If you’ve recently reset your Ring camera and noticed two red lights blinking or steady on the device, you’re likely wondering what this means and whether it signals a problem. This list covers the most common reasons behind the two red lights on your Ring camera after a reset, providing clear explanations for each scenario. Whether you’re a new user troubleshooting your device or a seasoned owner facing unexpected behavior, this guide will help you understand what those red lights indicate and how to address them.
1. Camera Is in Setup Mode
After performing a factory reset, your Ring camera typically enters setup mode, indicated by two red lights. This signals that the device is ready to connect to your Wi-Fi network and be configured via the Ring app. The red lights act as a prompt for you to complete the setup process, ensuring the camera is properly integrated into your home security system.
2. Firmware Update in Progress
Two red lights can also mean your Ring camera is undergoing a firmware update following the reset. During this stage, the device downloads and installs the latest software to improve functionality and security. It’s important not to unplug or interrupt the camera during this process, as doing so could cause software corruption or incomplete updates.
3. Network Connection Failure
If the camera fails to connect to your Wi-Fi after reset, it may display two red lights as a warning. This usually happens if the Wi-Fi password entered is incorrect, the network is down, or the signal is too weak. In this case, verifying your network credentials and moving the device closer to the router can resolve the issue.
4. Device Is Experiencing a Hardware Fault
Persistent two red lights after reset can sometimes indicate a hardware malfunction, such as a faulty camera sensor or internal circuitry problem. Ring devices have self-diagnostic features that may trigger red warning lights when critical components fail. If troubleshooting steps don’t work, contacting Ring support for repair or replacement is recommended.
5. Battery or Power Supply Issues
For battery-powered Ring cameras, two red lights after reset can signal low battery or charging problems. Insufficient power can prevent the device from completing setup or normal operation. Ensuring the battery is fully charged or the power adapter is properly connected often clears this error state.
6. Security Lockout Due to Multiple Failed Attempts
After multiple failed login or setup attempts, your Ring camera might show two red lights as a security lockout feature. This protects your device from unauthorized access or tampering. Waiting a few minutes before retrying or resetting your Ring account password can help resolve this.
7. Internal Storage or Memory Error
Though less common, a red light indicator can signify problems with the camera’s internal memory or storage. Corrupted data from an interrupted reset or update process can trigger this warning. Performing a full factory reset again or contacting support can help fix memory-related issues.
8. Motion Detection Calibration Required
In some Ring models, two red lights after reset may indicate that motion detection sensors need recalibration. This can happen when the device’s position changes significantly or after a reset clears previous settings. Running the motion setup wizard in the Ring app recalibrates the sensors and extinguishes the warning lights.
9. Overheating or Environmental Warning
Ring cameras have temperature sensors that can cause red lights to appear if the device overheats or encounters extreme environmental conditions. After a reset, if the camera is placed in direct sunlight or a confined space, it may signal a warning to prevent damage. Moving the camera to a cooler, shaded area can resolve this.
10. Firmware Corruption or Failed Reset
If the reset process was interrupted or failed, the Ring camera’s firmware may become corrupted, causing it to show two red lights persistently. This state prevents the device from booting properly or connecting to your network. In such cases, performing a hard reset or contacting Ring support for advanced troubleshooting is necessary.
How to Choose
When diagnosing two red lights on your Ring camera after reset, focus first on the device’s behavior and context. Is it blinking or solid? Does it respond to app commands? Check the Ring app notifications for error messages, which often give clues about network or power issues. Prioritize simple fixes like verifying Wi-Fi credentials, ensuring power supply, and completing setup steps before assuming hardware failure. If problems persist, Ring’s official support channels and troubleshooting guides are the most reliable resources. Avoid guessing or trying unofficial firmware fixes, as these can void warranties or damage the device.
Frequently Asked Questions
Why are my Ring camera’s red lights blinking after reset?
Blinking red lights usually mean the camera is in setup mode or attempting to connect to Wi-Fi. Complete the setup in the Ring app to proceed.
Can I ignore the two red lights on my Ring camera?
No, red lights generally indicate an issue or status that requires attention, such as setup completion, errors, or warnings.
How long should the red lights stay on after a reset?
Typically, red lights last only during setup or firmware updates—usually a few minutes. Persistent red lights indicate a problem.
Will a factory reset fix the red light issue?
A factory reset can resolve software glitches but won’t fix hardware faults or power issues causing red lights.
Is it safe to unplug my Ring camera during two red lights?
It’s best to avoid unplugging during firmware updates or setup indicated by red lights to prevent corruption or incomplete installation.
How do I contact Ring support for persistent red light problems?
You can reach Ring support via their website, app, or phone for troubleshooting, repair, or replacement options.
Final Thoughts
Two red lights on your Ring camera after a reset can indicate a range of conditions—from normal setup modes to hardware or network issues. Understanding these signals helps you diagnose the problem accurately and take appropriate action. Always start with simple checks like Wi-Fi connection and power status, then proceed to app-based troubleshooting. If the issue persists, professional support is the safest route to restore your camera’s functionality and maintain your home security.
Related
- Easy Pancake Recipes for Beginners: Simple Steps to Fluffy Pancakes
- How to Make Pancakes Without Eggs: Easy Step-by-Step Guide
- Hands Clasped in Front During Interviews: What It Signals and Why