Red ants in your lawn can turn a pleasant backyard into a minefield of painful stings and unsightly mounds. This guide walks you through a practical, step-by-step approach to eliminate these pests and keep them from coming back. You’ll learn to identify the ants, choose the right treatment, and apply it safely—whether you prefer natural remedies or chemical baits. Before you start, make sure you have the items below and a bit of patience, as most treatments take a few weeks to fully work.
What You’ll Need
- Boiling water (for immediate, small-scale control)
- Dish soap and vegetable oil (for a DIY spray)
- Borax (sodium tetraborate) and sugar
- Commercial ant bait (gel, granules, or stakes)
- Insecticide dust or granules labeled for fire ants or red ants
- Garden sprayer or watering can
- Protective gloves and long sleeves
- A shovel or trowel (for mound treatment)
Step-by-Step
- Identify the ants. Red ants in lawns are often fire ants (Solenopsis invicta) or red imported fire ants. They build large, dome-shaped mounds and sting aggressively when disturbed. If you’re unsure, observe the ants: fire ants are reddish-brown and about 1/8 inch long. If the ants are small and black, they’re likely a different species, and the treatment may differ.
- Choose your treatment method. For a small number of mounds, you can use a direct approach like boiling water or a DIY spray. For a widespread infestation, use baits or granular insecticides. Baits are often more effective because they kill the entire colony, including the queen.
- Apply boiling water (for small mounds). Carefully pour a large pot of boiling water directly onto the mound. This kills ants on contact and can destroy the colony if the queen is near the surface. However, it may not reach deep nests, and the ants may rebuild. Repeat as needed.
- Make a DIY spray. Mix a few drops of dish soap with a cup of vegetable oil and a quart of water. Shake well and spray directly onto the mound and the ants. The soap breaks down the ants’ exoskeletons, and the oil suffocates them. This works best on contact but won’t eliminate the colony.
- Use a borax bait. Combine equal parts borax and sugar, then add enough warm water to make a thick paste. Place the bait in shallow lids near the mound. The sugar attracts the ants, and the borax poisons them. Worker ants carry the bait back to the colony, killing the queen and larvae. Reapply after rain or if the bait dries out.
- Apply commercial bait. Follow the label instructions on the product. Most baits come in granular form that you sprinkle around the mound, or as stakes that you push into the ground. Apply in the evening when ants are foraging. Avoid disturbing the mound after application, as this can cause the ants to move.
- Use insecticide dust for large mounds. If you have many mounds or the infestation is severe, use a dust insecticide specifically labeled for fire ants. Sprinkle the dust over the top of the mound and lightly water it in. The dust will be carried into the colony by the ants. Always wear gloves and a mask when applying.
- Wait and reapply. Most treatments take a few days to a couple of weeks to show full results. Monitor the mounds and reapply as needed, especially after rain. If you see new mounds forming, treat them immediately.
- Prevent future infestations. Keep your lawn healthy by mowing regularly, watering deeply but infrequently, and removing debris. Ants are attracted to food sources, so clean up spills and pet food. Seal cracks in sidewalks and foundations to reduce entry points.
Common Mistakes
- Disturbing the mound before treatment. Ants will relocate if their mound is disturbed, making them harder to treat. Always apply treatment without kicking or poking the mound.
- Using the wrong bait. Some baits are protein-based, others are sugar-based. Fire ants prefer sweets in spring and proteins in summer. If the bait isn’t being taken, switch to a different formulation.
- Applying bait during rain. Rain washes away the bait, reducing its effectiveness. Check the weather forecast and apply when dry for at least a day.
- Overwatering after treatment. Excessive water can dilute or wash away insecticides. Follow the label instructions for watering after application.
- Ignoring the queen. If you only kill worker ants, the colony will survive. Baits are effective because they target the queen. Direct sprays may not reach her.
Tips
- Treat in the evening. Ants are most active at dusk, so applying bait then increases the chance they’ll pick it up.
- Use a broadcast treatment for large lawns. If you have many mounds, consider a granular insecticide that you spread over the entire lawn with a spreader. This is more efficient than treating each mound individually.
- Combine methods. For stubborn infestations, use a bait for the colony and a contact spray for the mound surface. This gives immediate relief and long-term control.
- Keep children and pets away. Many insecticides are toxic. Keep kids and pets off the lawn until the product has dried or as directed on the label.
- Reapply after rain. Rain can wash away treatments, so reapply after heavy downpours.
Troubleshooting
The ants keep coming back. This usually means the queen survived. Use a bait that contains a slow-acting poison like borax or a commercial product with a delayed effect. Reapply as directed, and be patient—it can take several weeks to eliminate a colony.
The bait isn’t being taken. Try a different bait type (sugar vs. protein) or place it in multiple locations. Ants may be feeding on other food sources, so remove any competing food like fallen fruit or pet food.
The mound is still active after treatment. Check the mound a few days after treatment. If ants are still present, reapply. If you used a contact spray, it may have only killed the ants on the surface. Use a bait to target the colony.
Ants have moved to a new location. If you disturbed the mound, ants may relocate. Treat the new mound immediately. To prevent this, avoid disturbing mounds before treatment.
Frequently Asked Questions
Are red ants and fire ants the same?
Not always. Red ants can refer to several species, but in lawns, they are most often red imported fire ants. Fire ants are reddish-brown and build large mounds. Other red ants, like the European red ant, are less aggressive but can still be a nuisance.
Will boiling water kill the entire colony?
Boiling water can kill ants on contact and may destroy the colony if the queen is near the surface. However, it often doesn’t reach the deep nest, so ants may rebuild. It’s best for small, isolated mounds.
How long does it take to get rid of red ants?
It depends on the method. Contact sprays kill immediately, but the colony may survive. Baits can take a few days to a couple of weeks to fully eliminate the colony, as the poison spreads through the ants.
Are chemical treatments safe for my pets?
Most commercial ant killers are toxic to pets if ingested. Always follow label instructions, keep pets off the treated area until dry, and consider pet-safe alternatives like diatomaceous earth or borax (used carefully).
Can I prevent red ants from returning?
Yes. Keep your lawn healthy, remove food sources, and seal entry points. Regularly inspect your lawn for new mounds and treat them early. Some granular insecticides provide a barrier that lasts for months.
What if I have a large infestation?
For severe infestations, consider hiring a professional pest control service. They have access to stronger treatments and can apply them safely. Alternatively, use a broadcast granular insecticide over your entire lawn.