Gin gets its signature character from juniper berries, supported by a changing blend of spices, seeds, roots, and citrus peel. There is no single recipe for every gin, but understanding the common botanicals makes it easier to recognize the flavors—and to try a small, practical gin infusion at home.
Ingredients
- 700 ml (about 3 cups) neutral, unflavored vodka, 40% alcohol by volume
- 2 teaspoons dried juniper berries, lightly crushed
- 1 teaspoon coriander seeds, lightly crushed
- ¼ teaspoon angelica root, dried
- ¼ teaspoon orris root, dried
- 1 small strip of dried lemon peel, about 5 cm (2 inches), with little or no white pith
- 1 small strip of dried orange peel, about 5 cm (2 inches), with little or no white pith
- 1 green cardamom pod, lightly cracked
- 1 small piece of dried licorice root, about 1 cm (½ inch), optional
Instructions
- Prepare clean equipment. Wash and thoroughly dry a 1-liter glass jar, its lid, a fine-mesh strainer, and a funnel. Keep the vodka away from flames and heat; it is flammable.
- Crush the whole spices gently. Put the juniper berries and coriander seeds in a mortar and press just until cracked. Crack the cardamom pod too. Avoid grinding them to powder, which can make the infusion cloudy and difficult to strain.
- Combine the ingredients. Add the crushed juniper, coriander, angelica, orris, lemon peel, orange peel, and cardamom to the jar. Add the licorice only if you want a noticeably sweeter, rounded note. Pour in the vodka and close the lid.
- Infuse and taste. Leave the jar in a cool, dark place for 12 hours, then smell and taste a small spoonful. If the juniper and spice flavors are still too faint, continue infusing and check every 4 to 6 hours. Most batches are ready in about 24 to 36 hours. Citrus can become bitter if left too long, so remove the peel once its aroma is clear; do not assume a longer steep is better.
- Strain thoroughly. Pour the infusion through a fine-mesh strainer into a clean bottle. For fewer fine particles, strain it a second time through a coffee filter; this takes longer and may need to be done in batches. Do not squeeze the solids, which can push bitter, cloudy material into the drink.
- Rest before using. Seal the bottle and let it stand for at least 24 hours so the flavors can settle. Taste it neat in a small pour or mix a measured serving into a gin-style cocktail. This is a homemade botanical infusion, not necessarily a legally defined or commercially distilled gin.
Tips
- Keep juniper in the lead. Juniper provides gin’s defining piney, resinous flavor. Use food-grade dried juniper berries and start with the measured amount; avoid ornamental berries or foraged plants, which may be misidentified or unsafe.
- Measure potent additions carefully. Angelica and orris help give a blend earthy depth, while licorice can quickly dominate. If you cannot find a root, leave it out rather than replacing it with an equal quantity of another strong spice.
- Use pale peel. Thick white pith contributes bitterness. A vegetable peeler makes it easier to take just the colored outer layer. Dried peel is more predictable for this small-batch method than a large piece of fresh fruit.
- Make adjustments in a test glass. Before changing a whole batch, add a drop or two of a flavoring to a small measured sample. Infusion strength varies with the age and size of the botanicals, so tasting is more reliable than extending the steep blindly.
Serving Suggestions
Serve a 45 ml (1½-ounce) measure over ice with about 90 to 120 ml (3 to 4 ounces) of chilled tonic water. Add a strip of lemon peel or a few lightly crushed juniper berries as a garnish, then taste before adding more citrus; the infusion already contains peel. For a Martini-style drink, mix the infusion with dry vermouth and plenty of ice, then strain into a chilled glass. It also works in a simple highball with soda water. Drink responsibly, and do not serve alcohol to anyone below the legal drinking age.
Variations
More citrus-forward: Add one extra small strip of dried lemon peel, but taste after 8 to 12 hours and remove it when fragrant. Warm and aromatic: Add one small piece of cinnamon stick, about 2 cm (¾ inch), and check the flavor after 4 hours; cinnamon can take over quickly. Floral: Add ¼ teaspoon food-grade dried lavender and taste after 2 to 3 hours, removing it promptly to prevent a soapy or medicinal result. Skip the roots: If angelica or orris is unavailable, omit it; the drink will lack some of the earthy or blending notes found in many commercial gins, but it can still taste pleasantly juniper-led. Change only one botanical at a time so you can tell what it contributes.
Storage and Reheating
There is no reheating step: this is an alcoholic infusion intended to be served cold or at room temperature. Store the strained infusion in a clean, tightly sealed bottle in a cool, dark cupboard, away from heat and direct sunlight. For best flavor, use it within 3 months; it may remain drinkable longer if handled cleanly, but its citrus and spice aromas will gradually fade. Refrigeration is optional and does not make the infusion safer to drink. Discard it if you notice unexpected cloudiness that does not settle, mold, a damaged seal, or an off smell. Keep the bottle clearly labeled and out of reach of children.
Frequently Asked Questions
What spices are in gin?
Juniper is the essential defining botanical. Common supporting ingredients include coriander seed, angelica root, orris root, cardamom, cinnamon, and other spices, as well as citrus peel. The exact recipe differs by producer, and some ingredients are roots or fruit peels rather than spices in the narrow culinary sense.
Does every gin contain the same botanicals?
No. Juniper must give gin its characteristic flavor, but producers choose different supporting botanicals and proportions. A classic London Dry-style profile often emphasizes juniper, coriander, citrus, and earthy roots, while other styles may highlight floral, herbal, or fruit notes. Check the bottle or producer’s description for a particular gin’s ingredients.
Can I make gin without juniper?
You can make a spiced vodka infusion without juniper, but it will not have gin’s defining flavor and may not qualify as gin under applicable rules. For a gin-like home infusion, juniper should be the most recognizable botanical.
Why is my infusion bitter or too strong?
Common causes include leaving citrus peel in too long, using peel with lots of pith, crushing botanicals too finely, or over-infusing potent roots and spices. Strain the batch as soon as it tastes balanced. If it is already strong, dilute a small test portion with plain vodka before adjusting the whole bottle.
Can I use fresh juniper berries or fresh citrus?
Use food-grade dried juniper berries for a more predictable result, and never use unidentified wild berries. Fresh citrus peel can work, but it brings moisture and can turn bitter; use a thin strip with minimal pith and taste the infusion early. Dried peel is easier to measure and manage in this recipe.
Is homemade infused vodka the same as distilled gin?
No. This recipe flavors vodka by steeping botanicals; it does not distill alcohol. Commercial gin is made under regulations that vary by location, so a home infusion may be best described as gin-style infused vodka rather than gin for legal labeling purposes.