Concealer is the workhorse of any makeup routine. It hides dark circles, blemishes, redness, and uneven patches, giving your skin a smooth, even canvas. Unlike foundation, which covers your whole face, concealer is used strategically on specific spots. This guide walks you through choosing the right formula, prepping your skin, and applying concealer so it looks natural and lasts all day. Before you start, make sure your face is clean and moisturized. If you wear foundation, apply it before concealer for most looks.
What You’ll Need
- Concealer (liquid, cream, or stick – see Step 1 for choosing)
- Makeup sponge (like a beauty blender) or a small, flat concealer brush
- Your fingers (clean, of course – they work fine for cream formulas)
- Setting powder (translucent or matching your skin tone)
- A fluffy powder brush or a small puff
- Moisturizer and eye cream (already applied)
- Optional: color corrector (peach or green) for stubborn dark circles or redness
Step-by-Step
- Choose the right formula and shade. For under-eye circles, use a liquid concealer that is one to two shades lighter than your foundation. For blemishes, match your concealer exactly to your foundation or skin tone. For dry skin, pick a hydrating, creamy formula. For oily skin, choose a matte, long-wear liquid or a stick concealer.
- Prep your skin. Apply your usual moisturizer and eye cream. Wait a couple of minutes for them to sink in. If your under-eye area is very dry, use a hydrating eye cream and let it absorb fully. This prevents concealer from looking cakey or settling into fine lines.
- Apply foundation first (optional). If you wear foundation, put it on before concealer. This way, you only need concealer for what the foundation didn’t cover, which keeps your makeup light and natural.
- Dot concealer on the areas you want to cover. Use the applicator wand to place three small dots under each eye, forming a triangle shape with the point toward your cheek. For blemishes, dot directly on the spot. For redness around the nose, dot along the sides.
- Blend with a damp sponge or brush. Use a damp makeup sponge to gently pat and press the concealer into your skin. Do not rub or swipe – patting gives the most coverage and prevents streaks. For under-eye concealer, blend in a gentle, outward motion toward your temples. For blemishes, use the tip of the sponge or a small brush to blend the edges only, leaving the center covered.
- Build coverage in thin layers. If you still see darkness or a spot, wait a few seconds for the first layer to dry, then add another thin dot and blend again. Thin layers look natural and last longer than one thick layer.
- Set with powder. Using a fluffy brush or a puff, dust a light layer of translucent powder over the concealed areas. This locks the concealer in place and prevents it from creasing or sliding off. Press the powder gently into the skin rather than sweeping it, especially under the eyes.
- Check in natural light. Step near a window and look in a mirror. Natural light shows any streaks, mismatched shades, or heavy spots. Fix any issues by blending a little more or dusting off excess powder.
Common Mistakes
- Using too much product. A pea-sized amount is plenty for both under-eyes. More product means more creasing and a cakey finish.
- Applying concealer before moisturizer has dried. This makes the concealer slide around and look patchy.
- Choosing the wrong shade. Too light under the eyes looks like reverse raccoon eyes. Too dark looks like a bruise. Always test on your jawline or under-eye area in natural light.
- Rubbing instead of patting. Rubbing moves the product and your skin, which emphasizes texture and fine lines.
- Skipping powder. Without powder, liquid concealer will crease within a couple of hours, especially under the eyes.
- Using a dry sponge. A dry sponge soaks up too much product and applies it unevenly. Always dampen it and squeeze out the excess water.
Tips
- Color correct first for stubborn dark circles. If your under-eyes are very dark or purple-toned, dab a tiny bit of peach or orange color corrector before your regular concealer. For red blemishes, a green corrector neutralizes the redness.
- Warm up cream concealer on your finger. The heat from your finger makes the product more spreadable and blends more seamlessly.
- Use a tiny brush for precision. For small blemishes, a thin, flat brush gives you more control than a sponge.
- Set with a damp puff for a natural finish. Dip a damp puff into powder, then press it over the concealed area. This sets the makeup without making it look flat or powdery.
- Carry a mini concealer for touch-ups. By midday, you may need to re-apply a tiny bit under the eyes or on a spot. A small tube in your bag makes this easy.
- Match concealer to your neck, not your face. Your face is often a bit lighter than your neck. Matching to your neck avoids a visible line.
Troubleshooting
- Concealer is creasing under the eyes. This happens when you use too much product or skip powder. Gently pat the crease with your fingertip to smooth it out, then dust a little powder over the area. For a long-term fix, use less product and always set with powder.
- Concealer looks cakey or thick. You likely used too much or didn’t moisturize enough. Use a damp sponge to press and blend the area again. If it still looks heavy, gently wipe off the excess with a cotton swab and apply a thinner layer.
- The shade looks too light or too dark. If it’s too light, blend a tiny bit of your foundation over it to deepen it. If it’s too dark, blend a tiny bit of lighter foundation or a highlighter over it. In the future, test shades in natural light before buying.
- Concealer fades or wears off by midday. Set it with powder and consider using a makeup setting spray after your whole face is done. Also, avoid touching your face during the day.
- Concealer emphasizes dry patches. Stop applying more product. Gently remove the area with a damp cloth, apply a bit of moisturizer, wait for it to dry, then re-apply a very thin layer of a hydrating concealer formula.
- The concealer looks gray or ashy. This usually means the shade is too light or has a cool undertone. Warm up the shade by mixing in a drop of liquid foundation or a peach color corrector.
Frequently Asked Questions
- Should I apply concealer before or after foundation? Generally, after foundation. Foundation evens out your overall skin tone, so you can see exactly what still needs extra coverage. The exception is if you use a color corrector – that goes on before foundation.
- Can I use concealer instead of foundation? Yes, for a natural, minimal look. Apply a few dots on your under-eyes, any blemishes, and areas of redness, then blend well. This is called spot concealing and works best if your skin is already fairly even.
- How do I stop concealer from settling into fine lines? Use a hydrating eye cream first, apply a thin layer of concealer, and set it with a small amount of powder. Avoid putting concealer all the way into the inner corner of your eye, where lines are deepest.
- What’s the difference between concealer and color corrector? Concealer matches your skin tone and provides coverage. Color corrector is tinted (peach, green, lavender) and neutralizes specific discolorations before you apply concealer. You use both when you have stubborn dark circles or redness.
- Can I use my fingers to apply concealer? Absolutely. Fingers are great for cream and stick formulas because the warmth helps them blend. Just make sure your hands are clean. For liquid concealer, a damp sponge often gives a smoother finish.
- How long does concealer last on the skin? It depends on the formula, your skin type, and the weather. Most liquid concealers last several hours before needing a touch-up. Setting with powder and using a setting spray can extend wear significantly.
How to Apply Concealer: A Complete Guide