
A sourdough starter is a living mixture of flour and water that collects and supports wild yeast and lactic acid bacteria. Refreshing it means keeping a small amount and giving it fresh flour and water; the simple feed here is a practical reset when a starter looks weak, smells sharp, or has been neglected.
Using equal weights of flour and water, with a modest amount of starter, makes the feed easy to repeat and gives the culture fresh food without creating a huge jar. A healthy starter smells pleasantly tangy, fruity, or yeasty and eventually rises with visible bubbles. It is a baking ingredient, not a ready-to-eat snack; its flavor comes through as a mild to assertive tang in bread, depending on how ripe the starter is when used.
Why This Recipe Works
This refresh keeps the old starter in a small proportion compared with the new flour and water. That dilutes built-up acidity and gives the yeast and bacteria fresh food. It also avoids the common beginner mistake of adding a little flour and water to a large, hungry jar without removing any first. That approach leaves a very large culture competing for a small feed.
Weighing the ingredients makes the mixture repeatable. Flour measures differently depending on how it is scooped, while a scale keeps each feed consistent. The equal weights of flour and water make a thick, spoonable mixture that can trap bubbles and show its rise. A straight-sided jar makes that rise easier to judge, and a loose cover lets gas escape without leaving the surface exposed.
Temperature matters as much as feeding. A starter kept in a comfortably warm room generally becomes active sooner than one in a chilly kitchen. Instead of relying on a strict clock, watch for bubbles throughout the mixture, a domed or gently rounded top, and a clear rise from the starting level. Those signs tell you more than a float test, which can give misleading results.
Ingredients
- 20 g ripe or sluggish sourdough starter, measured after discarding down to a small amount
- 40 g room-temperature water
- 40 g unbleached all-purpose flour, bread flour, or a blend with whole-wheat flour
Ingredient Notes
Starter: Use starter that is not moldy or discolored. It may be sluggish, sharply sour, or topped with a little liquid; those conditions alone do not mean it is spoiled. If the starter has fuzzy growth or pink or orange discoloration, discard the entire contents rather than trying to rescue it.
Water: Room-temperature water is easy to mix and will not chill the feed. Tap water is generally suitable. If yours has a strong chlorine smell, use filtered water or water that has been left uncovered briefly. Avoid hot water, which can damage the living culture.
Flour: All-purpose flour is a dependable choice. Bread flour also works. Whole-wheat or rye flour can be used for some or all of the flour; it absorbs water differently and may make the mixture seem thicker, while its nutrients can encourage visible activity. If you switch flour, judge the starter by bubbles and rise rather than expecting exactly the same timing or texture.
No commercial yeast, sweetener, or salt is needed. Adding sugar is not a dependable fix for a weak starter, and salt can slow fermentation. Keep the feeding simple while you work out what the starter needs.
Instructions
- Check the starter and jar. Look closely for fuzzy growth or pink or orange discoloration. If you see either, throw away the starter and wash the jar; do not scrape off the affected part and keep what is underneath. If the starter looks safe to refresh, use a clean, straight-sided jar. This check matters because a feed cannot make a moldy starter safe.
- Keep a small amount. Stir the starter if there is a layer of liquid and no sign of mold, then weigh 20 g into the clean jar. Discard the rest or save it for a cooked recipe if it has been handled safely. Keeping only a small amount leaves room for the culture to rise and gives it a generous fresh feed.
- Mix in the water. Add 40 g room-temperature water and stir until the starter loosens and is mostly dispersed. Aim for a room temperature of about 75°F to 80°F for a quicker, steady refresh. The mixture should look cloudy and loose rather than hold together as a lump; breaking up the starter helps the flour hydrate evenly.
- Add the flour. Stir in 40 g flour until no dry patches remain. Scrape down the inside of the jar and level the surface. The mixture should be thick but stirrable. Mark its starting height with a rubber band or a piece of tape, then cover the jar loosely. A clear starting mark makes the rise easy to see, and a loose cover prevents pressure from building as gas forms.
- Let it ferment and watch it. Leave the jar at about 75°F to 80°F for roughly 4 to 12 hours. Look for bubbles along the sides and through the mixture, a noticeable rise, and a top that is rounded or just beginning to flatten. The timing depends on the starter’s strength, flour, and room temperature. If the kitchen is cool, it can take longer; use the visual cues rather than feeding again just because a set time has passed.
- Use it near its peak or repeat the feed. For baking, use the starter when it has risen well and is still domed or only just starting to recede. If you are rebuilding a very sluggish culture, repeat the same refresh after it has shown activity, keeping only a small amount before feeding again. A strong, predictable rise over repeated feeds is a better sign of readiness than bubbles alone.
Servings: enough to maintain one small starter; prep time: 10 minutes; cook time: none; total time: 4 to 12 hours, or longer in a cool kitchen.
Tips for Success
- Mark the level. A rubber band or removable mark shows whether the starter has risen and fallen. Bubbles can appear without a substantial rise, so track both.
- Keep the cover loose. A lid resting on top or a loosely fitted lid keeps dust out while allowing fermentation gas to escape. Do not seal an actively fermenting jar tightly.
- Use a consistent spot. A stable, comfortably warm place makes feeding patterns easier to interpret. Keep the jar away from direct sun, a hot appliance, and strong temperature swings.
- Feed by weight when possible. A kitchen scale prevents accidental changes to the feeding proportions. If you do not have one, use the same measuring method each time and expect more variation because flour settles and scoops unevenly.
- Keep the jar manageable. Regularly retain a small amount and discard the excess before feeding. This controls volume and gives the retained culture enough fresh food.
- Record what you see. Note the flour, room temperature, feed time, and how long the rise takes. A few simple observations help distinguish a cold starter from one that needs more consistent feeding.
- Do not use the float test as a verdict. A starter can float or sink depending on how much gas it holds and how it is handled. A repeatable rise, bubbles, and a healthy aroma are more useful signs.
Troubleshooting
Fermentation is variable, especially while a new starter is becoming established or when the weather changes. Check for spoilage first, then consider feeding history, temperature, and whether the starter has had enough time to rise.
No Rise
If there are bubbles but little height, the starter may be fermenting without holding gas well, or the jar may be too wide to make a small rise obvious. Move it to a straight-sided container, mark the level, and keep it at about 75°F to 80°F. Give it more time before feeding again. If there are no bubbles and no change, repeat a measured feed and observe it through a full warm interval rather than adding extra flour repeatedly.
Check that the water was not hot and that the starter was not kept in an overheated place. A very new starter can have an early burst of activity followed by a quiet period; that does not by itself mean it has failed. Continue regular refreshments and wait for a stable pattern of rising before relying on it to leaven bread.
Hooch on Top
A thin layer of grayish or brownish liquid is often called hooch. It commonly appears when the starter has gone a while without food. If there is no mold or unusual color, stir the liquid in for a more pronounced acidic flavor, or pour it off for a milder refresh. Then keep a small amount of starter and feed it with fresh flour and water.
Hooch is not a precise measure of how long the starter has been hungry, and a little liquid does not automatically mean the culture is spoiled. Look at the whole starter: fuzzy growth or pink or orange discoloration means discard it, not refresh it.
Mold: Throw It Away
Fuzzy spots, colored patches, or growth that looks unlike ordinary bubbles are a reason to discard the entire starter. Do not skim, scrape, or scoop around the affected area; mold can extend beyond what is visible. Wash the jar and utensils thoroughly before starting again. If you are unsure whether a patch is mold, take the cautious route and discard it.
Unusual Smells
A healthy starter can smell tangy, yeasty, fruity, vinegary, or mildly alcoholic. A sharp acetone-like smell often means it has used up its food and needs a refresh. Keep a small amount, feed it, and watch for renewed bubbling and rise.
Smell alone is not a reliable safety test. A foul or putrid odor, especially with visible mold or pink or orange discoloration, is a reason to discard the whole starter. Do not taste raw starter to decide whether it is safe; raw flour is not ready to eat.
Runny Starter
A starter that pours easily may have too much water for the flour being used, may have separated, or may simply be at a later stage of fermentation. After stirring, it should be thick enough to coat a spoon. For the next feed, measure the flour and water by weight and avoid adding extra water by eye. Whole-grain flour can absorb more water, so a change in flour may also change the texture.
If it was thick just after feeding and became looser as it rose, that can be normal. Fermentation changes the mixture’s structure. Focus on whether it bubbles and rises, not on making every starter look identical.
Too Sluggish in Cold Kitchens
Cool rooms slow fermentation, so a starter may need substantially longer than the timing in the instructions. Move it to a warmer, steady location, such as a shelf away from drafts. A room-temperature range around 75°F to 80°F is a useful target; avoid placing the jar on a hot surface or in direct sun. Excessive heat can harm the culture and make timing unpredictable.
Do not keep feeding a cold starter at short intervals before it has used its previous feed. That repeatedly dilutes the culture and can make it seem weaker. Let it show bubbles and a rise, then refresh it. In a cool kitchen, patience and a marked jar are more helpful than frequent feeds.
Variations
Whole-wheat refresh: Use whole-wheat flour for the full flour portion. The mixture may feel thicker and can ferment differently from an all-purpose feed, so follow the rise rather than the clock.
Rye refresh: Use rye flour for some or all of the flour. Rye makes a dense, sticky mixture and can show active bubbling clearly. Scrape the jar sides after mixing so dried paste does not get mistaken for a change in the starter.
Cool-room schedule: Keep the same measured feed but allow a longer rise in a cool room. Refresh only after the starter has shown activity, and use a stable warm spot if you want a quicker response.
Smaller maintenance feed: Keep a smaller amount of starter and scale the flour and water down in the same proportions by weight. This is useful if you bake infrequently and want to reduce discard, as long as the jar still has ample room to rise.
What to Serve With It
This refresh is meant to prepare a starter for baking, rather than to be served on its own. Use a lively starter in sourdough bread, pancakes, waffles, crackers, or other recipes designed for sourdough. A starter that has peaked and started to recede can still work in many recipes, but its leavening strength may be less predictable.
For a first loaf, choose a straightforward bread recipe that gives the starter time to ferment and includes clear rise cues. The starter brings fermentation and tang; the final flavor also depends on the flour, fermentation time, and baking method. Never serve raw starter or raw discard as a dip or topping.
Make-Ahead, Storage and Reheating
If you bake often, keep the starter at room temperature and refresh it regularly, adjusting the interval to how quickly it rises. If you bake less often, cover the jar and refrigerate it after a feed. A refrigerated starter commonly needs a refresh about once a week for ongoing maintenance. Before baking, bring it out, feed it, and wait for a clear rise; a cold starter may need more than one refresh to regain predictable activity.
For a longer pause, freeze a portion in a labeled, freezer-safe container. Freezing can preserve a starter, though it may take repeated refreshments to become vigorous again after thawing. Thaw it in the refrigerator, then refresh and watch for a reliable rise. Do not tightly seal a jar while the starter is actively fermenting, and leave room for expansion when freezing.
Starter discard is a raw flour mixture, not a cooked leftover. Keep discard covered and refrigerated, and use it in a cooked recipe within 3 to 4 days, or freeze it for up to 2 to 3 months for best quality. Thaw frozen discard in the refrigerator and cook it thoroughly. Do not use discard that shows mold, pink or orange discoloration, or a clearly putrid smell. Reheating is not needed for the starter itself; bake or cook it as part of a recipe.
Frequently Asked Questions
How do I know when my starter is ready to bake with?
Look for a repeatable rise after feeding, bubbles throughout, and a rounded top that is near its highest point. Timing varies with temperature and flour. A starter that has only a few surface bubbles but has not risen much may not yet be dependable for leavening a loaf.
Should I stir hooch into the starter or pour it off?
Either is reasonable when the starter otherwise looks normal. Stir it in for a sharper, more acidic result, or pour it off for a milder refresh. Then keep a small amount and feed it. Never use this choice to excuse fuzzy growth or pink or orange discoloration.
Can I use tap water?
Usually, yes. If your tap water has a strong chlorine smell or seems to inhibit activity, try filtered water. Use room-temperature water rather than hot water, and keep the water choice consistent while troubleshooting so it is easier to spot other causes.
Why did my starter rise and then stop rising?
A starter rises as gas builds and can flatten or fall after it has used much of its available food. That is a normal fermentation cycle. Mark the jar and note when the rise begins and when it recedes; use it near its peak or feed it again if you are continuing maintenance.
Can I save a starter with mold by removing the top?
No. Discard the entire starter if you see fuzzy growth or pink or orange discoloration. Removing only the visible spot does not reliably remove contamination. Clean the jar and utensils before starting a fresh culture.
Do I have to discard starter at every feeding?
Keep only the amount you plan to maintain and remove the excess before feeding. Without discarding, the jar grows quickly and the feed becomes too small relative to the culture. The removed portion can go into a cooked recipe if it has been stored safely and has no signs of spoilage.
Can I use a starter that smells like vinegar or nail polish remover?
A sour or acetone-like aroma can mean the starter is hungry. If it has no mold, unusual discoloration, or putrid odor, keep a small portion and refresh it. Let it rise, and repeat the refresh if needed until its aroma and rise become more balanced and predictable.
Does a starter need to double in a specific number of hours?
There is no single timing that fits every kitchen, flour, and starter. A warm, active starter can rise sooner than a cold or newly established one. Track the rise after feeding and look for a consistent pattern rather than treating one deadline as a pass-or-fail test.