Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

Stop a Shower Curtain From Blowing In

Nothing ruins a relaxing shower like a curtain that billows inward, clinging to your legs or letting cold air sneak in. This guide walks you through the most effective ways to keep your shower curtain flat and in place, using items you likely already own. Before you start, identify your curtain type: a lightweight fabric curtain, a plastic or vinyl liner, or a heavier decorative curtain. The fix that works best depends on the material and your shower setup.

What You’ll Need

  • A few strong magnets (neodymium or ceramic, about the size of a coin)
  • Small binder clips or clothespins
  • Velcro strips with adhesive backing
  • Snap-on curtain weights or small fishing sinkers
  • An elastic cord or a shower curtain tension rod (if you don’t already have one)
  • Optional: a spray bottle with water and a towel for cleaning surfaces

Step-by-Step

  1. Check your current setup. First, look at how your curtain hangs. Is it on a fixed rod, a tension rod, or a curved rod? Does the curtain have a hem at the bottom? Feel the bottom edge—if it’s very light and flimsy, that’s the main reason it blows around.
  2. Weigh down the bottom edge. The simplest fix is adding weight. Clip two or three small binder clips along the bottom hem, spacing them evenly. Or, if you have snap-on curtain weights, attach them inside the hem. For a homemade option, wrap a few fishing sinkers in a small cloth and pin them inside the bottom fold. This adds just enough mass to resist airflow.
  3. Use magnets to anchor the sides. If your shower has metal sides (common in tubs with metal frames), attach a small magnet to each bottom corner of the curtain. Place one magnet on the inside of the curtain and another on the outside, so they grip each other through the fabric and stick to the tub wall. If the tub is not metal, you can glue a metal washer to the tub side (using strong waterproof adhesive) and use magnets on the curtain to connect to it.
  4. Add Velcro to the bottom corners. For a non-metal tub or shower, cut two strips of adhesive Velcro. Stick one side to the inside bottom corner of the curtain, and the other side to the corresponding spot on the tub wall. Press firmly and let the adhesive set for a few hours before using the shower. This creates a strong, invisible anchor.
  5. Install a second tension rod. If you have a shower curtain plus a liner, install a second tension rod about halfway up the wall, parallel to the main rod. Hang the liner on the inner rod and the decorative curtain on the outer rod. This creates an air gap that stops the billowing effect, because the liner blocks the airflow while the outer curtain stays still.
  6. Adjust the shower head direction. Often the blowing is caused by water spray hitting the curtain directly. Angle the shower head slightly toward the wall or downward, so the water doesn’t blast the curtain. You can also install a shower head with a more focused spray pattern.
  7. Use an elastic cord at the bottom. For a quick, temporary fix, tie a length of elastic cord to the bottom grommet of the curtain, stretch it across the tub, and hook it to the opposite side. This is especially useful when traveling or in rental bathrooms where you can’t modify anything.
  8. Replace a flimsy liner. If your liner is very thin and lightweight, consider replacing it with a heavier fabric liner or a vinyl liner with a weighted hem. Many liners come with small magnets sewn into the bottom already—check yours before buying new.
  9. Check the rod height. Make sure the curtain rod is level and not sagging in the middle. A sagging rod creates a gap at the bottom where air can enter. Tighten any loose brackets or replace a bent rod.
  10. Use a curved shower rod. A curved (or “crescent”) rod pushes the curtain outward at the middle, giving you more elbow room and reducing the pressure differential that causes blowing. This is a bigger change but very effective if other methods fail.

Common Mistakes

  • Using too few weights. One small clip in the center won’t do much. You need weight distributed along the entire bottom edge, especially at the corners where the curtain lifts first.
  • Placing magnets where they rust. Regular steel magnets will rust quickly in a wet bathroom. Use coated or stainless steel magnets, or cover them with a layer of clear nail polish or waterproof tape.
  • Sticking Velcro to a wet surface. Adhesive Velcro won’t stick if the tub or curtain is damp. Clean the area with rubbing alcohol, dry it completely, and press firmly for several seconds.
  • Ignoring the liner. If you only fix the decorative curtain but the liner is still blowing, the problem persists. Treat both layers the same way.
  • Forgetting to check the vent fan. A strong bathroom exhaust fan can create a draft that pulls the curtain inward. If your fan is on high, try a lower setting or crack the door slightly.

Tips

  • Combine methods. The most reliable solution is to use both weights at the bottom and magnets or Velcro at the corners. This covers all the places where air can get in.
  • Use a fabric curtain instead of vinyl. Fabric curtains are heavier and less prone to static cling, which is a common cause of vinyl curtains sticking to your body.
  • Keep the curtain closed when not in use. This lets it dry flat and prevents mildew, which can make the fabric stiff and more likely to blow.
  • Test before you commit. Try the binder clip method first—it takes seconds and costs nothing. If it works, you can then decide if you want a more permanent solution.
  • Clean the bottom hem regularly. Soap scum and hard water buildup add weight unevenly, which can cause the curtain to twist and let air in. Wipe the hem with a damp cloth every few weeks.

Troubleshooting

If the curtain still blows after adding weights: The weights may be too light or placed too high. Move them to the very bottom edge, and add more if needed. Also check that the curtain isn’t too long and bunching up on the tub floor—trim it if necessary.

If magnets won’t stick to your tub: Some tubs are fiberglass or acrylic, which are not magnetic. In that case, use Velcro instead, or install a small metal plate with strong adhesive. You can also try using a heavy-duty suction cup with a hook at the bottom corner and attach the curtain to it with a ring.

If Velcro keeps peeling off: The adhesive may not be strong enough for the humidity. Use a marine-grade or outdoor double-sided tape, or sew a small piece of hook-and-loop tape directly onto the curtain and glue the other side to the tub with a waterproof epoxy.

If the curtain blows only when the fan is on: That’s a ventilation issue. Reduce the fan speed, open a window slightly, or install a louvered vent that doesn’t create as much direct airflow.

If the curtain still lifts at the corners: The corners are the weakest point. Add a small weight (like a fishing sinker) inside each corner hem, or use a binder clip that grips both the curtain and the tub edge if your tub has a lip.

Frequently Asked Questions

Q: Will magnets damage my tub or curtain?
No, not if you use coated magnets or wrap them in a thin cloth. Avoid dragging them across the surface, which could scratch. Most shower curtains are unaffected by small magnets.

Q: How many weights do I need for a standard curtain?
Usually three to four is enough: one in each corner and one or two in the middle. If your curtain is very long or wide, add more at regular intervals.

Q: Can I use a towel to stop the blowing?
Yes, a rolled towel placed along the bottom edge of the tub can block the gap, but it will get soaked and needs to be dried after every shower. It’s a decent temporary fix but not ideal.

Q: Do curved shower rods actually work?
Yes, for many people. By curving outward, the rod reduces the pressure difference between the inside and outside of the shower, which is the main cause of billowing. It also gives you more space.

Q: Should I replace my curtain liner or just fix it?
If your liner is thin and has no weights, replacing it with a heavier one is often easier and more effective than trying to modify it. Look for a liner labeled “weighted hem” or “anti-billow.”

Q: Is there a way to fix this permanently without tools?
Yes, the binder clip and magnet methods require no tools and can be removed easily. For a permanent fix, Velcro or sewn-in weights are best, but those take a few minutes to set up.

Stop a Shower Curtain From Blowing In
Scroll to top