
These homemade Mounds Bounty chocolate bars pair a sweet, chewy coconut center with a smooth semi-sweet chocolate coating. The filling uses sweetened shredded coconut, condensed milk, and vanilla; there is no complicated candy-making equipment or oven step required for the standard version.
Chilling the shaped centers before dipping makes them easier to handle, while a little coconut oil in the melted chocolate, if you choose to use it, helps the coating flow around each bar. Expect a soft, moist coconut middle and a firm chocolate shell, with sweetness balanced by the semi-sweet chocolate.
Why This Recipe Works
Sweetened condensed milk binds the coconut without needing to cook a syrup. It adds moisture and sweetness, while the shredded coconut gives the filling its chew. Mixing just until the coconut is evenly coated avoids compressing the mixture into a dense paste.
Chilling matters twice: first, it firms the shaped centers so they keep their form during dipping; then it helps the chocolate coating set. If the centers are very cold, the chocolate may set quickly as you work, so dip a few at a time and keep the rest chilled.
Semi-sweet chocolate chips keep the coating from tasting as sugary as the filling. A small amount of coconut oil is optional: it loosens melted chocolate for dipping, but the bars can be made without it. Since chocolate chips can thicken as they cool, gentle reheating and stirring are more useful than turning up the heat.
Ingredients
- 2 cups sweetened shredded coconut
- 1 cup sweetened condensed milk
- 1 teaspoon vanilla extract
- 12 ounces semi-sweet chocolate chips
- 1 tablespoon coconut oil, optional, for a smoother chocolate coating
Ingredient Notes
Sweetened shredded coconut: This is the structure and chew of the filling. Use shredded coconut rather than large coconut flakes, which can make narrow bars harder to shape and coat. If you have unsweetened shredded coconut, it can work, but the filling will be less sweet and may taste less like a classic candy bar. Avoid changing the coconut quantity without adjusting the condensed milk, since the balance determines whether the mixture holds together.
Sweetened condensed milk: It is thick, concentrated milk with sugar already added, and it binds the coconut. Do not substitute evaporated milk; it is thinner and unsweetened, so the filling will not set in the same way. If your condensed milk has been refrigerated and is especially stiff, stir it smooth before measuring.
Vanilla extract: A teaspoon rounds out the coconut flavor. Pure or imitation vanilla extract both work. If you do not have vanilla, you can leave it out rather than substitute a liquid that would loosen the filling.
Semi-sweet chocolate chips: These make a pleasantly sweet but not overly sugary shell. Chopped semi-sweet baking chocolate is a suitable substitute; chop it finely so it melts evenly. Milk chocolate will make the coating sweeter, while bittersweet chocolate will give it a more pronounced cocoa flavor.
Coconut oil: Optional coconut oil helps melted chocolate dip more smoothly and can make the finished shell a little less thick. Refined or unrefined coconut oil will work; unrefined oil may add a light coconut aroma. Do not add water or milk to thin the chocolate, because even a small amount can make melted chocolate seize.
Instructions
- Optional: toast the coconut. For a lightly toasted flavor, heat the oven to 325°F. Spread the 2 cups of coconut in an even layer on a rimmed baking sheet and bake for 5–7 minutes, stirring once at about 3 minutes. Look for a few pale-golden strands and a fragrant smell; sweetened coconut can darken quickly, so check it often. Cool it completely before mixing. Skip this step for the classic soft, sweet coconut flavor; the recipe does not otherwise need an oven.
- Mix the filling. Put the coconut in a medium bowl. Add the condensed milk and vanilla, then stir until there are no dry patches and the coconut is evenly coated. The mixture should be thick and sticky, not pourable. If a little condensed milk is pooled at the bottom, keep folding gently until it is absorbed; this helps the bars hold their shape.
- Chill the mixture. Cover the bowl and refrigerate for 20–30 minutes. It should feel firmer and less sticky when scooped. This short rest makes shaping neater; if the mixture still slumps badly, chill it for another 10–15 minutes rather than adding extra coconut immediately.
- Shape the bars. Line a baking sheet or large plate with parchment paper. Divide the mixture into 12 portions and press each into a compact bar about 2½ inches long and ¾ inch wide. Press firmly enough to remove loose gaps, but do not squash the coconut into a hard block. Aim for similar-sized bars so they chill and coat at about the same rate.
- Chill the shaped centers. Refrigerate the bars for at least 45 minutes, or until firm enough to lift without bending. For a faster option, freeze them for 20–25 minutes and check that they are firm but not frozen solid. Firm centers are easier to dip and less likely to shed coconut into the chocolate.
- Melt the chocolate. Put the chocolate chips and, if using, coconut oil in a dry microwave-safe bowl. Microwave at 50% power in 20-second intervals, stirring well after each one. Stop when only a few small lumps remain and stir until smooth; residual heat will finish melting them. Alternatively, place the bowl over a saucepan of gently simmering water, making sure the bowl does not touch the water, and stir until smooth. Keep all water and steam out of the chocolate, which can make it seize.
- Dip the bars. Working with a few chilled centers at a time, lower each bar into the chocolate with a fork. Turn to coat, lift it out, and tap the fork gently against the bowl so excess chocolate falls away. Slide the bar onto the parchment with a second fork or a small spatula. The coating should cover the sides and top; patch any bare spots with a little chocolate before it sets.
- Set the coating. Refrigerate the dipped bars for 20–30 minutes, until the chocolate looks set and feels firm to a light touch. If the chocolate in the bowl thickens while you work, warm it briefly at low power and stir; do not overheat it. Keep the finished bars chilled until serving so the centers stay firm and the coating is less likely to soften.
Tips for Success
- Measure the coconut by volume without packing it. Fill the cup loosely and level it. Pressing it down can add more coconut than intended and leave the filling crumbly.
- Shape with lightly damp hands. A little water on your fingertips can reduce sticking while you form the bars. Use only a light dampening; wet hands can leave the coconut mixture slick.
- Make the bars compact and even. Loose edges can break off when you dip, while very thick bars take longer to coat neatly. Press in stray coconut before chilling.
- Keep the dipping tools dry. Even a small drop of water can make melted chocolate grainy or stiff. Use a completely dry bowl, fork, and spatula.
- Work in batches. Leave most centers in the refrigerator and take out three or four at a time. They are easier to dip when firm, but they do not need to be frozen.
- Use a narrow, deep bowl for dipping. It gives the chocolate more depth around the bars and reduces the amount you need to tilt and spoon over each one.
- Save the leftover chocolate. If there is more melted chocolate than needed for dipping, spread it on parchment and let it set, or refrigerate it to use in another recipe. Do not pour it down the sink.
Troubleshooting
The filling is too sticky to shape. Chill it another 10–15 minutes and try again with lightly damp hands. If it remains loose after chilling, fold in a small amount of extra shredded coconut, about 1 tablespoon at a time. Adding too much at once can make the centers dry.
The coconut mixture crumbles or will not hold together. Check that you used sweetened condensed milk rather than evaporated milk, and that the coconut was measured loosely rather than packed. Fold in condensed milk 1 teaspoon at a time until the mixture holds when pressed, then chill before shaping.
The bars break during dipping. They may be too warm or loosely pressed. Chill the centers until firm, then handle them gently with a fork. If one cracks, press it back together and return it to the refrigerator before coating.
The chocolate is thick, grainy, or seized. Chocolate can overheat or seize if water gets into it. If it is merely thick from cooling, warm it briefly at low power and stir. If it has seized from moisture and become grainy, it may not recover into a smooth dipping coating; use fresh chocolate in a dry bowl.
The coating slides off or leaves bare patches. The centers may be damp from condensation, or the chocolate may be too hot and thin. Pat any moisture off the centers and let them sit briefly in the refrigerator, then dip again. Use chocolate that is fluid but not hot, and make sure the bar is fully covered before lifting it out.
The chocolate shell cracks after chilling. Very cold centers can make a thin coating contract quickly. This is usually a cosmetic issue. Let the bars sit in the refrigerator a little longer before serving, and next time dip centers that are firm but not frozen solid.
Variations
- Toasted coconut: Toast the coconut at 325°F for 5–7 minutes, stirring once and watching closely, then cool it completely before mixing. This gives the filling a deeper, nuttier flavor.
- Different chocolate: Use milk chocolate for a sweeter shell or bittersweet chocolate for a more cocoa-forward finish. The filling remains the same, so taste the chocolate choice with the coconut before coating the whole batch.
- Chocolate drizzle: Instead of fully dipping, spoon a thin layer of chocolate over the tops of the chilled bars. This uses less chocolate and leaves more of the coconut visible.
- Smaller bites: Divide the filling into 24 portions and shape into compact nuggets. Chill and dip as directed, checking each one for complete coverage.
- Flavored coating: Add a small pinch of flaky salt to the chocolate coating or sprinkle it on the bars immediately after dipping, before the chocolate sets. A little is enough to contrast with the sweet filling.
What to Serve With It
These bars are rich enough to serve on their own as a small dessert or an afternoon sweet. Coffee or unsweetened tea provides a useful contrast to the sweet coconut center. For a dessert plate, serve one bar with fresh berries or slices of tart apple; the fruit adds freshness without requiring another rich component.
For a party tray, arrange the bars in paper candy cups and keep them cool until serving. If you are serving other sweets, cut the bars in half crosswise so guests can sample a smaller piece. Set out a small plate for crumbs, since the coconut filling can shed a few strands when bitten.
Make-Ahead, Storage and Reheating
You can make the coconut mixture and shape the bars a day ahead. Cover and refrigerate the uncoated centers, then dip them when you are ready. The finished bars can also be made ahead; let the chocolate set fully before storing so the coatings do not stick together.
Because the filling contains dairy and the bars are handled during preparation, store them in an airtight container in the refrigerator at 40°F or below. For a conservative leftover window, use them within 3–4 days. Do not leave them at room temperature for more than 2 hours, or more than 1 hour if the room is above 90°F. In a warm room, serve only what you expect to eat and keep the rest refrigerated.
For longer storage, freeze the bars in a single layer until firm, then transfer them to an airtight freezer container with parchment between layers. They keep their best texture for about 2 months; frozen food kept continuously at 0°F remains safe longer, though quality can decline. Thaw in the refrigerator, still covered, to limit condensation on the chocolate. The bars do not need reheating and are best served cool or after a few minutes out of the refrigerator.
Recipe Card
Servings: 12 bars
Prep time: 25 minutes
Cook time: 0 minutes for the standard no-bake recipe
Chilling and setting time: about 1 hour 35 minutes
Total time: about 2 hours, including chilling and setting
Ingredients
- 2 cups sweetened shredded coconut
- 1 cup sweetened condensed milk
- 1 teaspoon vanilla extract
- 12 ounces semi-sweet chocolate chips
- 1 tablespoon coconut oil, optional
Condensed Steps
- Stir coconut, condensed milk, and vanilla until evenly combined; chill for 20–30 minutes.
- Shape into 12 compact bars and chill for at least 45 minutes, until firm.
- Melt chocolate chips with optional coconut oil in short, gentle intervals, stirring until smooth.
- Dip each chilled bar, let excess chocolate drip off, and place on parchment.
- Refrigerate for 20–30 minutes until the coating is set. Store covered in the refrigerator.
Frequently Asked Questions
Do I need to bake these chocolate bars?
No. The standard recipe is no-bake; chilling firms the coconut centers and sets the chocolate. Toasting the coconut in a 325°F oven for 5–7 minutes is an optional flavor variation, not a required step.
Can I use unsweetened coconut?
Yes, but the centers will be less sweet and may taste less like a classic coconut candy bar. Keep the other amounts the same for the first batch, and make sure the mixture holds together before shaping.
Can I use evaporated milk instead of condensed milk?
No. Evaporated milk is thinner and does not contain the same added sugar, so it will not bind the filling in the same way. Use sweetened condensed milk for this recipe.
Why does the filling need to chill before I shape it?
The brief chill firms the condensed milk and makes the sticky coconut easier to portion. Chilling again after shaping is important because firm centers are less likely to bend or break during dipping.
Is coconut oil necessary for melting the chocolate?
No. It is optional and helps the chocolate flow more easily around the bars. Without it, the coating may be thicker, but you can still dip the centers; use gentle heat and stir often.
Can I make these without a microwave?
Yes. Set a dry heatproof bowl over a saucepan of gently simmering water, keeping the bowl above the water rather than in it. Stir the chocolate and optional coconut oil until smooth, then remove the bowl from the heat.
Can I freeze the finished bars?
Yes. Freeze them in an airtight container, separating layers with parchment. For the best texture, use them within about 2 months and thaw them covered in the refrigerator.
How do I keep the chocolate coating smooth?
Use dry equipment, melt the chocolate gently, and stir between heating intervals. If it thickens while you dip, warm it briefly and stir again. Keep water and steam away from the bowl.