After an election, neighborhoods are often dotted with campaign yard signs. Instead of tossing them in the trash, recycling them keeps plastic and wire out of landfills and gives the materials a second life. This guide walks you through the entire process, from checking what your local facility accepts to prepping the signs so they actually get recycled. Before you start, check your local municipal recycling rules, because the materials and accepted items vary widely from place to place.
What You’ll Need
- Pliers or a screwdriver (for removing staples or wire stakes)
- A utility knife or scissors (for cutting plastic or cardboard)
- A damp cloth or sponge (for cleaning dirt and grime)
- A hammer or mallet (to pull out metal stakes from the ground)
- A trash bag for non-recyclable bits like zip ties and clips
Step-by-Step
- Pull the signs and stakes out of the ground. Grasp the sign by its edges and pull upward. If the stake is stuck, use a hammer or mallet to tap it loose by hitting the side of the stake near the ground. Work gently to avoid snapping the sign or bending the stake.
- Separate the sign from the stake. Most yard signs are attached to wire stakes with small metal hooks or plastic clips. Use pliers to unbend the hooks or simply slide the sign off the stake. If the sign is stapled to a wooden stake, use the pliers or screwdriver to pry out the staples.
- Sort the materials. Look at the sign and its components. Common materials are corrugated plastic (polypropylene), corrugated cardboard, metal wire, and plastic clips. Separate these into different piles because they are recycled through different streams.
- Clean the signs. Wipe off dirt, mud, or grass clippings with a damp cloth. Food residue or heavy grime can contaminate a whole batch of recyclables, so make sure the signs are reasonably clean and dry.
- Check the recycling symbol. Many plastic signs have a number inside the chasing arrows triangle, often a 5 (polypropylene) or a 2 (high-density polyethylene). If there is no symbol, call your local recycling center to ask if they accept unmarked plastic sheeting.
- Cut or flatten large signs. If your recycling program requires items to fit inside a bin with the lid closed, cut large signs into smaller pieces with scissors or a utility knife. For cardboard signs, flatten them and remove any tape or sticky residue.
- Recycle the wire stakes. Metal stakes are usually steel and can go into your curbside metal recycling if your program accepts scrap metal. If not, take them to a scrap metal yard or a local recycling drop-off that takes metal. Straighten them with pliers so they are easy to handle.
- Recycle the plastic clips and zip ties. These small items are often too small to be recycled curbside. Collect them in a bag and check if a local craft store or a specialized recycling program accepts them. Otherwise, they go in the trash.
- Take the signs to the right facility. Curbside recycling is not always the best option for large rigid plastics. Search online for a local drop-off center that accepts polypropylene or rigid plastics. Some counties and cities run special election sign recycling events after major elections.
- Reuse what you can. Before recycling, consider reusing the signs. The corrugated plastic is great for garage sale signs, garden row markers, or as a backing for craft projects. The wire stakes are perfect for supporting tomato plants or other garden vegetables.
Common Mistakes
- Leaving staples or clips on the sign. These small metal or plastic pieces can jam recycling machinery or contaminate the plastic batch. Always remove them.
- Putting dirty signs in the bin. Mud and grass can ruin an entire load of recyclables. Clean and dry the signs first.
- Assuming all plastic is recyclable curbside. Many curbside programs do not accept large rigid plastics because they can get stuck in sorting equipment. Check with your local program first.
- Forgetting the wire stakes. Wire stakes are highly recyclable if taken to a scrap metal drop-off, but they are often thrown away. Make the extra effort to recycle them.
- Stacking signs in a pile on the curb. Loose signs blow away and become litter. Bundle them with twine or place them inside a cardboard box for pickup.
Tips
- Call ahead. Before you drive across town, call the recycling center to confirm they accept the specific plastic type and whether they have a limit on quantity.
- Check with your city or county. Many municipalities run a special collection for campaign signs in the weeks after an election. Look for announcements on their website or social media.
- Ask the campaign. Some campaigns collect their own signs after the election to reuse or recycle them. If you still have signs, you can contact the candidate’s office to see if they want them back.
- Use a permanent marker. If you plan to reuse the plastic signs for a different purpose, write on them with a dry-erase marker so you can wipe it off later.
- Don’t put plastic bags with the signs. Film plastic and bags are a different recycling stream and can contaminate rigid plastic recycling.
Troubleshooting
The sign is torn or shattered. If the plastic is cracked, cut out the damaged sections and recycle the intact parts. If it is in tiny pieces, it is too small to be recycled and should go in the trash.
Your local recycling center won’t take the plastic. Look for a commercial recycling company that handles polypropylene or high-density polyethylene. You can also search for a mail-in recycling program for rigid plastics, though you may need to pay for shipping.
The wire stake is bent beyond repair. Cut it into short lengths with bolt cutters so it fits in your recycling bin, or take it to a scrap metal yard. Do not put long bent wires in curbside bins as they can poke through the bags.
The sign is made of a material you can’t identify. If it is flexible and has a fabric-like feel, it may be a vinyl banner. Vinyl is not typically recyclable curbside. Check with a specialized vinyl recycling program or repurpose it as a drop cloth for painting.
Your curbside pickup day has passed. Store the cleaned signs in a dry place until the next pickup, or take them to a drop-off center on your own schedule. Do not leave them out for weeks, as they can become a nuisance.
Frequently Asked Questions
Can I put yard signs in my regular curbside recycling bin? It depends on your local program. Many curbside programs do not accept large rigid plastics because they jam sorting machines. Check with your waste hauler first. If they do accept them, make sure the signs are clean and cut to fit inside the bin.
Are the wire stakes recyclable? Yes, steel wire stakes are recyclable as scrap metal. You can take them to a scrap metal yard or a drop-off that accepts metal. Do not put them in your curbside bin unless your program specifically accepts scrap metal.
What if the sign has a metal frame instead of a wire stake? Remove the frame from the sign. The frame is recyclable as scrap metal. The sign itself is usually plastic or cardboard and can be recycled according to its material.
Can I recycle signs with tape or adhesive on them? You should remove as much tape and adhesive as possible. Sticky residue can contaminate the recycling stream. If the adhesive is stubborn, use a bit of cooking oil to loosen it, then wipe it clean.
What do the numbers inside the recycling triangle mean? The number identifies the plastic resin. A 5 usually means polypropylene, which is recyclable in many programs. A 2 is high-density polyethylene, also widely recyclable. If you see a 7 or no number, it is likely a mixed plastic that is harder to recycle.
Is it better to reuse the signs before recycling? Yes, reusing is always better than recycling. Corrugated plastic signs can serve as garden kneeling pads, paint shields, or sign boards for your own events. Wire stakes are perfect for supporting tall plants. Give them a second life before sending them off.