Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

How to Use Adding Machine Tape: A Practical Guide

Adding machine tape, also known as calculator roll or register tape, is a continuous strip of paper used in adding machines, cash registers, and some calculators. Beyond its original purpose, it’s a versatile tool for crafting, gift wrapping, note-taking, and even household organization. This guide will show you how to load and use it in a machine, plus creative ways to put it to work.

What You’ll Need

  • Adding machine tape roll (standard width fits most machines)
  • An adding machine, calculator with a printer, or cash register
  • Scissors (for cutting tape for crafts or notes)
  • Optional: pens, markers, tape, or glue for craft projects

Step-by-Step

  1. Check the roll direction. Look at the end of the tape; it should unroll from the bottom of the roll. Most machines require the paper to feed from underneath so the printed text faces you.
  2. Open the printer cover. Locate the compartment on top or front of the machine. Gently lift or slide the cover to reveal the paper holder and the print head area.
  3. Remove any old core or paper. If there’s an empty roll, take it out. If there’s a partial roll, you can leave it and replace when finished, or remove it to start fresh.
  4. Place the new roll. Slide the roll onto the spindle or into the holder, ensuring the paper unrolls from the bottom toward the print head. If the roll has a specific orientation (some have a notch), align it correctly.
  5. Feed the paper. Pull a few inches of tape out and insert the leading edge into the slot just below the print head. It should go under the roller and out through the exit slot at the top.
  6. Close the cover. Gently press the cover down until it clicks. Make sure the paper isn’t jammed.
  7. Test the feed. Turn on the machine and press the feed or advance button (often marked with an arrow). The tape should move through and emerge from the top. If it doesn’t, re-check the alignment.
  8. Use the machine normally. As you press keys and hit the total or print button, the machine will print on the tape. The tape will automatically advance with each entry.
  9. For crafts or notes: Cut a length of tape with scissors. Use it as a bookmark, a strip for a to-do list, or wrap it around a gift as a ribbon. You can also write on it with pens or markers.
  10. Store the roll. When not in use, keep the roll in a dry place to prevent curling or moisture damage. If the tape is exposed to humidity, it may jam.

Common Mistakes

  • Wrong paper direction: Placing the roll so the paper unrolls from the top instead of the bottom causes jams and blank prints.
  • Not threading under the roller: The paper must go under the rubber roller, not over it. Over-threading leads to paper not advancing.
  • Forcing the cover closed: If the cover doesn’t close easily, the paper is likely misaligned. Forcing it can damage the mechanism.
  • Using the wrong width: Some machines require a specific tape width. Using a wider or narrower roll can cause feeding issues.
  • Ignoring paper jams: If the tape tears or jams, don’t pull it forcefully. Open the cover and gently remove the jammed paper.

Tips

  • Keep a spare roll nearby so you never run out mid-calculation.
  • For crafts, use the blank side for drawing or writing. You can also use the printed side for a vintage look.
  • To make a quick list, tear off a strip and stick it to your fridge with a magnet.
  • Use tape to wrap small gifts—it adds a rustic charm and is eco-friendly.
  • If the tape curls, roll it backward against the curl to flatten it.
  • For a neat tear, use the serrated edge on the machine’s cover if available.

Troubleshooting

  • Paper not advancing: Turn off the machine, open the cover, and re-thread the paper ensuring it goes under the roller. Check that the roll isn’t stuck on the spindle.
  • Print is faint or blank: The ink ribbon may be exhausted. Replace the ribbon cartridge if your machine uses one. For thermal printers, the print head may need cleaning—use a soft cloth with a little rubbing alcohol.
  • Paper jams frequently: Check for torn pieces inside the mechanism. Remove them carefully. Also, ensure the paper path is clear of dust.
  • Machine makes a grinding noise: The paper may be misaligned or the roll may be too tight. Re-thread and ensure the roll spins freely.
  • Tape tears easily: The paper may be old or exposed to moisture. Replace with a fresh roll.

Frequently Asked Questions

  • Can I use adding machine tape in a cash register? Yes, if the width matches. Most cash registers use the same standard size, but check your manual.
  • Is adding machine tape the same as receipt paper? Not always. Thermal receipt paper is coated and prints via heat, while adding machine tape is plain paper and uses ink ribbon. They are not interchangeable unless the machine supports both.
  • Can I reuse the tape? The printed side is permanent, but you can use the blank back for notes or crafts. For calculations, it’s not reusable.
  • How do I store the tape to prevent curling? Keep it in a cool, dry place away from direct sunlight. Some people store rolls in a plastic bag to keep out moisture.
  • What can I do with the printed tape? You can use it for paper mache, as a bookmark, or as a scratch pad. Many crafters use it for journaling and scrapbooking.
  • Why does my tape have a wavy edge? This is normal due to the perforation. If it’s excessive, the roll may be too tight or the machine’s tension is off—adjust the paper guide.
How to Use Adding Machine Tape: A Practical Guide
Scroll to top