
This simple bread machine loaf uses bread flour, yeast, warm water, a little sugar, salt, and oil or butter. Add the ingredients to your machine’s pan, choose the basic white-bread cycle, and let the machine mix, knead, rise, and bake the loaf.
The small details make the difference: use water that is warm rather than hot, measure the flour without packing it, and check the dough during the first kneading. The result is a mild, tender loaf with a thin golden crust—good for sandwiches, toast, or a warm slice with butter.
Why This Recipe Works
Bread flour gives the dough enough protein to form a resilient gluten network. That structure traps the gas produced by yeast, helping the loaf rise instead of baking up dense. You can use all-purpose flour if that is what you have, but the crumb may be a little softer and the loaf may not rise quite as high.
The water is measured at about 110°F (43°C), warm enough to help the yeast get started without exposing it to very hot liquid. Yeast performance also depends on the product and the bread machine cycle, so follow the machine’s instructions for adding ingredients and selecting a cycle. In many machines, liquids go in first and yeast goes on top of the flour, kept apart from the salt until mixing begins.
Sugar adds a subtle sweetness and provides food for the yeast; it does not make this loaf taste like cake. Salt balances the flavor and helps keep fermentation in check. Oil or melted butter softens the crumb and helps the bread stay pleasant to eat after it cools. Together, these familiar ingredients make a dependable everyday loaf without complicated shaping or proofing.
A quick dough check during the first kneading is especially useful. Bread flour absorbs water differently depending on how it was stored and measured, so the dough may need a small adjustment. A good dough gathers into a soft, slightly tacky ball. It should not slosh around like batter or remain a dry, floury mass.
Ingredients
- 3 cups bread flour, spooned into the measuring cup and leveled
- 1 ¼ teaspoons salt
- 2 tablespoons granulated sugar
- 2 ¼ teaspoons bread machine yeast, or 1 packet (about 7 g)
- 1 ¼ cups warm water, about 110°F (43°C)
- 2 tablespoons vegetable oil or melted butter, cooled slightly if warm
Ingredient Notes
Bread flour: Its higher protein content helps create a stretchy dough and a well-shaped loaf. All-purpose flour can stand in cup for cup, though the texture may be less chewy and the loaf a bit shorter. For the most consistent result, measure by weight if your machine manual provides a flour-weight conversion; cup weights can vary.
Salt: Fine table salt dissolves readily and is easy to measure. If using coarse salt, check that it dissolves during mixing. Salt is important for flavor and dough behavior, so do not leave it out. Keep it from sitting directly on the yeast before the cycle starts.
Sugar: Regular granulated sugar is the simplest choice. Honey can be used in the same volume, but it adds its own flavor and moisture, so the loaf may turn out slightly different. The sugar here is for a lightly rounded flavor, not a sweet bread.
Yeast: Bread machine yeast or instant yeast is convenient because it can be added directly to the dry ingredients. One standard packet is about 2 ¼ teaspoons. Active dry yeast can also work, but some machines or recipes call for dissolving it first; follow the yeast package and your machine’s manual. Check the expiration date if the loaf does not rise as expected.
Warm water: Use a kitchen thermometer if you are unsure. Water that feels hot to the touch can be too hot for yeast. If you do not have a thermometer, aim for comfortably warm water, not steaming. Use water that tastes pleasant and has no strong chlorine odor; bottled water is not normally necessary.
Oil or butter: Neutral vegetable oil gives a soft, straightforward loaf. Melted butter adds a gentle buttery aroma; let it cool enough that it is not hot when added. Olive oil can be used, but its flavor will be noticeable.
Instructions
- Check the machine and measure the ingredients. Make sure the bread pan and kneading paddle are clean and properly seated. Measure the water at about 110°F (43°C), and spoon and level the flour rather than scooping and compacting it. Accurate measuring matters because a bread machine works with a fixed amount of dough and cannot compensate for a large excess of flour or liquid.
- Load the pan in the order your machine recommends. Many machines call for water and oil or butter first, followed by flour, sugar, and salt, with the yeast placed in a small well on top of the flour. Other machines specify a different order; follow the manual if it differs. Keep the yeast from direct contact with the salt and liquid until mixing begins, especially if using a delay timer, because this helps the yeast remain dry before the cycle starts.
- Select the basic or white-bread cycle. Choose the 1 ½-pound loaf setting if your machine offers loaf sizes, and choose a light or medium crust to start. Use the regular basic cycle rather than a rapid cycle for a more even rise and a tender crumb. The machine should begin mixing within the first part of the program; check that the paddle is moving and the ingredients are coming together.
- Check the dough during the first kneading, usually after 5–10 minutes. Open the lid briefly and look for a soft, cohesive ball that pulls away from the sides while remaining slightly tacky. If it is dry, crumbly, or leaving flour in the corners, add water 1 teaspoon at a time. If it is very wet, smearing across the bottom and not forming a ball, add flour 1 tablespoon at a time. Wait a minute between additions so the dough has time to absorb them. Small adjustments are better than adding a lot at once.
- Let the machine finish the cycle without lifting the lid during the rise. The dough should rise visibly and then bake to a browned top; the exact cycle length varies by model, commonly around 3–4 hours. Avoid opening the lid while the loaf is rising, since a sudden loss of warmth can interfere with its rise. Near the end, look for a firm top and a baked-bread aroma rather than a wet, raw-dough smell.
- Remove the loaf promptly and cool it. When the cycle ends, use oven mitts to lift out the hot pan, then turn the loaf onto a rack. Remove the kneading paddle if it is stuck in the bottom, taking care because the loaf and paddle are hot. Let the bread cool for at least 1 hour before slicing. Cooling lets the crumb finish setting; cutting too soon can make the center seem gummy even when the loaf is baked.
- Optional oven method if your machine has a dough cycle only: Run the dough cycle, then turn the finished dough onto a lightly floured surface. Shape it into a loaf and place it seam-side down in a greased 9-by-5-inch loaf pan. Cover loosely and let rise in a warm, draft-free place until the dough crowns about 1 inch over the pan rim, often 30–60 minutes. Bake in a preheated 375°F (190°C) oven for about 30–35 minutes, until the top is golden and the center reaches about 190–200°F (88–93°C) on an instant-read thermometer. If the top browns too quickly, loosely cover it with foil for the remaining bake. Cool on a rack before slicing. The temperature and visual cues help confirm the loaf has set through the center.
Serves: 10–12 slices. Prep time: 10 minutes. Cook time: about 3–4 hours in the bread machine. Total time: about 3 hours 10 minutes to 4 hours 10 minutes, plus cooling.
Tips for Success
- Follow your machine’s ingredient order. Machines differ, and the manufacturer’s directions take priority over a general recipe sequence.
- Measure flour gently. Scooping straight from the bag can pack in extra flour and make a dry, heavy loaf. Spoon it into the cup and level the top.
- Check the dough early. A small adjustment during kneading is easier than trying to fix a loaf after baking. Keep additions gradual and give the dough time to absorb them.
- Use fresh yeast. Old or poorly stored yeast may rise slowly or not at all. Store opened yeast airtight according to its package directions.
- Keep the lid closed during rising and baking. Opening it repeatedly releases heat and can affect the rise, particularly before the loaf has set.
- Choose a crust setting that suits your machine. Light is a good starting point if you prefer a soft crust; medium gives more color and a firmer exterior.
- Cool fully before storing or slicing thinly. Warm bread is more delicate and can compress under a knife. A serrated bread knife makes cleaner slices once the loaf has cooled.
Troubleshooting
The loaf is dense or short. Check that the yeast is fresh, the water was not too hot, and the flour was not packed into the cup. Too much flour or too little water can make a stiff dough that struggles to rise. Next time, check the dough during kneading and adjust it until it is soft and slightly tacky.
The top collapses or the loaf sinks. A dough that is too wet or rises too far can lose its structure. Measure the water accurately, check the dough during kneading, and avoid selecting a cycle that is too long for the recipe. If you use a delay timer, make sure the yeast is kept dry and that the machine’s timing is suitable for the ingredients.
The loaf has a pale or floury top. Confirm that the cycle completed and that the loaf size and crust color settings are correct. Flour left in the corners can mean the pan was not mixed evenly; scrape the corners gently with a silicone spatula during the initial kneading, keeping clear of the moving paddle.
The crumb is gummy. Let the loaf cool completely before judging its texture. If it is still gummy when cool, it may be underbaked, too wet, or sliced before the crumb set. On the oven method, check the center with a thermometer and bake until it reaches about 190–200°F (88–93°C).
The bread is too salty or bland. Measure salt levelly rather than heaping the spoon. If flavor seems flat, first confirm that the salt was included and measured correctly; do not change several ingredients at once, since that makes it harder to tell what improved the loaf.
The paddle leaves a large hole. This is normal for many bread-machine loaves because the paddle sits in the bottom of the pan. Remove the paddle from the loaf after baking if it comes out easily, then cool the bread before slicing.
Variations
Butter loaf: Use melted butter instead of vegetable oil for a fuller, lightly buttery flavor. The butter should be melted but not hot when it goes into the pan.
Whole-wheat blend: Replace up to 1 cup of the bread flour with whole-wheat flour to start. Whole-wheat flour absorbs more water and makes a heartier loaf, so check the dough during kneading and add water a teaspoon at a time if it feels unusually stiff. A loaf made entirely with whole-wheat flour will have a denser texture and may need a recipe designed for that flour.
Herb bread: Add 1–2 teaspoons of dried herbs, such as rosemary or Italian seasoning, with the flour. Keep the amount modest so the herbs season the bread without overwhelming it.
Seeded loaf: Add 2–3 tablespoons of sesame, sunflower, or pumpkin seeds when the machine signals for add-ins, if it has a signal. Otherwise, add them near the end of kneading, following the manual. Seeds can make the crumb heavier, so avoid adding a large quantity without adjusting the recipe.
Soft sandwich slices: Choose the light crust setting and let the loaf cool completely before cutting. For especially neat sandwiches, slice with a serrated knife and keep the loaf whole until you are ready to use it.
What to Serve With It
This loaf is mild enough to go with savory or sweet toppings. Serve slices warm with butter, or toast them and add jam, honey, or nut butter. For sandwiches, pair it with sliced cheese, vegetables, egg salad, or cooked chicken. It also works alongside soup, stew, or a simple salad, where the soft crumb is useful for soaking up broth or dressing.
For breakfast, toast a slice and serve it with eggs or fruit. For a quick snack, try a slice with cheese or hummus. If the bread is a day or two old, toasting brings back some crispness and makes it easy to use without wasting the loaf.
Make-Ahead, Storage and Reheating
For the best texture, let the loaf cool completely before storing it. Keep it whole, or slice it once cool, and place it in a bread bag or airtight container at room temperature. Homemade bread is generally best within 2–3 days; warm, humid conditions can shorten that window. Do not seal warm bread, since trapped steam can make the crust damp.
Refrigeration can make bread stale faster, so it is usually not the best choice for everyday storage. If you need to refrigerate it, wrap it well and use it within about a week, checking for any signs of mold before eating. If you see mold on bread, discard the entire loaf rather than cutting away the affected area.
To freeze, wrap the cooled loaf or individual slices tightly and place them in a freezer-safe bag or container. Freeze for up to 2–3 months for best quality. Food kept continuously at 0°F (-18°C) remains safe indefinitely, though its quality can decline over time. Thaw a wrapped loaf at room temperature, or toast frozen slices straight from the freezer. You can also warm thawed slices briefly in a toaster or in a 300°F (150°C) oven; avoid prolonged heating, which dries the bread.
If you want fresh bread in the morning, you may be able to use your machine’s delay timer. Only do so if the machine manual allows it and the ingredients are suitable for delayed mixing. Keep the yeast dry and separate from the water and salt until the cycle begins, and do not use the timer if your machine’s instructions advise against it.
Frequently Asked Questions
Can I use all-purpose flour instead of bread flour?
Yes. Use the same measured amount, but expect a somewhat softer or shorter loaf. Check the dough during kneading because different flours absorb water differently.
Can I use active dry yeast?
Usually, but check both the yeast package and your machine manual. Some directions call for activating active dry yeast in warm water first, while others allow it to be added directly. Do not use water hotter than the yeast directions recommend.
Do I have to use water at exactly 110°F?
No, but keep it warm rather than hot. A thermometer makes the temperature easy to check. Water that is too hot can damage yeast, while cool water may slow the rise and change the cycle’s timing.
Can I use butter instead of vegetable oil?
Yes. Use 2 tablespoons of melted butter and let it cool slightly before adding it. It gives the loaf a mild buttery flavor; vegetable oil has a more neutral taste.
Why does my bread machine loaf have a hole in the bottom?
The kneading paddle may stay in place as the dough bakes, leaving a small hole when the loaf is removed. That is a normal feature of many bread-machine loaves. Remove the paddle after baking if it is easy to take out.
Can I make this recipe without a bread machine?
Yes. Mix and knead the dough until smooth and elastic, let it rise until roughly doubled, shape it in a greased 9-by-5-inch pan, and let it rise until it crowns about 1 inch above the rim. Bake at 375°F (190°C) for about 30–35 minutes, checking for a golden top and a center temperature of about 190–200°F (88–93°C). Exact rise times vary with room temperature and yeast activity.
Can I add ingredients like raisins or cheese?
Yes, but add them near the end of kneading or when the machine signals for add-ins. Keep add-ins moderate so they do not weigh down the dough, and avoid ingredients that are very wet unless the recipe is adjusted for them.
How can I tell whether the loaf is done?
In the bread machine, let the full basic cycle finish and look for a set, browned top. For the oven method, a golden crust and a center temperature around 190–200°F (88–93°C) are useful doneness cues. Let the loaf cool before slicing so the crumb can set.
