Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

Wildlife Garden Part Ten: Adding Water Features

This tenth installment focuses on adding a water feature, the single most effective way to boost wildlife visits to your garden. A pond, even a small one, provides drinking water, breeding habitat for amphibians and insects, and attracts birds and mammals you might not otherwise see. Before you start, check local regulations about digging and water use, and confirm that your chosen spot has a mix of sun and shade—most aquatic life prefers a few hours of direct sun but not all-day scorching heat.

What You’ll Need

  • Flexible pond liner (EPDM rubber or butyl) or a pre-formed rigid pond shell
  • Sharp spade and shovel for digging
  • Level (spirit level) and a straight board
  • Sand or old carpet to cushion the liner
  • Rocks or paving slabs to anchor the edges
  • Native aquatic plants: submerged oxygenators, floating plants, and marginal plants
  • Gravel or pebbles for the bottom (optional but helpful)
  • A bucket or hose for filling
  • Old bricks or logs to create a ramp for wildlife to escape

Step-by-Step

  1. Choose the location. Pick a spot that gets a few hours of sunlight daily, is away from overhanging trees (to reduce leaf litter), and is visible from a window so you can enjoy the visitors. Avoid areas where runoff from paths or lawns might carry chemicals into the water.
  2. Mark out the shape. Use a garden hose or rope to outline an irregular, kidney-shaped or oval pond—straight lines look unnatural and are less wildlife-friendly. Aim for a size that fits your space; even a small container pond works if you have no room for a full one.
  3. Dig the hole. Remove the turf and dig down to your desired depth. For a wildlife pond, create at least one deep area (about the depth of a spade’s blade) and a gently sloping shallow edge that allows animals to climb in and out. Keep the excavated soil nearby to build up a slight mound on one side—this helps create a naturalistic edge and provides a dry spot for basking.
  4. Create shelves. Dig a couple of flat ledges at different depths (for example, one near the surface for marginal plants and another deeper for submerged plants). These shelves make it easier to place pots and give wildlife different water depths to choose from.
  5. Prepare the base. Remove any sharp stones from the hole, then line the entire excavation with a layer of sand or old carpet. This cushions the liner and prevents punctures from roots or rocks.
  6. Lay the liner. Drape the liner loosely over the hole, allowing plenty of slack—do not stretch it tight. Press it gently into the contours, starting from the bottom and working outward. Use a few bricks or stones to hold it in place on the edges.
  7. Add water gradually. Begin filling with a hose, letting the weight of the water push the liner into the shape. As the water rises, adjust the liner to eliminate wrinkles and ensure it sits snugly against the sides. Do not fill to the very top; leave a few inches of liner exposed at the edges.
  8. Trim and anchor the edges. Once full, trim the excess liner, leaving a flap that can be hidden under rocks, turf, or paving slabs. Use heavy stones or slabs to secure the liner edge and create a natural-looking rim. Ensure the water level is just below the liner edge so animals can climb out easily.
  9. Add plants. Place potted marginal plants on the shallow shelves (e.g., marsh marigold, water mint). Submerge oxygenator plants (like hornwort) in the deeper water, and add floating plants (such as frogbit) on the surface. Aim for a mix of about half the water surface covered by plants to provide shelter and shade.
  10. Create an escape ramp. Place a log, a pile of stones, or a sloping piece of wood from the water up to the edge. This is essential for hedgehogs, birds, or small mammals that fall in and need a way out. Check it regularly to ensure it remains in place.
  11. Wait for wildlife. Be patient. It can take several weeks or even months for insects, amphibians, and birds to discover the pond. Do not introduce fish—they will eat the eggs and larvae of frogs, newts, and dragonflies, which defeats the purpose of a wildlife pond.

Common Mistakes

  • Making the pond too deep with no shallow areas. Wildlife needs a gentle slope to drink safely and for creatures to climb out. A sheer-sided pond is a death trap.
  • Using tap water directly from the hose without letting it stand. Chlorine and chloramine can harm aquatic life. Let the water sit for a few days before adding plants or waiting for visitors, or use rainwater if possible.
  • Adding fish. Goldfish and koi devour amphibian eggs and insect larvae. A wildlife pond should be fish-free.
  • Placing the pond under a tree. Falling leaves decompose and create excess nutrients, leading to algae blooms and murky water.
  • Forgetting the escape ramp. Without a ramp, small animals that fall in will drown. Always include a log or stones.

Tips

  • Use native plants only—they support local insects and animals far better than exotic varieties.
  • Add a small solar-powered pump or fountain if you want moving water, but keep it gentle; strong currents stress aquatic life.
  • Leave the pond undisturbed during breeding season. Avoid cleaning or trimming plants in spring and early summer.
  • Create a bog garden adjacent to the pond by lining a shallow area with the same liner and filling with soil—this attracts even more species.
  • Place a few flat stones near the edge for basking insects and birds.

Troubleshooting

Green water (algae bloom): This is normal in a new pond. It usually clears within a few weeks as plants establish. Do not empty and refill—that removes beneficial bacteria. Add more oxygenating plants and ensure no excess nutrients from lawn fertilizer are running in.

Leaking liner: If the water level drops noticeably, find the leak by checking the liner for punctures. Patch with a repair kit designed for your liner type. Sometimes the leak is at the edge where the liner folds—adjust the stones to seal it.

Mosquitoes breeding: A healthy wildlife pond will have predators like dragonfly larvae and backswimmers that control mosquitoes. If mosquitoes are a problem, add a small pump to create water movement, or introduce a few native fish (like sticklebacks) only if you accept the trade-off with amphibians.

Murky water from soil: If you used a liner, this is unlikely, but if you have a natural clay pond, it may stay cloudy. Let it settle—do not add chemicals. Over time, plants will help clarify the water.

No wildlife coming: Be patient. It can take a full season for creatures to find the pond. Ensure there are nearby plants for cover and perches for birds. Sometimes adding a shallow dish of water in a sunny spot helps attract birds first.

Frequently Asked Questions

Q: How big should a wildlife pond be?
A: Any size works, but a pond roughly the size of a bathtub or larger is more stable and supports more species. Even a small container pond can attract frogs and insects.

Q: Do I really need to avoid fish?
A: Yes, for a true wildlife pond. Fish eat eggs and larvae, drastically reducing amphibian and insect populations. If you want fish, keep them in a separate ornamental pond.

Q: How do I keep the water clean without a filter?
A: A natural balance of plants (oxygenators, floating, and marginal) and a healthy population of microorganisms will keep the water clear. Avoid overfeeding and prevent leaf build-up.

Q: Can I use tap water?
A: Yes, but let it stand for a few days to allow chlorine to dissipate. Better yet, collect rainwater in a butt and use that to fill the pond.

Q: What should I do in winter?
A: Leave the pond alone. Do not break ice by chopping—that can harm hibernating creatures. If you have a ball float, you can place it on the surface to keep a small hole open, but it’s not essential.

Q: How do I stop herons from eating my frogs?
A: Herons are a natural part of the ecosystem. Provide plenty of hiding places: dense plants, a log pile, and a deep area. You can also place a net over the pond at night, but remove it during the day to avoid trapping birds.

Wildlife Garden Part Ten: Adding Water Features
Scroll to top