
These oven-baked Korean BBQ beef ribs use meaty, bone-in English-cut short ribs braised until tender in a savory-sweet soy, brown sugar, garlic, and ginger sauce. A quick finish under the broiler gives the ribs a glossy, caramelized coating without needing an outdoor grill.
The method is forgiving and mostly hands-off: marinate the ribs while you can, then bake them covered until a fork slides easily into the meat. Expect deep savory flavor, gentle sweetness, warm ginger, and a little optional gochugaru heat. Start a few hours before dinner so the ribs have time to become tender.
Why This Recipe Works
English-cut short ribs are thick and meaty, so they benefit from moist, covered oven cooking rather than the brief high heat used for thin Korean-style flanken ribs. A moderate oven gives the connective tissue time to soften while the covered dish limits evaporation. The ribs are ready when the meat is tender and loosening from the bone, not simply when a timer sounds.
The marinade balances salty soy sauce with brown sugar, aromatic garlic and ginger, and a small amount of sesame oil. Rice vinegar keeps the sweetness from feeling heavy; gochugaru adds adjustable warmth. Some of the marinade is held back before it touches raw beef, so you can reduce it into a clean finishing glaze. Broiling the glazed ribs only at the end helps the sugar brown without exposing it to hours of high heat.
Ingredients
- 3 lb bone-in English-cut beef short ribs, cut into individual ribs or portions
- 1/2 cup low-sodium soy sauce
- 1/3 cup packed light or dark brown sugar
- 5 medium garlic cloves, finely minced, about 1 1/2 tbsp
- 1 tbsp freshly grated ginger
- 1 tsp toasted sesame oil
- 1 tsp Korean red pepper flakes (gochugaru), or less to taste
- 4 medium green onions, finely chopped, divided
- 2 tbsp unseasoned rice vinegar
- 1 cup low-sodium beef broth or water, divided
- 1/4 tsp ground black pepper
- 1 tsp sesame seeds, for serving, optional
Ingredient Notes
Beef short ribs: This recipe is written for English-cut ribs, which are cut parallel to the bone into thick pieces. They are not the thin cross-cut flanken ribs often sold for quick Korean barbecue; those need a different, much shorter cooking method. Ask the butcher for English-cut short ribs if the label is unclear. Ribs vary in thickness, so use the fork-tender cue as your guide.
Soy sauce and brown sugar: Soy sauce supplies the salty, savory base, and brown sugar rounds it out and helps the glaze caramelize. Low-sodium soy sauce makes the finished sauce easier to control; regular soy sauce works, but the result may be saltier. Light or dark brown sugar is fine. Avoid adding extra salt before tasting the reduced sauce.
Garlic and ginger: Freshly minced garlic and freshly grated ginger give the marinade its bright, pungent aroma. In a pinch, use 1 tsp garlic powder in place of the fresh garlic and 1 tsp ground ginger in place of the fresh ginger, though the flavor will be less vivid.
Sesame oil and gochugaru: Toasted sesame oil is potent, so a teaspoon is enough for a nutty note. Use plain sesame oil if that is what you have. Gochugaru is Korean red pepper powder or flakes with a distinct, gently fruity warmth; use 1/2 tsp for mild heat or omit it. Crushed red pepper can substitute, but it is often sharper, so start with a smaller amount.
Green onions, vinegar, and broth: Green onions add freshness and color; reserve some for serving. Rice vinegar provides a clean tart note. If you do not have it, use cider vinegar in the same amount. Beef broth gives the braising liquid extra savoriness, while water also works. Use unsalted or low-sodium broth if available.
Instructions
- Make the marinade and reserve glaze. In a bowl, whisk the soy sauce, brown sugar, garlic, ginger, sesame oil, gochugaru, rice vinegar, black pepper, and 2 tbsp of the beef broth or water. Stir in half of the chopped green onions. Before adding the beef, transfer 1/3 cup of this mixture to a small covered container and refrigerate it. This portion has not touched raw meat and will become the finishing glaze.
- Marinate the ribs. Put the ribs in a large food-safe container or resealable bag and pour the remaining marinade over them. Turn the pieces so they are coated, cover, and refrigerate for at least 2 hours and up to 12 hours, turning once if convenient. The ribs should smell aromatic and be evenly coated; refrigeration keeps the beef at a safe temperature while it absorbs flavor. Do not marinate on the counter.
- Heat the oven and arrange the ribs. Set a rack in the middle of the oven and heat it to 300°F. Transfer the ribs and their marinade to a snug ovenproof baking dish or Dutch oven, arranging them in one layer as much as possible. Pour in the remaining 3/4 cup broth or water. The liquid will not cover the ribs; it creates a moist braising environment. Cover the dish tightly with a lid or foil.
- Braise until tender. Bake covered for 2 1/2 to 3 1/2 hours. Begin checking around 2 1/2 hours: a fork should enter the meat with little resistance, and the meat should be starting to pull away from the bones. If it still feels firm or chewy, cover it again and continue baking in 20- to 30-minute increments. Thick ribs may need the longer end of the range. The goal is tenderness, not a particular number of minutes.
- Reduce the clean glaze. While the ribs finish, pour the reserved marinade into a small saucepan. Bring it to a full boil over medium-high heat, then lower the heat and simmer for 3 to 5 minutes, stirring, until it looks slightly syrupy and coats a spoon. It will thicken more as it cools. Boiling is important before serving the reserved mixture; never use a marinade that has touched raw beef as a finishing sauce unless it is thoroughly cooked.
- Prepare the ribs for browning. When tender, lift the ribs from the braising liquid and set them on a foil-lined rimmed baking sheet. Let excess liquid drain back into the dish. If the surface is very wet, gently blot it with paper towels so the glaze can cling. Spoon or brush a thin layer of the boiled glaze over the ribs. They should look shiny, not submerged in sauce.
- Broil and serve. Set the oven to broil and place the baking sheet several inches below the element. Broil for 1 to 3 minutes, watching continuously, until the glaze bubbles and develops browned spots. Sugar can go from caramelized to burnt quickly, so do not walk away. Turn the ribs if needed and broil the other side briefly. Serve hot with the remaining glaze, the reserved green onions, and sesame seeds if using. For food safety, beef should reach at least 145°F and rest for 3 minutes; these braised ribs will generally cook beyond that minimum as they become tender.
Tips for Success
- Check the cut before you begin. Thick English-cut ribs need a long covered braise. Thin flanken-cut ribs are not interchangeable here; they cook much faster and can become dry during a multi-hour bake.
- Leave room for the ribs. A snug single layer helps the pieces cook evenly. If they are stacked tightly, use a larger dish or arrange them so the liquid and steam can circulate.
- Keep the dish tightly covered. A loose foil tent lets too much moisture escape. Crimp foil around the rim or use a well-fitting lid, and check that there is still some liquid in the dish if you need to extend the cooking time.
- Let tenderness set the finish time. Oven temperatures, rib thickness, and the dish itself vary. A fork slipping into the meat easily is more useful than relying only on the clock.
- Use a thermometer correctly. Check the thickest part of the meat without touching bone. The USDA safe minimum for beef is 145°F followed by a 3-minute rest; for this braise, tenderness will usually call for cooking well past that minimum.
- Glaze in thin layers. Too much sauce on the ribs can run off or scorch under the broiler. Brush on a light coating, broil briefly, then add more at the table.
- Save the braising liquid. Spoon off excess fat if you like, then serve a little of the cooked liquid alongside the ribs. Taste it first; it can be salty and may need dilution with a splash of water.
Troubleshooting
The ribs are still tough after the stated time. Cover them again and keep baking at 300°F, checking every 20 to 30 minutes. Toughness means the connective tissue needs more time; raising the oven temperature is more likely to dry the edges than to solve the problem.
The sauce tastes too salty. Use low-sodium soy sauce next time and avoid reducing the braising liquid too far. For this batch, thin the serving sauce with a little water or unsalted broth, and serve it in modest amounts rather than pouring it over the ribs.
The glaze is burning under the broiler. Move the pan farther from the element, reduce the broiling time, or switch to a 425°F oven for a few minutes. Remove any blackened pieces of glaze; the ribs do not need a long browning step because they are already cooked and tender.
The ribs seem dry. They may have been cooked uncovered, baked after becoming tender, or cut thinner than expected. Keep them covered during braising, check thin pieces early, and serve with a spoonful of warm braising liquid or glaze.
The glaze is thin. Simmer the reserved clean glaze a little longer, stirring often. Stop when it lightly coats a spoon; it thickens as it cools. If it becomes too thick, stir in a teaspoon of water at a time.
Variations
Adjust the heat: Omit gochugaru for a mild, sweet-savory version, or increase it to 2 tsp for more warmth. Add gradually if you are unsure of its heat level.
Add pear or apple: For a fruitier marinade, finely grate 1/2 Asian pear or a small sweet apple and mix it in. It adds moisture and sweetness, so keep the brown sugar as written the first time and taste the cooked glaze before adding more.
Make it less sweet: Reduce the brown sugar to 1/4 cup. The glaze will be less sticky and less sweet, but the soy, garlic, and ginger will still come through.
Use thin flanken ribs instead: This is a different cut and should not be braised for hours. Marinate flanken-cut ribs in the refrigerator for 1 to 4 hours, then roast on a foil-lined pan at 425°F, turning once, until browned and cooked through; check early because thin slices cook quickly. Follow the package thickness and verify the beef reaches at least 145°F with a 3-minute rest. Keep the sauce separate and boil it before using as a glaze.
What to Serve With It
Steamed short-grain rice is an easy partner for the rich sauce. Add a crisp vegetable side such as cucumber salad, lightly dressed shredded cabbage, or steamed broccoli to bring freshness and crunch. Roasted carrots, sautéed greens, or simply sliced cucumbers also work well. For a fuller Korean-inspired spread, serve small portions of kimchi or another tangy pickle if you have them; their acidity contrasts nicely with the sweet-salty ribs.
Keep the sauce on the side so people can choose how much they want. If serving rice, spoon a little glaze over the rice rather than adding all the braising liquid, which can be quite concentrated.
Make-Ahead, Storage and Reheating
You can marinate the ribs up to 12 hours ahead, covered in the refrigerator. The clean reserved glaze can also be made ahead and refrigerated separately. Cooked ribs and sauce should be refrigerated within 2 hours of cooking in shallow, covered containers. Store them for 3 to 4 days in the refrigerator.
For longer storage, freeze cooked ribs with some sauce in a freezer-safe container. For best quality, use within 2 to 3 months. Thaw overnight in the refrigerator rather than on the counter. Reheat covered in a 300°F oven with a splash of water or broth until hot throughout, or reheat portions in the microwave, stirring or turning as needed. Reheat leftovers to 165°F. Add the glaze near the end of reheating so it warms without scorching.
Recipe Card
Servings: 4 to 6
Prep time: 20 minutes, plus 2 to 12 hours marinating
Cook time: 2 hours 40 minutes to 3 hours 40 minutes
Total time: About 5 to 16 hours, including marinating
Ingredients
- 3 lb bone-in English-cut beef short ribs
- 1/2 cup low-sodium soy sauce
- 1/3 cup packed brown sugar
- 5 garlic cloves, minced
- 1 tbsp grated fresh ginger
- 1 tsp toasted sesame oil
- 1 tsp gochugaru
- 4 green onions, chopped and divided
- 2 tbsp unseasoned rice vinegar
- 1 cup low-sodium beef broth or water, divided
- 1/4 tsp ground black pepper
- 1 tsp sesame seeds, optional
Condensed steps
- Whisk soy sauce, brown sugar, garlic, ginger, sesame oil, gochugaru, green onions, vinegar, pepper, and 2 tbsp broth. Reserve 1/3 cup before it touches the beef.
- Marinate ribs in the remaining mixture, covered and refrigerated, for 2 to 12 hours.
- Heat oven to 300°F. Put ribs and marinade in a snug covered baking dish with the remaining 3/4 cup broth.
- Bake covered for 2 1/2 to 3 1/2 hours, until a fork enters the meat easily and it is pulling from the bone.
- Boil the reserved clean marinade for 3 to 5 minutes, then simmer until slightly syrupy.
- Move ribs to a foil-lined baking sheet, brush lightly with glaze, and broil 1 to 3 minutes, watching closely. Serve with remaining glaze, green onions, and sesame seeds.
Frequently Asked Questions
Can I make these ribs without marinating overnight?
Yes. Two hours in the refrigerator gives the surface time to take on flavor, and the long braise carries the seasoning through the dish. If you have only a short window, marinate for as long as you can while keeping the beef refrigerated.
Can I use flanken-cut Korean short ribs?
Not with the long braising instructions. Flanken ribs are thin slices cut across the bones and cook much faster than English-cut ribs. Use the quick-roasting variation above and check them early; the thick-rib timing would overcook them.
Do I need to brown the ribs before baking?
No. Browning is optional and is not needed for tenderness. The final broil adds color and a caramelized surface. Skipping a preliminary sear also keeps the method simple and avoids splattering.
Can I make the recipe without gochugaru?
Yes. Leave it out for a mild result. The ribs will still have the savory-sweet flavor of soy, brown sugar, garlic, and ginger. Crushed red pepper can be used instead, starting with a smaller amount.
Can I cook the ribs in a slow cooker?
The ingredients can be adapted, but this recipe’s timing and broiling finish are written for an oven. A slow cooker may produce a different texture and sauce concentration, so follow the appliance’s guidance and check the ribs for fork tenderness before finishing them under the broiler.
Can I prepare the ribs a day ahead?
Yes. Cook them fully, cool and refrigerate them promptly, then reheat covered with a little broth or water. Heat leftovers to 165°F and apply the glaze near the end so it does not burn.
How do I know when the short ribs are done?
They should be very tender: a fork should slide into the meat with little resistance, and the meat should begin pulling away from the bone. Use a food thermometer in the thickest meat, away from bone; beef must reach at least 145°F and rest for 3 minutes for the USDA minimum, while braised ribs generally need more cooking for tenderness.
Can I reuse the marinade?
Do not serve marinade that has touched raw beef as-is. In this recipe, the clean reserved portion is boiled separately for the glaze. The marinade in the baking dish is cooked during the braise; any portion you plan to serve should be thoroughly heated.
