been too warm, or the mixture may need more mixing. Let it cool until the shortening firms slightly, then stir until uniform. If there is still obvious free oil, check that the ingredients were measured in equal volumes and that the flour was not omitted or under-measured.
The paste is too stiff to brush. The flour may be packed into the measuring cup, or the shortening may be cold. Let the bowl stand briefly at room temperature and mix again. Avoid adding a large splash of oil; that can make the coating runny and harder to apply evenly.
The baked cake sticks in a detailed pan. Check for missed grooves, a damp pan, or a thick patch of coating. Next time, brush the narrow details first and inspect the pan under good light. Also follow the cake recipe’s resting and cooling directions; a very hot cake can be fragile, while leaving some cakes in the pan too long can make them harder to release.
The cake has a pale or floury film. The coat was probably too thick, or the flour was measured heavily. Brush on a thinner layer and make sure it is spread edge to edge without visible clumps. Recheck flour measurement before mixing the next batch.
The mixture has hard bits. Shortening that was too cold can break into lumps, and flour can collect against the bowl. Let the mixture soften slightly, then press and stir the lumps against the side of the bowl until smooth. Scrape the bottom and sides as you mix.
The mixture smells stale or looks unusual. Discard it if it has an off odor, visible mold, or has been contaminated with water or crumbs. Make a fresh small batch rather than trying to correct a questionable mixture.
Variations
- Gluten-free cake release: Replace the all-purpose flour with the same volume of a gluten-free all-purpose baking blend. Use a blend designed as a direct baking substitute rather than a single-ingredient nut or starch flour.
- Dairy-free cake release: The standard recipe contains no butter or other dairy ingredient, but check the shortening label if avoiding dairy carefully. Melted coconut oil is an alternative to vegetable oil; it will firm up more in a cool room or refrigerator.
- Small batch: Mix 1/4 cup each of flour, oil, and shortening. This makes half the recipe and is useful if you only bake occasionally.
- Larger batch: For a larger amount, use 1 cup each of flour, oil, and shortening. Mix in a roomy bowl and scrape it thoroughly so no dry flour remains at the bottom.
- Different neutral oils: A mild vegetable oil can replace the listed oil in the same volume. Keep the flour and shortening unchanged so the texture stays close to the intended spreadable paste.
What to Serve With It
Cake release is a baking aid, not a dish to serve. Use it for cakes that are baked in a pan and then turned out, such as layer cakes, loaf cakes, and Bundt-style cakes. It is especially useful when a pan has corners, flutes, or a patterned surface that is awkward to reach with a piece of solid fat.
Once the cake is baked and cooled according to its recipe, serve it with whatever suits that cake: fresh fruit, whipped cream, a simple glaze, or no topping at all. The coating is designed to help the cake leave the pan; it is not intended to add flavor to the finished dessert.
Make-Ahead, Storage and Reheating
There is no USDA-specific storage period established for this homemade uncooked flour-and-fat mixture. For a cautious approach, make a small batch, keep it in a clean airtight container in the refrigerator, and use it within 3–4 days. This short window is a conservative household practice, not a validated shelf-life guarantee. Raw flour is not ready-to-eat, so do not leave the mixture out for serving or taste it.
The mixture firms in the refrigerator, especially if made with coconut oil. Let only the amount you need stand briefly until spreadable, then stir it until smooth before using. Do not warm the whole container repeatedly or let water get into it. Discard the batch if it develops an off smell, visible mold, or other unexpected changes.
For longer storage, freeze it in a tightly sealed, freezer-safe container in a portion you can use at once. Use within 3–4 months for best quality, thaw in the refrigerator, and stir thoroughly after thawing. Freezing is for storage, not a way to make the raw flour safe to eat. There is no reheating step for cake release; use it at a soft, brushable consistency and bake the cake according to its own recipe.
Recipe Card
Yield: About 1 1/2 cups, one batch
Prep time: 5 minutes
Cook time: None for the cake release
Total time: 5 minutes, plus time to coat the pan and bake the cake
Ingredients
- 1/2 cup all-purpose flour, spooned and leveled, or gluten-free all-purpose baking blend
- 1/2 cup vegetable oil, or melted and cooled coconut oil
- 1/2 cup softened vegetable shortening, or dairy-free shortening
Condensed steps
- Measure equal volumes of flour, oil, and softened shortening.
- Mix, scraping the bowl, until smooth and evenly combined.
- Transfer to a clean, dry, airtight container and label it.
- Brush a thin, continuous coat over every surface of a clean, dry cake pan.
- Add batter and bake at the temperature and for the time specified by the cake recipe. Cool and release the cake as that recipe directs.
Frequently Asked Questions
What is cake goop?
Cake goop is a homemade pan-release paste made by mixing flour, oil, and shortening in equal volumes. You brush it inside a cake pan before adding batter to help the baked cake release.
Can I use cake release instead of buttering and flouring a pan?
Yes. It combines a fat coating and flour barrier in one mixture. Apply it in a thin, even layer, and still follow the cake recipe’s pan-preparation and cooling instructions if they specify something different.
Can I use it on a Bundt pan?
Yes. A pastry brush makes it easier to cover the flutes and narrow details. Brush into the deepest grooves first, then coat the larger surfaces, checking for bare spots and excess paste.
Does cake release change the taste of cake?
It is intended to stay on the pan, not to flavor the cake. A thin coat should not add a noticeable flavor. A thick layer can leave a floury residue on the outside, so brush off excess before adding batter.
Can I make it without shortening?
Shortening is part of the equal-parts formula and gives the mixture its soft, clingy texture. Dairy-free shortening works in the same amount. Replacing it with butter or extra oil changes the mixture, so it is not a direct substitution.
Can I use melted coconut oil?
Yes. Use the same volume as the vegetable oil and let it cool until just warm and pourable before mixing. Coconut oil firms when cool, so the finished paste may need a little time at room temperature and a thorough stir before brushing.
How much cake release should I put in the pan?
Use enough to make a thin, continuous sheen across the inside of the pan. The exact amount depends on the pan’s size and details. Spread it with a brush rather than pouring it in, and remove visible puddles or clumps.
Can I use it for cupcakes or sheet cakes?
It can coat cake pans, but for cupcake tins or broad sheet pans, use the preparation method called for by the recipe and consider whether a brush can cover the surfaces evenly. It is most helpful where a cake must turn out of a pan, particularly from detailed shapes.
