Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

Paper Mache Horse Head: Step-by-Step Guide

Making a paper mache horse head is a rewarding craft project that results in a lightweight, sculptural piece you can use as a wall decoration, a costume prop, or a centerpiece for a party. The process is messy but simple, and it uses everyday materials. Before you start, gather your supplies and protect your work surface with newspaper or a plastic tablecloth. This guide will walk you through building the armature, applying the paper mache, and finishing your horse head with paint and details.

What You’ll Need

  • Newspaper or scrap paper (for the armature and for tearing into strips)
  • Cardboard (cereal boxes or similar) for the ears and muzzle details
  • Masking tape or duct tape
  • Flour and water (for the paste) OR white glue and water
  • A large bowl for mixing paste
  • Scissors or a craft knife
  • Wire or a wire hanger (for the neck support, optional but recommended)
  • Acrylic paint and brushes
  • Clear sealant or varnish (optional, for durability)

Step-by-Step

  1. Create the base armature. Crumple newspaper into a tight ball for the skull. Shape it into an oval, about the size of a large melon. Tape it securely. For the muzzle, roll a smaller tube of newspaper and tape it to the front of the skull, angling it slightly downward. This forms the basic horse head silhouette.
  2. Add the neck. If you want a neck, roll a thick cone of newspaper and tape it to the bottom of the skull. For extra support, insert a wire hanger or a few lengths of wire into the neck and skull before taping. This will help the head stay upright if you plan to mount it.
  3. Shape the ears. Cut two ear shapes from cardboard – each about the size of your palm. Fold them slightly at the base so they stand up. Tape them onto the top of the skull, slightly apart and angled back.
  4. Refine the muzzle. Cut a small cardboard oval for the nostril area and tape it to the front of the muzzle tube. You can also add a cardboard strip for the lips. Use small crumpled paper balls to build up the cheekbones and the brow ridge, taping them in place.
  5. Mix the paste. In a bowl, mix one part flour with two parts water until it has the consistency of thick cream. Stir out lumps. If using glue, mix one part glue with one part water. Both work well; flour paste is cheaper, glue paste is smoother.
  6. Tear paper strips. Tear newspaper into strips about an inch wide and several inches long. Tearing, not cutting, gives softer edges that blend better.
  7. Apply the first layer. Dip a strip into the paste, run it between two fingers to remove excess, and lay it over the armature. Smooth it down with your fingers. Cover the entire head with one layer of strips, overlapping them slightly. Do not make it too thick or it will take days to dry.
  8. Build up to three or four layers. Let each layer dry slightly before adding the next. For a stronger finish, use four layers total. Make sure to cover all cardboard and tape completely. This is the structural strength of your piece.
  9. Add final details. While the last layer is still damp, you can add small rolled paper pieces for the nostrils or the mouth line. Press them in firmly. Let the entire head dry completely. This can take a couple of days depending on humidity. It should feel hard and light when dry.
  10. Sand and smooth. Once dry, use fine sandpaper to smooth any rough edges or bumps. Be gentle to avoid tearing the paper. You can also add a thin layer of paper mache paste over any cracks and let it dry again.
  11. Paint the base coat. Apply a coat of white or light gray acrylic paint as a primer. This covers the newspaper print and gives you a clean surface. Let it dry completely.
  12. Paint the horse. Use acrylic paints to add your chosen color – bay, black, chestnut, or even a fantasy color. Paint in thin layers, letting each dry. Add details like the eyes, nostrils, and mouth with a small brush. You can also paint a mane by adding sweeping strokes along the neck.
  13. Seal and finish. Once the paint is dry, apply a clear sealant or varnish to protect the surface. This is especially important if the piece will be handled or displayed outdoors. Let it dry thoroughly.

Common Mistakes

  • Using too much paste. Overly wet strips take forever to dry and can cause the paper to warp or tear. Always squeeze off excess paste.
  • Skipping the armature. If you just pile paper mache onto a balloon or a wad of paper, the shape will be lumpy and weak. Take time to build a solid base.
  • Not letting it dry completely. Adding layers on top of wet paper mache can trap moisture and lead to mold or a soft core. Wait until each layer is dry to the touch.
  • Using too few layers. One or two layers will be flimsy and dent easily. Aim for at least three or four layers for a sturdy piece.
  • Painting before it’s dry. Paint will peel if the paper mache is still damp. Be patient.

Tips

  • Work in a well-ventilated area and wear an apron or old clothes.
  • Use a hairdryer on a cool setting to speed up drying between layers, but don’t overheat it.
  • For a smoother finish, use plain white paper for the final layer instead of newspaper.
  • If you want a glossy look, mix a little glue into your final coat of paint.
  • Add a wire loop to the back before the final layers if you plan to hang it on a wall.
  • Use reference photos of horses to get the proportions right, especially the eye placement and muzzle shape.

Troubleshooting

  • The head is too heavy and sags. If the neck bends, you likely didn’t have enough support in the armature. Remove some paper mache from the neck, insert a wire or a wooden dowel, and reapply the layer. Let it dry with the head propped up.
  • Cracks appear after drying. This is normal if the layers were too thick or dried too fast. Fill the cracks with a small amount of fresh paste and paper strips, then let it dry and sand smooth.
  • The surface is bumpy. Sand it down with medium-grit sandpaper. If the bumps are large, you can add a thin layer of joint compound or spackle, let it dry, and sand it smooth.
  • It’s taking too long to dry. Move it to a warm, dry place with good air circulation. A fan can help. Do not put it in an oven or microwave.
  • The paint won’t stick. Make sure the surface is clean and dry. Apply a primer coat first. If the paper mache is too smooth, lightly sand it to give the paint something to grip.

Frequently Asked Questions

  1. How long does it take to dry? Depending on humidity and thickness, it can take anywhere from a day to several days. Each layer should dry before adding the next.
  2. Can I use a balloon as a base? Yes, but balloons are round, so you’ll need to build up the muzzle and ears with paper and tape. A crumpled newspaper armature gives you more control over the shape.
  3. What’s the best paste recipe? A simple flour and water paste works well. Mix one part flour with two parts water until smooth. Add a pinch of salt to prevent mold. White glue and water is another option that dries clearer.
  4. How do I make the ears stand up? Use cardboard for the ears and attach them firmly with tape before applying paper mache. The paper mache layers will hold them in place.
  5. Can I make it waterproof? Paper mache is not naturally waterproof. After painting, apply a clear acrylic sealant or varnish to protect it from moisture. Keep it out of heavy rain.
  6. What if I want it to be bigger? Scale up the armature using larger crumpled paper and more tape. You may need to add extra layers of paper mache for strength. Just remember it will take longer to dry.
Paper Mache Horse Head: Step-by-Step Guide
Scroll to top