Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

Next Steps in Intarsia: 10 Techniques to Master

So you’ve knit your first intarsia piece—maybe a simple geometric bag or a monogrammed cushion—and you’re hungry for more. This listicle is for knitters who already understand the basics of twisting yarns at color changes and are ready to level up their intarsia game. We’ll cover ten concrete techniques and approaches that will make your colorwork cleaner, faster, and more polished, from choosing better yarns to finishing your pieces like a pro.

1. Master the Intarsia Twist (Both Directions)

The most common mistake in intarsia is twisting yarns inconsistently, which leaves holes or loose stitches. Practice the twist in both directions: when moving from left to right, bring the new yarn over the old; when moving right to left, bring it under. This creates a neat, tight join every time. Once you can do this without thinking, your color blocks will look seamless on both the front and back.

2. Use a Separate Ball or Bobbin for Each Color Section

It sounds obvious, but the real trick is managing the tangle. Invest in a set of lightweight bobbins—the kind that clip onto your yarn—and wind a small amount of each color before you start. This keeps your working yarns organized and prevents the dreaded knotted mess that happens when you’re juggling multiple full skeins. For larger projects, consider using a yarn bowl with multiple compartments or even a few small bags to keep each color separate.

3. Try the Intarsia in the Round (with a Twist)

Intarsia is traditionally worked flat because working in the round creates a spiral that misaligns color blocks. But you can adapt it by working back and forth on circular needles, then seaming the sides. For a truly seamless look, try the “intarsia in the round” method using a steek—knit the piece flat, then cut and steek the edges. This is advanced, but it opens up the possibility of intarsia sweaters without side seams.

4. Block Aggressively to Even Out Tension

Intarsia pieces often have uneven tension at color changes, especially if you’re new to the technique. After you finish, wet block your piece aggressively—pin it out to the exact measurements and let it dry completely. This evens out the stitches and often hides minor tension inconsistencies. For wool, use a gentle wool wash and warm water; for superwash wools, you can even use a hot water soak to help set the shape.

5. Knit Intarsia with a Ladder-Back Jacquard Alternative

If you find intarsia’s many bobbins fiddly, consider a hybrid approach: work the color blocks in the round using a ladder-back jacquard technique, where you carry the unused color along the back in a loose ladder. This is not true intarsia, but it gives a similar look with fewer ends to weave in. It’s particularly useful for small, repeated motifs like dots or stripes that would otherwise require many bobbins.

6. Weave in Ends as You Go

One of the biggest downsides of intarsia is the sheer number of yarn ends. Instead of saving them all for the end, weave in each end as you finish a color block. Use a tapestry needle and weave the end back through the stitches of the same color on the wrong side, following the path of the yarn. This takes a little extra time during knitting but saves you hours of finishing later.

7. Choose the Right Yarn for Crisp Color Blocks

Yarn choice dramatically affects intarsia. Smooth, tightly spun yarns with good stitch definition—like a wool or wool-blend fingering or DK weight—show off your color changes best. Avoid fluffy or highly textured yarns like mohair or boucle, which blur the edges of your color blocks. Also, consider the fiber content: wool has natural elasticity that helps the stitches settle evenly after blocking.

8. Chart Your Design on Knitting Graph Paper

Before you cast on, map out your intarsia design on knitting graph paper, where each square represents one stitch and two rows. This helps you plan the shape of your color blocks and see how increases and decreases will affect the lines. For curved shapes, remember that a diagonal line in intarsia is created by shifting the color boundary by one stitch every row or every other row—plan that shift carefully to get smooth curves.

9. Practice the “Intarsia Shortcut” for Large Backgrounds

If your design has a large background color, you don’t need a separate ball for every section of that background. Instead, carry the background yarn loosely across the back of the work when it’s not in use, catching it every few stitches to avoid long floats. This is a hybrid of intarsia and stranded knitting, and it reduces the number of bobbins significantly. Just be careful not to pull the floats too tight, or your fabric will pucker.

10. Finish with a Firm Seam for Garments

When you’re making an intarsia garment, the seams are critical. Use a mattress stitch for side seams—it creates an invisible join that doesn’t interrupt the color pattern. For shoulder seams, a three-needle bind-off is stronger and neater than seaming. Always block your pieces before seaming, and use a yarn needle with a blunt tip to avoid splitting the yarn.

How to Choose

Not every technique is right for every project. If you’re making a small item like a hat or a bag, focus on mastering the twist and using bobbins efficiently—those two skills will make the biggest difference. For a large garment, prioritize charting your design and planning your yarn management, because that’s where intarsia gets messy. If you hate finishing, try the ladder-back jacquard alternative or weave in ends as you go. Ultimately, the best next step is the one that addresses your biggest current frustration—whether that’s tangles, tension, or the dreaded end-weaving marathon.

Frequently Asked Questions

Q: How do I avoid holes at color changes?
Holes happen when you don’t twist the yarns at the change. Always twist them—bring the new yarn over the old when moving left to right, and under when moving right to left. Also, make sure your tension is consistent at the join.

Q: Can I do intarsia in the round without steeking?
Yes, you can work intarsia flat and then seam it, or use a circular needle and turn your work at the end of each round, but that creates a jog. For a true seamless tube, you’d need to use a steek, which involves cutting your knitting—a scary but doable technique.

Q: What’s the best yarn for intarsia?
Smooth, tightly spun wool or wool blends with good stitch definition are ideal. Avoid novelty yarns, and consider a light-colored yarn for the background to make your color blocks pop.

Q: How do I keep my bobbins from tangling?
Use a bobbin holder or a yarn bowl with multiple compartments. Also, try to keep your bobbins on the same side of the work, and rotate your work as you go to minimize twisting.

Q: Is intarsia harder than fair isle?
It’s different. Intarsia is easier on tension because you only carry one yarn at a time, but it requires more yarn management and finishing. Fair isle is faster but requires careful float tension. Most knitters find one more natural than the other.

Q: How do I fix a mistake in intarsia?
If you catch it quickly, you can tink (unknit) back to the mistake. If it’s deep, you may need to drop down to the mistake and pick up the stitches with a crochet hook. For color changes, it’s often easier to just rip back to the row before the mistake and re-knit.

Final Thoughts

Intarsia is a skill that rewards patience and practice. Each of these ten steps addresses a common pain point, from the initial twist to the final seam. Pick one or two to focus on for your next project, and you’ll find your intarsia work becomes cleaner, more enjoyable, and more professional. The key is to keep knitting—every piece teaches you something new.

Next Steps in Intarsia: 10 Techniques to Master
Scroll to top