After a home inspection, sellers often face a list of requested repairs. Knowing which ones to handle, which to negotiate, and which to skip can save you time and money while keeping the deal on track. This guide covers the most common repair categories, what matters most to buyers and appraisers, and how to approach the negotiation process—whether you’re a first-time seller or a seasoned investor.
Structural and Foundation Issues
Cracks in the foundation, sagging floors, or bowing walls are deal-breakers for most buyers. These issues signal potential long-term instability, and lenders often require them to be fixed before approving a mortgage. Hiring a structural engineer to assess the severity is worth the cost, as their report can guide whether a simple epoxy injection or a more involved underpinning is needed. Even if you choose not to complete the repair, providing a professional assessment shows good faith and can help negotiate a credit instead.
Roof Damage and Leaks
A leaking roof or missing shingles are common inspection findings that buyers expect to be addressed. If the roof is nearing the end of its lifespan, buyers may ask for a full replacement, but a few damaged shingles can be repaired for a fraction of the cost. Get a roofing contractor to provide a written estimate and warranty for any work done—this gives the buyer confidence and prevents post-sale disputes. If you opt for a credit, base it on the actual repair quote, not a guess.
Electrical Safety Hazards
Outdated wiring, exposed junctions, or a overloaded panel are serious safety concerns that inspectors flag. Fixing these is non-negotiable for most buyers because they pose fire and shock risks. Common fixes include replacing knob-and-tube wiring, installing GFCI outlets in wet areas, and upgrading a federal panel. While these can be costly, a licensed electrician’s work with a permit and inspection certificate will satisfy both the buyer and the local code authority.
Plumbing Leaks and Water Pressure
Dripping faucets, running toilets, or low water pressure might seem minor, but they can indicate bigger problems like corroded pipes or a failing water heater. Addressing visible leaks and ensuring proper water pressure are quick wins that show the home is well-maintained. If the inspection reveals polybutylene pipes or a sewer line issue, expect a larger negotiation—these are expensive to replace and often require a specialist. Providing a clean bill of health from a plumber can keep the sale moving.
HVAC System Functionality
A heating or cooling system that doesn’t work or is on its last legs is a common sticking point. Buyers want assurance that the system will last a few more years, so a tune-up and cleaning by a licensed technician can resolve many complaints. If the system is beyond repair, you may need to offer a credit or replace it, but first get a second opinion—some inspectors flag age alone, not actual failure. A service record showing regular maintenance can also ease buyer concerns.
Water Heater and Major Appliances
An old or malfunctioning water heater is a frequent inspection item. If it’s leaking or not producing hot water, replace it with an energy-efficient model—this is a relatively straightforward fix that adds value. For other appliances like stoves or dishwashers, minor repairs or a professional cleaning may suffice. Ensure any included appliances are in working order, as buyers expect them to function on move-in day.
Mold and Moisture Problems
Visible mold, musty odors, or signs of water intrusion are red flags that can derail a sale. Identify the source of moisture first—whether it’s a leaking pipe, poor ventilation, or a cracked basement floor—and fix that before treating the mold. Small areas can be cleaned with a bleach solution, but larger infestations require professional remediation. Provide documentation of the cleanup and any moisture barriers installed to reassure the buyer.
Pest Infestations
Termites, carpenter ants, or rodents are not only unsettling but can cause structural damage over time. A licensed pest control company should inspect and treat the affected areas, and you may need to repair any wood damage they uncover. Many buyers will require a clearance certificate before closing, so schedule the treatment early. If the infestation is severe, expect to pay for both extermination and repairs, but it’s better than losing the sale.
Safety Code Violations
Missing smoke detectors, ungrounded outlets, or a lack of handrails on stairs are safety issues that inspectors almost always note. These are typically inexpensive to fix and can be done quickly by a handyman. Bringing the home up to current safety codes not only satisfies the buyer but also protects you from liability. Check with your local building department for specific requirements, as they vary by area.
Cosmetic and Minor Defects
Chipped paint, cracked tiles, or a sticky door are often listed in the inspection report but rarely warrant a repair request. Buyers may ask for these to be fixed, but you can counter with a small credit or a home warranty instead. Focus on items that affect function or safety, and politely decline purely cosmetic requests. This approach keeps the negotiation focused on what truly matters.
How to Choose
When deciding which repairs to make, prioritize safety and structural issues above all—these are non-negotiable for buyers and lenders. Next, address any systems that are broken or at risk of failing, like the roof or HVAC, as these are common deal-breakers. For minor items, consider offering a credit or a home warranty rather than performing the repair yourself. Always get multiple quotes and keep receipts, as this documentation can be shared with the buyer to build trust. If a repair is too costly, negotiate a credit that reflects the actual estimate, and be prepared to compromise to keep the sale alive.
Frequently Asked Questions
Do I have to fix everything the inspector finds? No, but you must address anything that affects safety, structure, or systems. Cosmetic issues are negotiable.
Can I refuse to make repairs? Yes, but the buyer may walk away or ask for a price reduction. It’s often better to negotiate than to lose the deal.
What if the buyer asks for a credit instead of a repair? That’s common—you can agree on a dollar amount that covers the estimated cost, and the buyer handles the work after closing.
Should I fix things myself or hire a pro? For simple tasks like replacing a faucet, DIY is fine, but for electrical, plumbing, or structural work, always hire a licensed professional.
How long do I have to complete repairs? Usually a few days to a couple of weeks, depending on the contract. Be sure to meet the deadline to avoid delays.
What if the repair is too expensive? Offer a credit or a home warranty instead. If the buyer insists, you can try to split the cost or negotiate the sale price.
Final Thoughts
Handling seller repairs after a home inspection is about balancing cost, safety, and the sale itself. Focus on what’s essential, document everything, and keep communication open with the buyer. A little flexibility can go a long way in closing the deal smoothly.