Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

Glass Watering Globes: How to Use Them

Glass watering globes (also called aqua globes or plant watering bulbs) are a simple, attractive way to keep potted plants hydrated when you’re busy or away. The globe fills with water, then slowly releases moisture into the soil through its long neck, so the plant gets a steady drink over several days. This guide walks you through choosing, filling, and placing a globe correctly, plus common pitfalls and fixes.

What You’ll Need

  • A clean glass watering globe (any size, but the neck should be long enough to stay buried in the soil)
  • A potted plant with well-draining soil (globes work best in pots with drainage holes)
  • A pitcher or faucet with a narrow spout for filling the globe (or just hold it under a tap)
  • A small towel or cloth for wiping spills
  • Optional: a funnel if your globe’s opening is narrow

Step-by-Step

  1. Check the soil moisture. Watering globes are for maintenance, not for soaking bone-dry soil. Press your finger about an inch into the soil. If it feels dry, give the plant a thorough watering first, then let it drain for a few minutes. If the soil is already moist, wait a day or two before using the globe.
  2. Fill the globe with water. Hold the globe upside down (neck up) and fill it with room-temperature water. Fill it almost to the top, leaving a small air gap. Use a funnel if needed to avoid spills. Do not fill it with hot or boiling water—glass can crack.
  3. Cover the opening with your thumb. Quickly place your thumb or palm over the opening, then invert the globe so the neck points down. This creates a vacuum that keeps water from pouring out all at once.
  4. Insert the neck into the soil. With your thumb still covering the opening, push the neck into the soil near the plant’s base, about halfway to the bottom of the pot. Angle it slightly toward the roots. Push it down until the neck is completely buried—at least a couple of inches deep. The bulb should sit upright and stable.
  5. Remove your thumb and let go. Once the neck is buried, take your thumb off the opening. Water will begin to seep into the soil slowly. The globe will release water as the soil dries, creating a gentle drip.
  6. Monitor the first few days. Check the globe after a day or two. You should see the water level drop slightly. If it drops too fast, the soil may be very dry or the neck may not be deep enough. If it doesn’t drop at all, the soil may be too wet or the neck is clogged.
  7. Refill as needed. When the globe is nearly empty, remove it, refill, and reinsert. Depending on plant size, pot size, and temperature, a globe may last anywhere from a few days to a couple of weeks.
  8. Clean periodically. Every few weeks, rinse the globe with warm water and a bottle brush to remove algae or mineral buildup.

Common Mistakes

  • Using a globe on a plant that needs dry soil. Succulents, cacti, and some herbs prefer to dry out completely between waterings. A globe keeps soil consistently moist, which can lead to root rot.
  • Inserting the neck too shallow. If the neck is barely in the soil, water will just pool on the surface or evaporate quickly. Bury it deep enough to reach the root zone.
  • Using a globe in a pot without drainage. Water has nowhere to go, and the soil stays waterlogged. Always use a pot with drainage holes.
  • Filling with hot water. Thermal shock can crack the glass. Use room-temperature water.
  • Leaving the globe in direct sunlight. Sunlight can heat the glass and water, encouraging algae growth and potentially stressing the plant. Place the globe in a spot with indirect light.

Tips

  • Test the globe in a pot with a saucer. Place a saucer under the pot to catch any excess water that might drip out.
  • Use the globe for vacation watering. For a week-long trip, fill several globes and place them around the plant’s root zone. Test the setup a few days before you leave to ensure the flow is steady.
  • Clean the globe before first use. Rinse with warm water and a drop of dish soap, then rinse thoroughly. This removes any manufacturing residue.
  • Match globe size to pot size. A small globe in a large pot won’t provide enough water; a large globe in a small pot may overwater. As a rule, the globe should hold roughly a day’s worth of water for that plant.
  • Use room-temperature, filtered water if your tap water is very hard. This reduces mineral deposits in the neck.

Troubleshooting

  • Water flows out too fast. The neck may be too shallow or the soil may be very dry and porous. Push the neck deeper, or lightly tamp the soil around the neck. If the soil is extremely dry, water the plant first and let it settle for a day.
  • Water doesn’t flow at all. The neck may be clogged with soil or mineral deposits. Remove the globe, rinse the neck with warm water, and use a toothpick to clear the opening. Also check that the soil isn’t waterlogged—if it’s already saturated, the globe won’t release water.
  • Air bubbles keep forming in the neck. This is normal—it means water is being drawn out. If the bubbles stop and water level stays high, the soil may be too wet or the neck is blocked.
  • The globe keeps tipping over. The neck may not be long enough for the pot size, or the soil is too loose. Use a longer-necked globe, or press the soil firmly around the neck.
  • Algae grows inside the globe. Empty the globe, clean with a bottle brush and a mild vinegar solution, rinse well, and refill. Keep the globe out of direct sunlight to prevent future growth.
  • The plant still looks thirsty. The globe may be too small for the plant’s needs. Supplement with regular watering, or use multiple globes for larger plants.

Frequently Asked Questions

  • How long does a watering globe last? It depends on the plant, pot size, and temperature. In a typical houseplant pot, a globe can last anywhere from a few days to a couple of weeks. Check the water level every few days.
  • Can I use a watering globe for outdoor plants? Yes, but be aware that wind and sun increase evaporation, so the globe will empty faster. Also, freezing temperatures can crack the glass, so remove globes in winter.
  • Do watering globes work for all plants? No. They are best for moisture-loving plants like ferns, peace lilies, and spider plants. Avoid using them for succulents, cacti, or plants that prefer dry soil.
  • How do I clean a watering globe? Rinse with warm water and use a bottle brush. For stubborn deposits, fill with a solution of equal parts water and white vinegar, let it sit for a few hours, then scrub and rinse.
  • Can I use a watering globe in a pot without drainage holes? It’s not recommended. Without drainage, water accumulates at the bottom, leading to root rot. If you must, use a globe with a very slow drip and monitor soil moisture closely.
  • Why does my globe stop releasing water after a few days? This usually happens when the soil becomes too wet, creating a waterlogged barrier that prevents the vacuum from working. Remove the globe, let the soil dry out slightly, then reinsert.
Glass Watering Globes: How to Use Them
Scroll to top