UK hard cider is a fermented apple drink made from apple juice, yeast, and time. This small-batch method keeps the process straightforward and gives you control over sweetness and fizz, provided you use clean equipment and let fermentation finish before bottling.
Ingredients
- 4 litres (about 1 US gallon) preservative-free apple juice, at room temperature; check that it contains no potassium sorbate or sodium benzoate
- 1 packet (about 5 g) cider yeast, or wine yeast suitable for cider
- 1 teaspoon yeast nutrient, used according to its label
- Optional: 1 teaspoon pectic enzyme, for a clearer cider
- Optional, only if priming for bottle carbonation: 20 g dextrose (corn sugar) for 4 litres
Instructions
- Clean and sanitise. Wash a 5-litre food-grade fermentation vessel, airlock, bung, spoon, siphon, and any later bottling equipment. Sanitise every surface that will touch the juice or finished cider, following the product directions. Cleanliness matters: unwanted microbes can spoil a batch.
- Prepare the juice. Pour the juice into the sanitised vessel, leaving several centimetres of headspace for foam. If using pectic enzyme, add it at the amount specified on its package and allow the recommended time before pitching yeast. Do not boil the juice; heating can drive off fresh apple aroma and is unnecessary when using packaged juice.
- Add yeast. Check the juice temperature against the yeast packet, usually around 18–24°C (64–75°F), and adjust if needed. Add the yeast nutrient according to its label, then sprinkle or rehydrate the yeast as directed by the manufacturer. Fit the bung and airlock, filling the airlock to its marked line with the recommended liquid.
- Ferment. Keep the vessel in a dark or shaded place at the yeast’s recommended temperature, commonly 15–22°C (59–72°F). Fermentation may start within a day or two. It often takes 1–3 weeks, but bubbles stopping is not proof that it is finished. Avoid opening the vessel or stirring it during fermentation.
- Confirm fermentation is complete. For the safest, most reliable check, take gravity readings with a sanitised hydrometer. Readings should be unchanged over at least three days; a dry cider commonly finishes near 1.000, though the exact reading varies. If you do not have a hydrometer, wait until activity has ceased and allow several extra days, but do not assume that visual stillness guarantees completion.
- Choose still or sparkling cider. For still cider, siphon it into sanitised bottles, leaving sediment behind, and cap or cork securely. For naturally sparkling cider, dissolve 20 g dextrose in a little boiled water, cool it covered, and gently mix it evenly into the finished cider before bottling in pressure-rated beer bottles. This amount is a modest priming rate for 4 litres; do not add extra sugar by guesswork. Never use ordinary wine bottles for carbonated cider.
- Condition and chill. Keep sealed, pressure-rated bottles at room temperature for about 1–2 weeks to build carbonation, then chill one bottle thoroughly before opening. If carbonation is still low, give the remaining bottles more time. Open carefully over a sink. Once carbonated, refrigerate the bottles to slow further fermentation.
Tips
- Choose suitable juice: Plain apple juice without preservatives is easiest to ferment. Vitamin C (ascorbic acid) is generally fine; sorbate and benzoate can inhibit yeast. Cloudy juice works too, though the cider may remain hazy.
- Do not bottle too early: Fermentation continuing in a sealed bottle can create dangerous pressure and cause bottles to break. Use stable hydrometer readings before adding priming sugar or bottling.
- Keep everything sanitised: Rinse away visible dirt before sanitising, and follow the sanitiser’s contact-time instructions. Never put unsanitised spoons, fingers, or tasting equipment into the fermenter.
- Expect a dry result: Yeast consumes the juice’s natural sugar, so finished cider is usually less sweet than the original juice. Sweeten only with a method designed for fermented drinks, such as a non-fermentable sweetener or careful stabilisation; adding ordinary sugar to sealed bottles can restart fermentation.
Serving Suggestions
Serve still cider chilled in small glasses, or pour sparkling cider slowly to leave the yeast sediment in the bottle if you prefer a clearer drink. A light apple aroma pairs well with sharp cheddar, roasted pork, sausages, savoury pies, and salty snacks. For a simple warm seasonal drink, gently heat a pour with a cinnamon stick and orange peel; do not boil it, and avoid heating cider in a sealed container.
Variations
Berry cider: Ferment the apple juice as written, then add a small amount of clean, thawed berries during secondary fermentation. Use a roomy vessel because fruit can create foam, and sanitise any equipment used to add it.
Spiced cider: Add a cinnamon stick or a few cloves after primary fermentation and taste daily; remove the spices once the flavour is noticeable. Whole spices are easier to remove than ground spices, which can leave a gritty, persistent haze.
Still, naturally dry cider: Skip priming sugar and package only once fermentation is complete. For a sweeter still cider, do not simply add apple juice and cap it: fermentable sugar can restart fermentation. Use a tested stabilisation and backsweetening process, or sweeten each glass just before serving.
Storage and Reheating
Store sealed, still cider in a cool, dark place and use it within about 3–6 months for best flavour; refrigerate after opening and drink within 3–5 days. Keep bottle-conditioned cider chilled after it has carbonated, and handle bottles gently because sediment settles at the bottom. Homemade cider’s alcohol level and shelf stability are not guaranteed without testing, so discard it if you see mould, a damaged or leaking bottle, or notice an unmistakably rotten or otherwise unpleasant smell. Do not taste a suspect batch. There is no need to reheat cider for storage. To serve it warm, heat only the amount you plan to drink in an open pan until steaming, then serve promptly; do not boil or reheat it repeatedly.
Frequently Asked Questions
How long does homemade hard cider take?
Primary fermentation commonly takes 1–3 weeks, followed by time to confirm stable gravity readings. Sparkling cider then needs roughly 1–2 weeks at room temperature to carbonate, so allow several weeks from mixing to serving.
How alcoholic will this cider be?
Alcohol depends on the juice’s starting sugar, how completely it ferments, and the yeast. A typical juice-only batch may land around 4–6% alcohol by volume, but that is an estimate, not a measurement. A hydrometer can help calculate it from starting and final gravity readings.
Can I use supermarket apple juice?
Yes, if the ingredients are suitable and it has no potassium sorbate or sodium benzoate. Pasteurised juice is convenient; do not add extra sugar unless you have a specific recipe and understand how it changes the final strength and fermentation.
Why has fermentation not started?
Check the juice for preservatives, confirm the yeast is fresh and was pitched within its temperature range, and allow 24–48 hours for signs of activity. Airlock bubbles are not a perfect test, since a loose lid can leak gas; a hydrometer reading is more useful. If readings do not change after a couple of days, review the yeast instructions and sanitation before repitching.
Can I make it sweet and sparkling?
Yes, but sweetening and bottle carbonation need careful control. Adding sugar or juice to sealed bottles can cause excess pressure. Use a tested method that stops or controls fermentation and accounts for carbonation, or make a dry sparkling cider and add sweetness in the glass.
Can I make cider without an airlock?
An airlock is strongly recommended because it lets fermentation gas escape while limiting exposure to air and contaminants. Do not seal an actively fermenting vessel airtight. If using another fermentation lid, it must safely vent gas and be designed for food fermentation.