Mets Minor League Blog

Music theory, instruments and musicians

Mets Minor League Blog

Music theory, instruments and musicians

How to Make Adobe Mortar: A Simple Guide

Adobe mortar is the traditional earthen mix used to bind adobe bricks together in walls, ovens, and other natural building projects. Making your own is straightforward, inexpensive, and uses locally available materials. This guide covers the basic process, the right proportions, and how to avoid common pitfalls so your wall stays solid for years.

What You’ll Need

  • Clay-rich soil (often called adobe dirt or subsoil)
  • Sand (coarse, sharp sand works best)
  • Water
  • Optional: straw or other plant fiber (for extra strength and crack resistance)
  • A mixing container or wheelbarrow
  • A shovel or hoe for mixing
  • A tarp or flat surface for mixing
  • Gloves (optional, but helpful)

Step-by-Step

  1. Test your soil. Before mixing a large batch, check if your soil has enough clay. Take a handful of dry soil, wet it, and form a ball. Let it dry completely. If the ball crumbles easily, the soil is too sandy and you’ll need to add more clay. If it stays hard and doesn’t crack much, it’s likely good for adobe.
  2. Gather your materials. For a basic batch, use a ratio of about one part clay-rich soil to two or three parts sand. The exact ratio depends on your soil’s clay content. More clay means more shrinkage and cracking, so sand is essential to reduce that.
  3. Mix the dry ingredients. On a clean, flat surface or in a wheelbarrow, combine the soil and sand thoroughly. Use a shovel or hoe to turn the pile until the color is uniform and there are no clumps of pure clay or sand.
  4. Add water gradually. Make a depression in the center of the dry mix and pour in a small amount of water. Start mixing, adding water a little at a time. The goal is a stiff, dough-like consistency—similar to cookie dough. It should hold its shape when squeezed but not be soupy or runny.
  5. Mix thoroughly. Continue turning and kneading the mortar until every particle is wet and the mix is homogeneous. This can take several minutes. If you’re using straw, add it now, a handful at a time, and mix it in evenly.
  6. Test the consistency. Pick up a handful of mortar and form a ball. Drop it from about waist height onto a hard surface. If it splatters and flattens, it’s too wet. If it crumbles apart, it’s too dry. A good mortar will hold together and only slightly flatten.
  7. Use the mortar. Apply the mortar in a thick bed, about the thickness of your thumb, onto the adobe bricks. Press the next brick into place, and scrape off any excess mortar that squeezes out. You can tool the joints with a stick or trowel for a neat finish.
  8. Keep it moist while working. If you’re working over a long period, cover the mortar pile with a tarp or wet burlap to keep it from drying out. If it starts to stiffen, add a little water and remix.
  9. Clean up. Rinse your tools and containers before the mortar dries. Dried adobe is hard to remove once set.

Common Mistakes

  • Too much clay. Using soil with high clay content without enough sand leads to excessive shrinkage and large cracks as it dries.
  • Too much water. A soupy mix will shrink more and weaken the wall. It also takes much longer to dry, which can cause mold or efflorescence.
  • Not mixing enough. If the mortar is not thoroughly mixed, you’ll have pockets of pure clay or sand that create weak spots.
  • Using the wrong sand. Fine, rounded sand (like play sand) doesn’t provide as much structural grip as coarse, angular sand. If you only have fine sand, you may need to use a bit more of it.
  • Ignoring the weather. Mortar that dries too quickly (in hot, windy conditions) will crack. Mortar that gets rained on before it sets can wash out.

Tips

  • Test a small batch first. Always make a small test batch and let it dry completely to see how it behaves before committing to a large mix.
  • Use the ‘jar test’ to check soil composition. Put some soil in a clear jar, add water, shake, and let it settle. The sand will sink first, then silt, then clay on top. This shows you the proportions in your soil.
  • Add straw for tensile strength. Straw helps hold the mortar together and reduces cracking, especially in areas with temperature swings. Use chopped straw, not whole stalks.
  • Keep the mortar covered. Between uses, cover the pile with a tarp to prevent evaporation. If it dries out, you can re-wet it and remix.
  • Work in the shade. If possible, mix and apply mortar in a shaded area to slow drying and give you more working time.

Troubleshooting

  • Mortar is too sticky and hard to work. This usually means too much clay. Add more sand and mix well.
  • Mortar crumbles when dry. This indicates too much sand or not enough clay. Add more clay-rich soil to the mix.
  • Large cracks appear as it dries. This is a sign of too much clay or water. Reduce the clay content or use less water next time. You can also add straw to help control cracking.
  • Mortar is drying too fast and cracking. Mist the wall with water periodically and cover with a tarp to slow the drying process.
  • Mortar won’t stick to the bricks. Make sure the bricks are slightly damp (but not wet) before applying mortar. Very dry bricks will suck the moisture out of the mortar too quickly.

Frequently Asked Questions

  • Can I use any soil to make adobe mortar? No, you need soil with a good balance of clay and sand. Soil that is too sandy won’t bind, and soil that is too clay-heavy will crack. Test your soil first.
  • How long does adobe mortar take to dry? It depends on temperature, humidity, and thickness. It can take from a few days to a couple of weeks to fully cure. It should be kept moist for the first few days to prevent cracking.
  • Is adobe mortar waterproof? No, adobe is not waterproof. It needs a protective coating or overhanging roof to keep rain from eroding it. However, it can withstand light moisture if properly maintained.
  • Can I use adobe mortar for a pizza oven? Yes, adobe is excellent for ovens because it holds heat well. Just make sure the mix is well-balanced and you cure the oven slowly to avoid cracking from thermal shock.
  • Do I need to add cement to adobe mortar? No, traditional adobe uses only earth and water. Adding cement changes the properties and is not necessary for most projects. Some people add a small amount of lime for extra durability, but it’s optional.
  • How do I store leftover adobe mortar? Keep it in a covered container or pile, and it can be reused for days as long as it doesn’t dry out. If it dries, you can break it up and rehydrate it with water.
How to Make Adobe Mortar: A Simple Guide
Scroll to top