How to Use Sony WH-1000XM4 with Two Devices Simultaneously

If you own the Sony WH-1000XM4 headphones, you might wonder how to connect them to two devices at once—such as your phone and your computer—so you can switch seamlessly between calls and media without disconnecting and reconnecting. This feature, known as multipoint pairing, enhances your listening experience by allowing you to manage multiple devices effortlessly. Setting up and using this functionality correctly ensures you never miss an important call or notification while enjoying your music or podcasts. Before starting, make sure your headphones are charged and within range of your devices, and that both devices support Bluetooth connectivity.

What You’ll Need

• Sony WH-1000XM4 headphones
• Two Bluetooth-enabled devices (smartphone, tablet, computer, etc.)
• Basic familiarity with Bluetooth pairing procedures

Step-by-Step

1. Charge Your Headphones: Ensure your Sony WH-1000XM4 are fully charged for a smooth setup process.
2. Power On and Enter Pairing Mode: Turn on your headphones by pressing the power button. If they are already paired with one device, reset pairing mode by holding the power button and custom button (located on the left earcup) simultaneously until you see an LED indicator flashing blue and red. This indicates the headphones are in pairing mode.
3. Pair with the First Device: On your first device (say, your smartphone), turn on Bluetooth and select “WH-1000XM4” from the list of available devices. Confirm pairing if prompted. Once connected, the headphones will remember this device for future use.
4. Activate Multipoint Pairing: To enable the headphones to connect to a second device, press and hold the custom button on the left earcup for about 7 seconds until the LED flashes blue rapidly. Alternatively, if the headphones are already connected to one device, simply hold the custom button to enter pairing mode again, and then select the second device from its Bluetooth menu.
5. Connect the Second Device: On your second device (e.g., your laptop), turn on Bluetooth and select “WH-1000XM4.” The headphones should automatically connect to both devices if they support multipoint pairing. If not, you may need to manually connect them via Bluetooth settings.
6. Verify Both Connections: Check the headphone’s indicator lights or the Bluetooth device list to ensure both devices are connected. The headphones can typically maintain active connections to two devices simultaneously, allowing you to switch between them easily.
7. Switching Between Devices: When using the headphones, audio from the first device (say, your phone) will play by default. To listen to audio from the second device, pause or stop the playback on the first device, then start playback on the second. The headphones will automatically switch audio streams if supported, or you may need to manually select the audio source on your device or headphones.
8. Managing Connections: To disconnect from one device or switch back, simply pause or disconnect on the current device, and the headphones will revert to the other device if connected. You can also manually disconnect or reconnect via Bluetooth settings on your devices.
9. Resetting Pairings if Necessary: If you encounter issues, reset the headphones by turning them off, then entering pairing mode again, and removing the device connections from your Bluetooth settings.

Common Mistakes

• Not enabling multipoint pairing properly: Some users attempt to connect two devices without entering the correct pairing mode, leading to only one device being recognized.
• Using devices that do not support multipoint pairing: Not all Bluetooth devices can maintain multiple connections simultaneously. Confirm that your devices support this feature.
• Forgetting to disconnect or switch devices: Forgetting to manually switch or disconnect can cause audio to continue playing on the wrong device, leading to confusion.
• Not updating firmware: Outdated firmware may cause connectivity issues. Keep your headphones updated via the Sony Headphones Connect app.

Tips

• Use the Sony Headphones Connect App: This app provides easy management of Bluetooth connections, firmware updates, and customizing the headphone settings, making multipoint pairing easier to handle.
• Keep devices within range: Bluetooth typically works best within 10 meters (33 feet). Keep your devices close to avoid disconnections.
• Label your devices: Name your devices clearly in Bluetooth settings to avoid connecting to the wrong one.
• Stay updated: Regularly update your headphones’ firmware to benefit from improved connectivity and bug fixes.
• Practice switching: Get familiar with how your headphones behave when switching between devices to avoid surprises during critical moments like calls or presentations.

By following these steps, you can maximize the convenience of your Sony WH-1000XM4 headphones, seamlessly switching between multiple devices without the hassle of disconnecting and reconnecting each time. This setup is especially useful for professionals, students, or anyone who relies on multiple Bluetooth devices throughout the day, ensuring you stay connected and productive with minimal interruption.

Related

• 20 Best Hoodoo Gurus Songs: Greatest Hits Ranked
• 20 Best Songs of Dami Im: The Ultimate Greatest Hits Guide
• 20 Best Dean Lewis Songs of All Time: The Ultimate Greatest Hits Guide