This guide shows you how to craft a classic mountain man fox hat, a distinctive piece of frontier-style headwear that keeps your head and ears warm while adding a rugged, historical touch to your winter gear. The hat features the fox’s face on top of your head, with the tail hanging down the back. You can make it from a real fox pelt (if ethically sourced and legal in your area) or a high-quality faux fur fabric. The process involves measuring your head, cutting the fur and lining, sewing them together, and attaching the tail. No prior sewing experience is required, but basic hand-sewing skills will help. We’ll cover both real fur and faux fur methods, with tips for handling each material.
What You’ll Need
- One fox pelt (real or faux fur) with the tail attached, or a separate faux fur piece and a faux fur tail
- Fabric lining (fleece or cotton flannel, about half a yard)
- Measuring tape
- Fabric scissors (sharp, for cutting fur)
- Sewing needle and strong thread (or a sewing machine with a heavy-duty needle)
- Pins
- Marking chalk or a fabric pen
- Cardboard or paper for pattern making
- Optional: leather needle, thimble, and a seam ripper
Step-by-Step
- Prepare your pattern. Measure the circumference of your head just above your ears and eyebrows. Divide that number in half. On cardboard, draw a dome shape: the base width should be half your head circumference, and the height from base to top should be about the distance from your eyebrows to the crown of your head, plus a little extra for seam allowance. This will be the main body of the hat. Cut out the pattern.
- Cut the fur pieces. Lay your fur flat with the fur side down. Place the pattern on the back (leather or fabric side) and trace around it with chalk. Cut out two identical pieces using sharp scissors. Important: cut only through the backing, not the fur hairs. If using a real pelt, the fur will be on the leather; if faux, it’s on fabric. Use a fresh blade and cut from the back to avoid snipping the fur.
- Cut the lining pieces. Using the same pattern, cut two pieces from your lining fabric. These will be the inside of the hat.
- Sew the fur pieces together. Place the two fur pieces with the fur sides facing each other (right sides together). Pin along the curved edges. Using a strong thread and a sturdy needle (or a sewing machine with a heavy-duty needle), sew a seam about half an inch from the edge, starting at the bottom front and going up over the top and down to the bottom back. Leave the bottom edge open. If using real leather, use a leather needle and a slightly longer stitch. Remove pins as you sew.
- Sew the lining pieces together. Repeat the same process with the lining pieces: place right sides together, pin, and sew along the curved edges, leaving the bottom open. Do not turn the lining right side out yet.
- Attach the tail. If using a real pelt, the tail is already attached. If using faux fur, you’ll need to sew the tail to the back seam. Position the tail at the center back of the hat, about an inch above the bottom edge. With the hat inside out (fur side in), place the tail’s base inside the hat, with the tail pointing outward. Sew the tail securely to the seam allowance using a few strong stitches. For a real pelt, you may need to reinforce the attachment point.
- Join the lining to the fur. Turn the fur hat right side out. Place the lining over the fur hat, with the lining’s right side facing the fur’s right side (so they are inside out together). The lining will be on the outside. Align the bottom edges and the back seams. Pin the bottom edges together all around.
- Sew the bottom edge. Sew around the bottom edge, leaving a gap of about three inches open for turning. Use a sturdy stitch. Be careful not to catch the fur in the seam.
- Turn the hat right side out. Reach through the gap and pull the entire hat through so the fur is on the outside and the lining is inside. Gently push out the seams.
- Close the gap and finish. Hand-stitch the gap closed using a blind stitch or a simple whip stitch. Tuck the lining neatly inside the hat. If you want, you can add a chin strap by sewing a piece of leather or cord to the inside edges near the ears.
Common Mistakes
- Cutting the fur hairs. If you cut from the fur side, you’ll end up with patchy, short hairs. Always cut from the back.
- Making the hat too small. Forgetting to add seam allowance will result in a snug, uncomfortable hat. Always add at least half an inch.
- Using a regular sewing machine needle on leather. This can break the needle or damage the machine. Use a leather needle or hand-sew with a thimble.
- Not aligning the back seams. If the fur and lining seams don’t match, the hat will twist when worn. Pin them together carefully before sewing.
- Skipping the lining. A lining is essential for comfort and to prevent the fur from shedding on your forehead. Don’t skip it.
Tips
- For a more authentic look, use a real fox pelt. Ensure it’s legally sourced and tanned. Faux fur is a cruelty-free alternative and easier to sew.
- When sewing fur, use a longer stitch length (about three millimeters) to avoid puckering.
- To keep fur out of the seam, use a technique called “fur brushing”: after sewing, use a needle to gently pull out any trapped hairs.
- If your pelt has a natural hole or tear, patch it from the back with a piece of leather before sewing.
- Store the hat in a cool, dry place. For real fur, avoid crushing it; stuff it with tissue paper to maintain its shape.
Troubleshooting
- The hat is too tight. If you haven’t sewn the lining yet, you can add a gusset (a small triangular piece) to the sides. If it’s already sewn, you may need to unpick the lining seam and insert a fabric strip. Next time, measure more loosely.
- The fur sheds a lot. For faux fur, this is normal initially. Shake it outside to remove loose hairs. For real fur, shedding can indicate a poorly tanned pelt; you can apply a leather conditioner to the back to help secure the hairs.
- The tail is too heavy and pulls the hat. Reinforce the attachment with a few extra stitches, or add a small piece of leather as a patch on the inside. If the tail is very long, you can trim it slightly from the base (not the tip) and re-sew.
- The hat slides off. Add a chin strap or a drawstring at the back. You can also sew a small piece of elastic inside the back to grip your head.
- The seam is visible on the fur side. Use a seam ripper to carefully unpick the seam, then re-sew with a smaller seam allowance, or press the seam open with your fingers.
Frequently Asked Questions
- Can I use a raccoon or coyote pelt instead? Yes, the same pattern works for any small to medium fur animal. Just adjust the size based on the pelt’s dimensions.
- How do I clean a real fur hat? Do not machine wash. Spot clean with a damp cloth and mild soap, then air dry. For deep cleaning, take it to a professional furrier.
- Is it legal to own a real fox fur hat? Laws vary by region. In many places, it’s legal if the pelt was legally harvested and tanned. Check your local wildlife regulations before purchasing.
- How long does it take to make? For a beginner, it might take a few hours over a couple of days. With experience, you can finish one in an afternoon.
- Can I make it without a sewing machine? Absolutely. Hand-sewing works well, especially with a thimble. Use a backstitch for strong seams.
- What if my head is between sizes? It’s better to make it slightly larger and add a thin fleece band inside to adjust the fit, rather than making it too tight.